Shoebox F Series LED Area Light
Product Overview
The Shoebox Light is an impressive blend of performance, value and aesthetics. It is available in a wide range of lumen packages to meet a variety of outdoor lighting needs, including campus and parking lot applications. The area luminaire can be combined with a complete, architecturally sophisticated LED family to create a total solution for commercial, municipal, retail, education and hospitality applications. The optional visual comfort optic distributes light through a non-pixelated light source that produces uniform, eye-friendly illumination with minimal glare. The high-performance, IP65-rated luminaire delivers a minimum of 140 lumens per watt, resulting in significant energy savings while ensuring long service life in the field.
Image of the Shoe Box F Series LED Area Light fixture.
Close-up view of the Photocell Sensor component.
Close-up view of the Plug-in Motion Sensor component.
Illustration showing the photocell sensor can be replaced by a shorting cap.
Image highlighting the effective heat dissipation design of the luminaire.
Features
- Power adjustable: 100W, 200W, 300W, 5000K
- Motion sensor and daylight sensor available.
- Lumen packages ranging from 14,000lm to 42,000lm.
- Comes with multiple bracket options, 5-year warranty on the entire luminaire.
- 10/20 kV surge suppression standard.
- Available in Type III.
Technical Information
| Model | F1 | F3 | F5 |
|---|---|---|---|
| Wattage (Single) | 100W | 200W | 300W |
| Wattage (Tunable) | 100W | 100W/150W/200W | 150W/200W/300W |
| Light Efficiency | 140 lm/W | ||
| Input Voltage | AC100-277V/AC100-347V | ||
| Power Frequency | 50/60Hz | ||
| Power Efficiency | 94% | ||
| Power Factor | 0.95 | ||
| Heat Radiator | Die-Cast Aluminum | ||
| Beam Angle | T3 | ||
| LED Type | 3030/2835 | ||
| CRI | 70/80 | ||
| CCT (Tunable) | 5000K | ||
| Working Life-span | > 50000 hours | ||
| IP Rating | WET LOCATION AND IP65 | ||
| Surge Protection | 10/20 kV (optional) | ||
| Carton Dimensions (SF Bracket) | 577x282x146mm 22.7x11.1x5.7inch | 625x380x130mm 24.6x15x5.1inch | 890x405x125mm 35x16x5inch |
| Carton Dimensions (AAM Bracket) | 515x282x146mm 20.3x11.1x5.7inch | 645x380x130mm 25.4x15x5.1inch | 890x405x125mm 35x16x5inch |
| Net Weight | 3.6kg/7.9lbs | 5.2kg/11.5lbs | 6.5kg/14.3lbs |
| Gross Weight | 4.8kg/10.6lbs | 6.7kg/14.8lbs | 8.5kg/18.7lbs |
Photometry
Photometry diagram showing light distribution patterns for T3M Type III Medium. One diagram displays isolines representing light intensity levels, while the other is a polar plot indicating light intensity distribution at different angles.
Dimensions
Dimensional drawing of the F1 model, showing overall length of 527.4mm (20.76in), width of 362.1mm (14.26in), and height of 328.9mm (12.95in), with a base width of 84mm (3.31in).
Dimensional drawing of the F3 model, showing overall length of 578.2mm (22.76in), width of 412.8mm (16.25in), and height of 324.5mm (12.8in).
Dimensional drawing of the F5 model, showing overall length of 658.8mm (25.9in).
Illustration of the U-shaped bracket installed on the luminaire, showing its mounting configuration.
Accessories
Image of the Adjusted Arm Mounting Kit.
Image of the Arm Mounting Kit.
Image of the Slip Fitter accessory.
Image of the Trunnion Mounting Kit.
Image of the Bracket accessory.
Installation Guidance
1. Tighten 2 x Fixing screws by spanner, ensure to add star washer to avoid the screws coming loose.
2. Turn on the power to test the shoebox light, but cover the sensor window if there is sunshine.
Arm Mounted: Diagram illustrating the Arm Mounted installation. Step 1 shows tightening 2 fixing screws with a spanner. Step 2 shows drilling holes on a square pole corresponding to the arm's holes, using a bolt and nut plate to fix the fixture tightly, connecting the AC wire, and securing the water-proof gasket and cover plate with screws before powering on.
Slip Mount: Diagram illustrating the Slip Mount installation. Step 1 shows sliding the mount over a pole. Step 2 shows tightening screws. Text explains that slip fitter mounts are easy to install on standard 2 3/8-inch lighting poles and offer the advantage of angling the light inwards with adjustable heads.
Trunnion Mounted: Diagram illustrating the Trunnion Mounted installation. Text describes these mounts as versatile, fitting at the bottom of LED Shoe Box lights, borrowing design from yoke mounts used on flood lights, and being suitable for unique applications.
