IRONMAX Rolling Tool Chest Installation and Safety Manual

Important Information

When you open the cartons, carefully check the contents and make sure there is no damage. If you have any problems or you find any parts damaged or missing, please contact us first.

Do not return the product to the store before contacting us. Do not dispose of your cartons until you are completely satisfied with your products.

To reduce the risk of injury, the user should read and understand this owner's manual before assembling and using these products for the first time.

Safety Guidelines

[!] WARNINGUse two or more people to move, assemble, and install the product to avoid any injury.

[!] WARNINGDO NOT leave children unattended near the product.

[!] WARNINGDO NOT stand on the product or lean on the drawers or worktop.

[!] WARNINGWEAR SAFETY GLASSES when removing or repositioning the slides. The tools could slip, which may cause personal injury.

[!] WARNINGDO NOT alter the product in any manner. For example, do not weld external lock bars or attach unapproved electrical equipment. This may cause product damage, personal injury, or death.

[!] WARNINGDO NOT OVERLOAD PRODUCTS! The components of the product are designed to maximum weight capacities 90kgs(200lbs).

[?] CAUTIONBE CAREFUL when opening more than one drawer. The product could become unstable and tip, which may cause product damage or personal injury.

[?] CAUTIONHigh risk of tipping if the product is not installed correctly. Securely attach the product to the wall to avoid serious injury.

Unpacking

Please make sure you have received all your packages for this product.
Start by placing the package on flat covered ground.
Remove all cardboard, honey comb board, foam packaging material and clear plastic bags.
Recycle all packaging materials.
Verify all the contents are included and gather the tools required.

Parts List

Image Description	Part No.	Quantity
[Image: A 6-drawer rolling tool chest]	1	1
[Image: A 2-drawer detachable top chest unit]	2	1
[Image: Set of 4 swivel casters/wheels]	3	4
[Image: Screws, likely for handle or side panel attachment]	4	4
[Image: Screws, likely for side panel attachment]	5	4
[Image: Drawer slides, set for multiple drawers]	6	4
[Image: Keys for locking the tool chest]	7	2
[Image: A side handle for the tool chest]	8	1

Assembly Instructions

Remove Chest

Place cabinet on a level surface.

Remove the screws holding the chest inside the cabinet.

Slowly remove chest from the cabinet.

[Diagram: Illustrates removing screws (labeled '1') that secure an inner chest unit (labeled '2') within the main cabinet. A screwdriver is shown in use.]

Caster Assembly

Slightly spread apart split bearing on shaft if it fits loose.

Crimp split bearing slightly with pliers.

Make only slight adjustments until caster fits properly.

[Diagram: Shows casters (part 3) being attached to the base of the cabinet. A screwdriver is depicted for the process.]

Assemble Side Panel

Assemble screws with a screwdriver.

[Diagram: Depicts screws (part 5) being used with a screwdriver to attach a side panel to the main cabinet body.]

Handle Assembly

Attach the handle using the provided screws.

[Diagram: Shows the side handle (part 8) being secured to the cabinet using screws (part 4).]

Usage and Maintenance

Drawer Operation and Capacity

[!] WARNING

Lubricate the top and the bottom channels of the drawer slides at least twice a year.
Do not open more than one loaded drawer at a time.
The maximum loading capacity is 90kgs(200lbs).

[Diagram: Close-up views of drawer slides. One shows a drawer being pushed upwards on one side, suggesting a locking or seating mechanism. The other shows a drawer being pushed downwards on the opposite side.]

California Proposition 65 Warning

WARNING:This product contains chemicals known to the State of California to cause cancer and birth defects or other harm. Wash hands thoroughly after handling. Failure to heed these warnings may result in personal injury and/or property damage.