Extreme Networks
ADVANCE WITH US
6480 Via Del Oro
San Jose, CA 95119
+1 888-257-3000
Service Release Notes for WiNG 7.7.1.4-003R
Note: Service releases are made available to fix specific customer reported issues in a timely manner or known issues resolved in main releases. Service releases are not as extensively tested as main releases. The next maintenance or manufacturing release will incorporate all qualifying and preceding service releases.
This document is an addendum to the release notes for the 7.7.1.0-012R, 7.7.1.1-05R, 7.7.1.2-07R, 7.7.1.3-005R release.
CONTENTS
- New Platforms and FEATURES ...................................................................................................................................................... 2
- Resolved Issues ..................................................................................................................................................................................... 2
- Platforms Supported ................................................................................................................................................................................ 2
- Firmware Upgrade/Downgrade Procedure ......................................................................................................................................... 4
1. NEW PLATFORMS AND FEATURES
New platforms
None
New Feature
Imagotag enhancements to read AP ID from the dongle (with version 3.0.10+) and allow a provision to configure AP ID manually in case of conflict.
2. RESOLVED ISSUES
Following is a list of SPRs/CRs fixed in this release:
| CR/ESR | Description |
|---|---|
| WOS-3820 | Misc. Imagotag AP ID Enhancements |
| WOS-3723 | Corrected NOVA widgets to display accurate number of 2.4GHz or 5GHz or Sensor radios |
| WOS-3925 | Removed incompatible setting in AP410i-1 default profile which may cause radios to disable |
| WOS-3900 | Improved PMF compatibility for roaming clients such as Apple and Android |
| WOS-3906 | Resolved AP310-1 not communicating on network after upgrade to 7.7.1.3 |
| WOS-3910 | Preserved Chinese character SSID config post controller reload |
| WOS-3896 | Added Band 3 support for Israel (-IL) APs: [AP310i / AP310i-1 / AP310e / AP310e-1 / AP410i / AP410i-1 / AP460i] |
3. PLATFORMS SUPPORTED
WING 7.7.1.4 supports the following platforms with the corresponding firmware images:
| AP Platforms | Firmware image |
|---|---|
| AP302W | AP302W-LEAN-7.7.1.4-003R.img (included in all Controller images) |
| AP305C/AP305CX AP305C-1 |
AP3xxC-LEAN-7.7.1.4-003R.img (included in all Controller images) |
| AP410C/AP460C AP460S6C/AP460S12 C AP410C-1 |
AP4xxC-LEAN-7.7.1.4-003R.img (included in all Controller images) |
| AP310/360 | AP3xx-7.7.1.4-003R.img AP3xx-LEAN-7.7.1.4-003R.img (included in all Controller images) |
| AP410/460 | AP4xx-7.7.1.4-003R.img AP4xx-LEAN-7.7.1.4-003R.img (included in all Controller images) |
| AP505/510/560 | AP5xx-7.7.1.4-003R.img AP5xx-LEAN-7.7.1.4-003R.img (included in all Controller images) |
| AP 7522 | AP7522-7.7.1.4-003R.img AP7522-LEAN-7.7.1.4-003R.img (included in all NX controller images) |
| AP 7532 | AP7532-7.7.1.4-003R.img AP7532-LEAN-7.7.1.4-003R.img (included in all NX controller images) |
| AP 7562 | AP7562-7.7.1.4-003R.img AP7562-LEAN-7.7.1.4-003R.img (included in all NX controller images) |
| AP 8533 | AP8533-7.7.1.4-003R.img AP8533-LEAN-7.7.1.4-003R.img (included in all NX controller images) |
| AP 8432 | AP8432-7.7.1.4-003R.img AP8432-LEAN-7.7.1.4-003R.img (included in all NX controller images) |
| AP 7612 | AP7612-7.7.1.4-003R.img AP7612-LEAN-7.7.1.4-003R.img (included in all NX controller images) |
| AP 7632 | AP7632-7.7.1.4-003R.img AP7632-LEAN-7.7.1.4-003R.img (included in all NX controller images) |
| AP 7662 | AP7662-7.7.1.4-003R.img AP7662-LEAN-7.7.1.4-003R.img (included in all NX controller images) |
| Controller Platform | Firmware Image |
|---|---|
| NX 9500/ NX 9510 | NX9500-7.7.1.4-003R.img, NX9500-LEAN-7.7.1.4-003R.img |
| NX 9600 / NX 9610 | NX9600-7.7.1.4-003R.img, NX9600-LEAN-7.7.1.4-003R.img |
| NX 75XX | NX7500-7.7.1.4-003R.img, NX7500-LEAN-7.7.1.4-003R.img |
| NX 5500 | NX5500-7.7.1.4-003R.img, NX5500-LEAN-7.7.1.4-003R.img |
| Virtual Platfrom | Firmware Image |
|---|---|
| VX 9000¹–production iso/img image | VX9000-INSTALL-7.7.1.4-003R.iso, VX9000-7.7.1.4-003R.img, VX9000-LEAN-7.7.1.4-003R.img |
Note:
APXXX-LEAN-7.7.1.4-003R.img - built without GUI component. AP lean images are also bundled within controller full image.
NXXXXX-LEAN-7.7.1.4-003R.img – built without AP images.
4. FIRMWARE UPGRADE/DOWNGRADE PROCEDURE
The method described in this section uses the Command Line Interface (CLI) procedures. To log into the CLI, either Secure Socket Shell (SSH) ?, Telnet or serial access can be used.
For detailed upgrade procedure, refer to WiNG 7.7.1.0 release notes.
Upgrade from WiNG v7.x.x.x to WiNG v7.1.1.4
- Copy the controller image to your tftp/ftp server.
- Use the
–upgrade ftp://<username>:<password>@<ip address of server>/<name of file>||, or–upgrade tftp://<ip address of server>/<name of file>command from CLI or Switch->Firmware->Update Firmware option from the GUI. - Restart the controller. To restart the controller, use the
<reload>command on the CLI.
Note: You may need to specify the username and password for your ftp server.
