Liberty Garden 840 Four Wheel Hose Cart
Owner's Manual
MODEL #840
ATTACH YOUR RECEIPT HERE
Liberty Garden™ Products
“Liberty” is a registered trademark of Liberty Garden Products, Inc. Kernersville, NC. All Rights Reserved
PRODUCT SPECIFICATIONS
SPECIFICATIONS | SPECIFICATIONS |
---|---|
250' of 5/8" Hose Capacity | Low Center of Gravity Prevents Tipping |
19 Gauge Steel Construction | Color: Bronze |
5' Leader Hose | Height: 37" |
All Brass Fixtures | Width: 24" |
90° Brass Swivel | Depth: 33" |
Four 10" Flat Free Tires | Weight: 34.00 lbs |
Durable Powder Coat Finish |
HARDWARE CONTENTS (Drawings are not to scale)
The hardware displayed below is included with the product.
1. Connector
2. Brass Tee
3. U-Bushing
4. Bolt
5. Lock Nut
6. Bolt
7. Wing Nut
8. Wheel Axle
9. Axle Nut
10. Axle Washer
11. Rubber Handle with Nut
17. Rubber O-Ring
PACKAGE CONTENTS
PART | DESCRIPTION | QUANTITY | PART | DESCRIPTION | QUANTITY |
---|---|---|---|---|---|
1 | Brass Swivel | 1 | 11 | Rubber Handle With Nut | 1 |
2 | Brass Tee | 1 | 12 | Frame | 1 |
3 | U-Bushing | 1 | 13 | Flat Free Tires | 4 |
4 | M6 x 1.75" Bolt | 4 | 14 | U-Handle | 1 |
5 | Lock Nut | 4 | 15 | Spool with Spacer Washers and Spring | 1 |
6 | M8 x 1.75" Bolt | 2 | 16 | Leader Hose | 1 |
7 | Wing Nut | 2 | 17 | Rubber O-Ring | 1 |
8 | Wheel Axle | 2 | 18 | Crank Arm | 1 |
9 | Axle Nut | 4 | |||
10 | Axle Washer | 4 |
SAFETY INFORMATION
! Please read and understand this entire manual before attempting to assemble, operate or install the product.
- READ ALL INSTRUCTIONS CAREFULLY AND BE SURE THEY ARE FULLY UNDERSTOOD BEFORE USING THE HOSE CART.
- DO NOT load more than 250 feet of hose onto the cart.
- Distribute the hose evenly over the surface of the drum assembly.
- DO NOT exceed maximum water pressure of 125 PSI.
- DO NOT expose the unit to freezing temperatures while water remains in the plumbing system. Freezing temperatures can crack the brass swivel causing damage to the unit. Drain water from the hose cart and store indoors during freezing temperatures.
- DO NOT leave water running through the hose cart while not in use or unsupervised.
- DO NOT consume water from garden hose, it is not rated for human consumption.
- Turn off water source when not in use. Do not leave hose pressurized when not in use.
- If any parts become damaged, broken, or misplaced, do not use the hose cart until the parts have been repaired or replaced.
- DO NOT use the hose cart on surfaces that can cause damage to the wheels.
- It is recommended that the hose cart be inspected for damage before each use.
- KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
! WARNING This product contains one or more chemicals known in the state of California to cause cancer and birth defects or reproductive harm. Wash hands after handling.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 30 minutes.
Tools required for assembly (not included): Adjustable Wrench x 2 ?
ASSEMBLY INSTRUCTIONS
STEP 1:
Locate the frame (12) and place it on a flat surface. Insert the wheel axles (8) through the frame (12) and into the tires (13), as shown. Slide the washers (10) onto the wheel axles, followed by the axle nuts (9). Tighten axle nuts using two adjustable wrenches.
Frame with wheels attached. Axle nuts and washers shown.
Axle Nut ?
Axle Washer ⚪
STEP 2:
Insert the brass swivel (1) through U-Bushing (3) and into the brass tee (2), then tighten securely. Screw the brass tee onto the end of the spool (15). Set spool onto the frame, then align the U-Bushing holes with the holes in the frame. Insert the 1.75" bolts (6) through the U-Bushing and frame holes, then fasten the lock nuts (5) onto the 1.75" bolts.
