TOKISTAR GRADIENT OUTDOOR with L-Guard
Product Number: GRX02L- K- D-L
Document Revision: 1, Date: 2025/7/31 (Original Date: 2025/7/30)
Specifications
| Specification | Details |
|---|---|
| LED spacing | 75mm |
| Color temperature | 30K (3000K), 40K (4000K) |
| Beam angle | 15D (15°), SP (Spread/40° x 15°), 08D (8°, custom) |
| CRI | 85 |
| IP rating | IP66 |
| Length (mm) | Number of LEDs | Voltage (VDC) | Power Consumption (W) | Weight (g) |
|---|---|---|---|---|
| L300 | 4 | 12 | 24 | 620 |
| L600 | 8 | 24 | 24 | 1200 |
| L900 | 12 | 36 | 36 | 1800 |
Important Notes
? DC power supply for LEDs is required (LDR24-96).
? Ensure that the waterproof connectors are clean and free of foreign matter.
? Please tighten the connectors securely to prevent slack.
? Attach the waterproof End Cap to the last fixture in the series.
? When extending GRX Lead Cables, ensure proper waterproofing and insulation treatment for the entire length.
? The feed connection can support up to 2.4m (4A @ 24VDC/output) for the total length of fixtures installed without gaps. For fixtures spaced apart, the number of connectable devices may vary due to voltage drop. Please contact TOKISTAR for details.
Diagram Descriptions
Overall Fixture Layout
The main diagram illustrates a linear LED fixture. It shows different length configurations (L300, L600, L900) with corresponding overall lengths indicated in millimeters. Mounting strap holes are visible, along with connection points for power and signal cables. The fixture features multiple LED modules spaced along its length.
Adjustable Mounting Bracket
A detailed view shows an adjustable bracket designed for mounting the fixture. The bracket allows for angular adjustments, with specific mentions of 90° and 50° tilt capabilities.
Minimum Installation Space Requirements
Diagrams illustrate the minimum clearance required for different installation methods:
- Surface Mounting: Requires 20mm width and 70mm height clearance.
- Ceiling Mounting: Requires 50mm width and 70mm height clearance.
- Enclosed Installation: Requires 50mm width and 70mm height clearance.
A note specifies that when tilting the extrusion 90°, the minimum installation space is as depicted, and the center axis of the fixture installation should be offset by approximately 14mm.
Connection Details
The connection diagram shows the GRX Lead Cable, which includes connectors for power and dimming signals. Wire color coding is as follows: Red for 24VDC+, Black for 24VDC-, Blue for Dimming signal, and White for Dimming signal. Options for cable lengths (3m and 10m) with end caps are available.
Parts List
| No. | Parts | Material | Memo |
|---|---|---|---|
| 1 | Extrusion | AL | Surface treatment: Black paint |
| 2 | Cover | AL | Surface treatment: Black paint |
| 3 | Mounting Bracket | SUS | Surface treatment: Black paint |
| 4 | LED Lens Cover | PC | Surface treatment: Black paint |
| 5 | Power cable with Connector (input) | PVC/PA6 | |
| 6 | Power cable with Connector (output) | PVC/PA6 | |
| 7 | L-Guard | SUS |
