Home - Connect SmartHome
Laser: The Ultimate Tech Hub for Home Entertainment, Audio, ...
User Manual for CONNECT models including: CSH-LTVSY-279 Smart TV Backlight LED Strip, CSH-LTVSY-279, Smart TV Backlight LED Strip, Backlight LED Strip, LED Strip
Laser Smart Home TV Sync Light Strip - RGB, WiFi, Alexa
File Info : application/pdf, 15 Pages, 1.54MB
DocumentDocumentUser Manual AmbiColour Smart TV Backlight LED Strip CSH-LTVSY-279 WHAT'S IN THE BOX · TV backlight box · 6m LED light strip · 1m HDMI cable · Power adaptor · User manual What you will need: · TV · External device with HDMI output · Smartphone or tablet with Bluetooth and connected to 2.4GHz band Wi-Fi network · Password for the Wi-Fi network OVERVIEW 7 2 1 3 4 5 6 1. Power button 2. Wi-Fi connection status indicator 3. HDMI In 4. HDMI Out 5. USB port for light strip 6. Power input 7. Microphone (on the front panel) INSTALLATION INDOOR USE ONLY 1. Install the light strip on the back of the TV in a clockwise direction. · Suitable for up to 85" TV · Installation start point must be at the location of the red arrow to match the colour of the TV Ensure back of the TV is free of dust and water before installing. 2. Connect cables. Plug in: · An HDMI cable from the external device (gaming console, set top box, DVD/Blu-Ray player) to the HDMI IN port on the backlight box. INSTALLATION continued... · One end of the supplied HDMI cable to the HDMI OUT port of the backlight box; plug in the other end to the TV. · The USB jack on the light strip to the LIGHT BELT port. 3. Connect the power adapter to a power source and press the Power button on the backlight box to turn on the lights. CONNECT WITH THE APP 1. Get the app. 2. Register or login to app. CONNECT WITH THE APP continued... 3. Recommended app settings. 4. Turn on Bluetooth and Wi-Fi on your smartphone. Make sure you are connected to a 2.4GHz Wi-Fi access point. Only 2.4G Wi-Fi networks are supported CONNECT WITH THE APP continued... 5. Connecting lights to app. TIP If light not flashing, hold down power button until light blinks rapidly to enter pairing mode. 1 2 1 2 AmbiColour Smart TV Backlight LED Strip AmbiColour Smart TV Backlight LED Strip Connect Smarthome 1 2 AmbiColour Smart TV Backlight LED Strip CONNECT WITH THE APP continued... 6. Using lights with the app. AmbiColour Smart TV Backlight LED Strip AmbiColour Smart TV Backlight LED Strip CONNECT WITH THE APP continued... 7. Removing light strip from the app. AmbiColour Smart TV Backlight LED Strip AmbiColour Smart TV Backlight LED Strip SCROLL DOWN TROUBLESHOOTING THE LIGHT STRIP DOES NOT APPEAR ON THE APP: · If the lights are not blinking rapidly, hold down the power button until the lights flash rapidly to reset it. · Ensure Bluetooth and Wi-Fi are enabled on your smartphone. · Ensure that the Wi-Fi signal is strong at the installation point. · Make sure you are connected to a 2.4GHz Wi-Fi network. Most modems/routers support both 2.4GHz and 5GHz bands and may use the same Wi-Fi network name (SSID) for both bands. Log into the router's settings and check: · Is 2.4GHz band enabled? · If both 2.4GHz and 5GHz bands are using the same SSID, find the settings that allow you to separate the 2.4GHz TROUBLESHOOTING continued... and 5GHz bands. Usually, there will be an option to configure each band individually. Change the SSID for one or both bands to make them distinct. For instance, "NetworkName_2.4GHz" and "NetworkName_5GHz". · If you are using Telstra Smart Modem, refer to the following guide to resolve band steering issues: https://www.laserco.com.au/TelstraNBN-Gen-Smart-Modem-Fix WARNINGS AND CAUTIONS 1. For indoor use only. 2. Ensure back of the TV is free of dust and water before installing. 3. Use the backlight box in a dry and ventilated place, away from damp or humid environments. 4. It is normal for the control box to get hot after a few hours of operations. 5. If not being used for an extended period of time, make sure to unplug the power adapter. 6. This product is not a children's toy. Adult supervision is recommended. SPECIFICATIONS Power adaptor Input: AC 100-240V 50/60Hz Output: DC 24V 2A (max.) Dimensions of the control box L194*W163*H68mm Length of the light strip 6m (suitable for up to 85" TV) Length of the HDMI cable 1m Wi-Fi Standard 802.11 b/g/n Wi-Fi Frequency 2.4GHz HDMI capabilities 3840x2160@60Hz; HDMI2.0; HDCP2.2; CEC Visit our website www.connectsmarthome.com.au Check us out at