! WARNING: Do not over tighten brass swivel in order to provide an optimal seal.
Assembly of brass swivel, tee, and spool onto the frame.
M8 x 1.75 Bolt x 4 ?
Lock Nut x 4 ?
STEP 3:
Slide U-handle (14) onto the frame (12). Align the holes at the bottom of the U-handle with holes in the frame, then insert 1.75” bolts (4) through the holes. Screw wing nuts (7) onto bolts and tighten securely.
Attaching the U-handle to the frame with bolts and wing nuts.
M6 x 1.75 Bolt x 2 ?
Wing Nut x 2 ?️
STEP 4:
Attach the leader hose (16) to the brass swivel.
Connecting the leader hose to the brass swivel.
STEP 5:
Attach your garden hose to the brass adapter on the brass tee. Loop the hose over the spool end, as shown.
Looping the garden hose over the spool.
STEP 6:
Attach the rubber handle (11) to the crank arm (18) using the handle bolt and nut, then tighten securely.
Attaching the rubber handle to the crank arm.
Nut x 1 ?
CARE AND MAINTENANCE
Rust
Your hose cart will give you many years of reliable and functional hose storage. However, with any steel product there is a chance for rust to develop over time. Minor surface damage may occur during shipping, assembly, or during installation. If any base metal is exposed to the elements for an extended period of time, rust will develop. Additionally, rust acceleration can be caused by exposing the hose cart to yard fertilizers or leaving the hose cart in long grass.
It is highly recommended that you periodically inspect your hose cart for minor scratches that can easily be repaired by using automotive touch-up paint.
Inspecting the hose cart after each season and protecting the finish will help prevent rust and prolong the life of the product. Store the product indoors before winter and consider a cover for your hose cart.
Leaks
Your hose cart is manufactured with the finest quality components available. All components are manufactured to rigorous quality standards not common in other consumer grade hose carts available today. When you assemble your hose cart, be sure the hose washers are in place and all fittings are secure. DO NOT OVER TIGHTEN as you might damage the components. If you live in more temperate climates, be sure to drain the unit of any residual water before storing. DO NOT EXPOSE THE UNIT TO FREEZING TEMPERATURES while water remains in the plumbing system.
- Ensure the hose washers are in place.
- Ensure all fittings are secure and tight.
- Check the head of the brass swivel for damage if the unit has been exposed to freezing temperatures.
- The brass swivel uses two rubber O-Rings which over time can wear out. Replacement O-Rings can be found at our website: www.libertygardenproducts.com ?
TROUBLESHOOTING
Problem: Your new hose cart is leaking at the brass swivel.
Solution: It is normal for the brass swivel to leak slightly until the O-Rings are wet and have seated. If the leaking continues, you do not need to take the hose cart back to the store. This is a simple problem and is easily fixed by following the troubleshooting procedures outlined on page 8.
Problem: The brass swivel head is not rotating, causing the leader hose to kink.
Solution: Remove leader hose and turn the square head of the brass swivel several times and apply silicone lubricant.
Problem: Leaking Fixtures (brass tee; brass coupling; swivel)
Solution: Apply Teflon/Plumber's Tape to the threads on the brass swivel shaft and ensure the fixtures are tight.
TROUBLESHOOTING (continued)
- If the leader hose is attached to the brass swivel, unscrew the hose and look inside the swivel.
- Using either a 3/8" hex key or a large screw driver, insert the tool into the hex opening and gently tighten the threaded insert. DO NOT OVER TIGHTEN!
- This should stop the leaking.
- If the unit still leaks, please ensure the hose washer is inside the nut. You may contact Liberty Garden for a new hose washer or obtain one at any local hardware store.
- If the brass swivel is old, the O-Rings may be worn, please contact Liberty Garden for a new set of O-Rings.
- If these steps do not solve the leak problem, contact Liberty Garden.
Diagram showing the components of the swivel: Shaft, O-Ring, Housing, O-Ring, Snap Ring, Insert, Washer, O-Ring, Nut.
Spray lubricant at these points to lubricate the O-Rings and Washer. ?
