Assembly Instruction
Step 1
Attach part A (Curved Pole) to part B (Base Pole) and part P (Base Connector).
Illustration shows part A connected to the base structure formed by parts B and P.
Step 2
Connect part C (Curved Tube) to part A. Insert part D (Screw M8x50mm) through the aligned holes and secure with part M (Washer) and part N (Strap).
Illustration shows part C being attached to part A with a screw, washer, and strap. A magnified view shows the screw insertion.
Step 3
Attach part E (Bolt) and part F (Spring) to the top of part C. Then, attach part H (Chain) to the spring.
Illustration shows parts E, F, and H being connected to the top of part C.
Step 4
Attach part J (Egg Basket) to the base structure. Ensure it is oriented correctly, possibly with a 180-degree rotation indicated in the detail view.
Illustration shows part J being attached to the base. A close-up shows a detail of the attachment mechanism and a 180-degree rotation indicator.
Step 5
Connect part S (Carabiner) to the chain (part H). Then, attach part N (Strap) to the egg basket (part J).
Illustration shows the carabiner connecting to the chain and the strap being attached to the egg basket.
Step 6
The hanging egg chair is now fully assembled and ready for use.
Illustration shows the complete hanging egg chair assembled on its stand.