User Manual for FUNPOWER models including: 2ABUP-FT1206YG, 2ABUPFT1206YG, FT1206YG Remote Control Transmitter, FT1206YG, Remote Control Transmitter, Control Transmitter, Transmitter
Shenzhen Funpower General Technology Co., Ltd. FT1206YG Remote Control Transmitter 2ABUP-FT1206YG 2ABUPFT1206YG ft1206yg
File Info : application/pdf, 2 Pages, 683.70KB
DocumentDocumentUSER MANUAL FOR FT1206YG REMOTE CONTROL TRANSMITTER
I. Operation Instructions
1 LED Indicator 2 Fan ON/OFF(Pairing Button) 3 Fan Speed Up 4 Fan Speed Down 5 Fan Forward/Reverse 6 Light ON/OFF 7 Color switching 8 BATTERY: 12V/23Ax1 9 Standby
II. Use precautions
1. When press the key of transmitter, the LED indicator doesn't on, please inspect the battery installation. 2. When press the key of transmitter, the LED indicator flashing, that means the battery get low voltage, please
replace a new one. 3. Please pull out of the battery from the transmitter when leaving unused for a long time.
FCC Instructions
This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
--- Reorient or relocate the receiving antenna. --- Increase the separation between the product and receiver. --- Connect the product into an outlet on a circuit different from that to which the receiver is connected. --- Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device m not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause Undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the product.
FCC ID: 2ABUP-FT1206YG
Microsoft: Print To PDF