LIBERTY GARDEN PRODUCTS LIMITED WARRANTY
(Effective July 21, 2025)
This limited warranty is applicable to each original end-customer (hereinafter “Customer”) purchasing the model 840 four wheel hose reel cart consisting of the structural metal frame and spool (hereinafter the "Structural Frame") and various other non-frame components (hereinafter the “Non-Frame Parts") sold by Liberty Garden Products, Inc. (hereinafter “Company”) for Customer's own use and not for resale. The Structural Frame and Non-Frame Parts are collectively referred to herein as the “Products”.
1. LIMITED WARRANTY; EXCLUSIVE REMEDIES:
1.1. LIMITED WARRANTY ON PRODUCTS:
Company warrants solely to the original Customer that (a) the Structural Frame will be free from defects in materials and workmanship under normal use for a period of three (3) YEAR(S) from the date of original retail purchase, and (b) the Non-Frame Parts (which consist of the crank handle, swivel and water connections, leader hose and tires), will be free from defects in materials and workmanship under normal use for a period of ONE (1) YEARS from the date of original retail purchase. Notwithstanding the foregoing, the colors and finishes of the Products may vary within a reasonable scope due to unavoidable color variations in different production batches, and such variations shall not constitute a material defect. This limited warranty is limited solely to the original Customer with proof of purchase and is not transferable.
1.2. THE WARRANTY:
During a covered Product's limited warranty period, Company will, at Company's sole option and discretion, (1) repair the defective component or product without charge or (2) replace the defective component or product without charge.
1.3. Exclusion of Defects:
The foregoing limited warranty is subject to the Customer's proper storage, transportation, handling and use of the Products as the same are defined within Company's then-current published guides and instructions for use and care. The limited warranty does not include defects due to normal wear and tear, abuse or misuse, mishandling, neglect, accident, fire, lightning, sunlight or other natural hazard, delivery or transportation damage, failure to follow applicable directions or instructions, or improper or inadequate cleaning, maintenance, care, repairs, modifications, or use beyond a Product's intended use. Please note that since the Structural Frame is made from steel rust may occur over time. As such, this limited warranty does not include rust or defects due to the same.
1.4. LIMITED WARRANTY CLAIMS PROCEDURE:
To obtain performance under this limited warranty, Customer shall notify Company in writing (to Liberty Garden Products, Inc., 1161 South Park Drive, Kernersville, NC 27284, Attn: Customer Service / Warranty Department), by email (to customerservice@libertygardenproducts.com), or by telephone (to (336) 992-3595) with a full description of the defect that is covered by warranty and a copy of the dated proof of purchase of the applicable product.
- Company shall review each such claim and issue Customer a return merchandise authorization (“RMA”) in the event that the described defect or condition merits warranty review as determined by Company. Customers who have been issued a RMA shall, at Company's election, return the covered item to the same physical address listed above for reporting initial claims. Company shall not accept any returned product without a RMA.
- Upon receipt, Company will evaluate the returned product(s) to determine if there is a warranty claim and, if so, how Company wishes to remedy the same. During a covered product's respective limited warranty period, Company will, at Company's sole and absolute option and discretion, (1) repair the defective component or product without charge or (2) replace the defective component or product without charge. Refunds are not available pursuant to this limited warranty.
- Customer is solely responsible for transportation of the covered product(s) to the Company for evaluation (if applicable and requested by Company). In the event that Company determines that a claim under this limited warranty is justified, Company shall be responsible for transporta-tion of the repaired, corrected, replaced or exchanged product back to Customer. Customer shall be solely responsible for the transportation of any product back to Customer if Company determines that a claim under this warranty is not justified.
- Any repaired, corrected, replaced or exchanged Products shall be subject to the Limited Warranty set forth to the duration of the original limited warranty period as set forth in Section 1.1. and not for any extended duration, following their repair, correction, replacement or exchange.
