Havit TW925 True Wireless Stereo Earbuds

Product and Accessories

The package includes:

• Earbuds (x2)
• Charging case (x1)
• Charging cable (x1)
• Ear caps (2 pairs: L/S size, M equipped)
• User manual (x1)
• Certificate of quality (x1)

Description of Product Structure

The earbuds and charging case have the following components:

• 1. MFB (Touch panel): The multi-function button on the earbud for controls.
• 2. Indicator light: Shows charging or connection status.
• 3. MIC: Microphone for calls.
• 4. Power LED indicator: On the charging case, indicates charging status.
• 5. Charging port: For connecting the charging cable.

Wearing Method

To wear the earbuds correctly:

Gently insert the earbuds into the cochlea and adjust them to the appropriate angle for a secure fit.

Basic Functions

01 Power On and Bluetooth Connection

Ensure your phone has Bluetooth enabled.

1. Power On:
   • Method 1: Remove the earbuds from the charging case.
   • Method 2: If earbuds are off and outside the case, touch and hold the MFB button for 3 seconds on both sides.

When both earbuds are turned on, their indicators flash white. Once the right earbud indicator flashes white and orange, and the left earbud indicator turns off, the product is ready for pairing.

2. Connect to Device: Turn on Bluetooth on your device and select "HAVIT TW925" from the list of available devices, following your phone's instructions.

Note:

• HAVIT TW925 remembers previously connected devices and will attempt to reconnect automatically when turned on.
• The earbuds will disconnect if they move beyond the Bluetooth working range (10 meters without obstacles). They will automatically reconnect if you return to the range within 3 minutes.
• Pairing mode lasts up to 180 seconds. If pairing is missed, restart the device and follow the procedure again.

02 Power Off

1. Method 1: Place the earbuds into the charging case; they will automatically shut off.
2. Method 2: Touch and hold the MFB for 3 seconds on both earbuds. The white light will flash three times, and the earbuds will turn off.

03 Answering Incoming Calls

Short press the left or right MFB button to answer an incoming call.

04 Ending a Call

Short press the left or right MFB button to end the current call.

05 Declining Incoming Calls

Touch and hold the left or right MFB button for 2 seconds to reject an incoming call.

06 Voice Assistant

Double-tap either the left or right MFB button to activate your device's voice assistant.

Music Playing

Note: Single channel mode requires only one earbud removed from the charging case. If both earbuds are removed before connection, they will operate in bilateral channel mode by default.

1. Play/Pause: Tap the left or right MFB once.
2. Previous Song: Long press the left MFB for 2 seconds.
3. Next Song: Long press the right MFB for 2 seconds.

Switching Between Earbuds:

When playing music, you can switch from one earbud to the other by taking out the second earbud from the charging case. The earbuds will connect automatically. Put the earbud you no longer need into the charging case, and the music playback will continue from the remaining earbud.

Mono Mode

To use a single earbud (unilateral Bluetooth earbud):

Take out either earbud from the charging case. It will automatically turn on and reconnect to previously connected devices.

Clear Pairing List

To clear the pairing list and reset Bluetooth connections:

Take out both earbuds from the charging case and turn them off. Then, touch and hold both MFB buttons for 10 seconds. The earbuds' Bluetooth pairing list will be cleared.

Charging

Case Charging

Charge the charging case using the provided Type-C cable connected to a computer or wall charger. The Power LED indicator on the case flashes white while charging and turns solid white when fully charged.

Earbud Charging

Place the earbuds back into the charging case to charge them. The earbud indicators turn white while charging and turn off once fully charged.

Specifications

• Bluetooth Version: V5.1
• Earbud Battery: 30mAh x 2 (Fully charged in 1.5 hours)
• Charging Case Battery: 300mAh
• Earbud Dimensions: 20 x 15 x 12mm x 2
• Net Weight: 4.0g x 2 (Earbuds) / 20g (Charging case)
• Wireless Working Range: 10M (without obstacles)
• Speaker: 8mm x 2
• Speaker Frequency: 20~20KHz
• Input Voltage / Current: DC 5V / 1A
• Play Time: 3-3.5 hours (at 60% volume)
• Talk Time: 3 hours
• Standby Time: 100 hours
• Charging Time: Approximately 2 hours

Warnings

1. Please follow the instructions for operation.
2. Charge the earbuds with an input power below 5V/1A to protect the battery.
3. Store or use the earbuds in a normal temperature environment.
4. Do not use this product near water. Do not immerse the product in any liquid or splash liquid onto it.
5. Keep the earbuds away from heat sources like radiators, hot air regulators, stoves, or other heat-generating instruments, as they are not high-temperature resistant.
6. Do not block the ports of the earbuds, such as the charger port, LED port, or microphone.
7. To protect your hearing and extend speaker life, it is not recommended to use the maximum volume for extended periods.
8. If the earbuds are damaged for any reason, please contact customer support promptly instead of attempting self-repair. Unauthorized repairs will void the after-sales service.

FCC Caution

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.