VASAGLE Rolling Cart

Parts List

• A: Top Shelf (x1)
• B: Top Side Frame (x1)
• C: Top Side Frame (x1)
• D: Handle (x1)
• E: Vertical Support Rod (x4)
• F: Vertical Support Rod (x4)
• G: Wire Mesh Basket (x4)
• H: Short Horizontal Bar (x8)
• I: Short Horizontal Bar (x4)
• J: Caster Wheel (x4)

Hardware List

• 1: Screw M6 x 12 mm (x12)
• 2: Screw M6 x 25 mm (x38)
• 3: Allen Wrench (x1)
• 4: Wrench (x1)

Tools Required

• Phillips Head Screwdriver
• Flathead Screwdriver
• Drill
• Pencil

Assembly Instructions

1. Step 1: Prepare Side Frames

   Take two vertical support rods (E) and connect them using two short horizontal bars (H) at the top and bottom. Secure each connection with two screws (2). Repeat this process to create a second identical frame.

2. Step 2: Prepare Other Side Frames

   Take two vertical support rods (F) and connect them using two short horizontal bars (H) at the top and bottom. Secure each connection with two screws (2). Repeat this process to create a second identical frame.

3. Step 3: Connect Side Frames

   Take one E/H frame and one F/H frame. Connect them using two short horizontal bars (I) between the top and bottom of the frames. Secure each connection with two screws (2). Repeat this to create the second side assembly.

4. Step 4: Assemble Main Structure

   Take the two side assemblies created in Step 3. Use the remaining four vertical support rods (E) and four vertical support rods (F) as the main uprights. Attach the remaining four short horizontal bars (H) between the E and F uprights using screws (1). This forms the main frame structure.

5. Step 5: Attach Top Frame Piece B

   Attach the U-shaped top side frame (B) to one side of the assembled structure using two screws (1).

6. Step 6: Attach Top Frame Piece C

   Attach the U-shaped top side frame (C) to the other side of the assembled structure using two screws (1).

7. Step 7: Attach Handle

   Attach the handle (D) to the top of the structure using two screws (2).

8. Step 8: Attach Caster Wheels

   Attach the four caster wheels (J) to the bottom of the vertical support rods (E and F) using screws (2) and the wrench (4).

9. Step 9: Insert Baskets

   Slide the four wire mesh baskets (G) into the designated slots within the assembled frame.

10. Step 10: Attach Top Shelf

    Place the top shelf (A) onto the top of the assembled structure. Secure it using four screws (2).

Specifications

Weight Capacity:

• Top Shelf: Maximum 10kg (22lb)
• Each Basket: Maximum 10kg (22lb)

Safety Warnings

• Keep small parts out of children's reach during assembly; they can be fatal if swallowed or inhaled.
• Prevent children from climbing or playing on the product to avoid serious injury from tipping.
• Assemble strictly according to manufacturer's instructions to prevent safety risks.
• If parts are defective or missing after unpacking, stop assembly immediately and contact the supplier.
• Unauthorized modifications can compromise product safety.