1.5. EXCLUSIVE REMEDIES:
IF A COMPANY PRODUCT DOES NOT CONFORM TO THESE LIMITED WARRANTIES, THE PURCHASER'S SOLE AND EXCLUSIVE REMEDY IS, AT COMPANY'S SOLE AND EXCLUSIVE OPTION, THE (1) REPAIR OF ANY DEFECTIVE PRODUCT OR COMPONENT PART OR (2) REPLACEMENT OF ANY DEFECTIVE PRODUCT OR COMPONENT PART. THE LIMITED WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND MADE IN LIEU OF ALL OTHER WARRANTIES, REMEDIES, RIGHTS OR CONDITIONS, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. COMPANY SPECIFICALLY DISCLAIMS, WITHOUT LIMITATION, ANY AND ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND. IF COMPANY CANNOT LAWFULLY DISCLAIM IMPLIED WARRANTIES UNDER THIS LIMITED WARRANTY, ALL SUCH WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THIS LIMITED WARRANTY. The Company does not assume or authorize any person to assume for them any other liability in connection with the Products.
LIBERTY GARDEN PRODUCTS LIMITED WARRANTY (continued)
2. EXCLUSION AND LIMITATION OF LIABILITY:
IN NO EVENT, WHETHER BASED ON CONTRACT OR TORT OR OTHER LEGAL THEORY, SHALL COMPANY BE LIABLE FOR ANY INDIRECT, INCIDENTAL, PUNITIVE, SPECIAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES TO OTHER PROPERTY, INCONVENIENCE, DAMAGES FOR LOSS OF PROFITS, REVENUE, GOODWILL OR USE, INCURRED BY CUSTOMER OR ANY THIRD PARTY, WHETHER IN AN ACTION IN CONTRACT, TORT, STRICT LIABILITY, OR IMPOSED BY STATUTE, OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some states do not allow the exclusion or limitation of incidental or consequential damages or exclusions or limitations on the duration of implied warranties or conditions, so the above limitations or exclusions may not apply to Customer. In jurisdictions that limit the scope of or preclude limitations or exclusion of remedies or damages, or of liability, such as liability for gross negligence or willful misconduct or do not allow implied warranties to be excluded, the limitation or exclusion of warranties, remedies, damages or liability set forth above are intended to apply to the maximum extent permitted by applicable law. This limited warranty gives the Customer specific legal rights, and the Customer may also have other rights that vary by state, country or other jurisdiction.
3. SEVERABILITY:
If any provision of this limited warranty is held to be illegal, invalid or otherwise unenforceable, such provision will be enforced to the extent possible consistent with its stated intention, or, if incapable of such enforcement, will be deemed to be severed and deleted from this limited warranty, while the remainder of the terms of this limited warranty will continue in full force and effect.
4. DISPUTE RESOLUTION:
This Liberty Garden Products, Inc. Limited Warranty shall be governed by and construed in accordance with the laws of the State of North Carolina, without regard to its principles of conflicts of law. The parties acknowledge the exclusive jurisdiction of the federal and state courts of the State of North Carolina. Any claims or disputes under this Liberty Garden Products, Inc. Limited Warranty shall be heard exclusively in any state or federal courts sitting in Guilford County, North Carolina, and both parties expressly consent to the personal jurisdiction and venue of the North Carolina state and federal courts for such actions.
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department toll free at 1-866-820-5805, 9 a.m. - 5 p.m., EST, Monday - Friday. You may also contact us at customerservice@libertygardenproducts.com ?
Diagram showing all parts of the hose cart with labels A-T.
PART | DESCRIPTION | PART # | PART | DESCRIPTION | PART # |
---|---|---|---|---|---|
A | Brass Swivel | 840-1 | K | Rubber Handle With Nut | 840-11 |
B | Brass Tee | 840-2 | L | Frame | 840-12 |
C | U-Bushing | 840-3 | M | Flat Free Tires | 840-13 |
D | M6 x 1.75" Bolt | 840-4 | N | U-Handle | 840-14 |
E | Lock Nut | 840-5 | O | Spool | 840-15 |
F | M8 x 1.75" Bolt | 840-6 | P | Leader Hose | 840-16 |
G | Wing Nut | 840-7 | Q | Crank Arm | 840-17 |
H | Wheel Axle | 840-8 | R | Rubber O-Ring | 840-18 |
I | Axle Nut | 840-9 | S | Spacer Washer | 840-19 |
J | Axle Washer | 840-10 | T | Spring | 840-20 |
Liberty Garden Products
“Liberty” is a registered trademark of Liberty Garden Products, Inc. Kernersville, NC. All Rights Reserved 2025
Updated 07/21/2025
File Info : application/pdf, 12 Pages, 956.58KB
DocumentDocument