Heise LED Lighting Systems | Torture Tested Lightbars and More
User Manual for HEISE models including: Projector Series LED Bulb, Projector Series Bulb, LED Bulb, Bulb
Heise LED Lighting Systems | Torture Tested Lightbars and More |
File Info : application/pdf, 2 Pages, 218.06KB
DocumentDocumentPROJECTOR SERIES LED BULB MANUAL Remove factory bulb Install new bulb 1 *Lock mechanism may be different depending on model Apply double sided tape 2 3 Make connection NOTE: Some vehicles may require a Canbus adapter to stop flashing/pulsating of bulbs or a lamp out messages in the instrument cluster. These can be purchased separately at your local Heise retailer. 386.257.2956 · HeiseLED.com PATTERN ADJUSTMENT (1) Set vehicle on a level surface, 10 feet back from a wall or garage door (2) Turn the bulb and watch the pattern on the wall change. 10 ft (3) When the pattern becomes crisp, with a sharp top line and no hot spots in the field stop rotating Visit us online for full installation videos WARNING: THIS LIGHTING PRODUCT IS SOLD FOR OFFROAD USE ONLY. This product should not be used on the road. Keep your original factory bulbs so that you can replace them for use on public roads. Keep the box that the new bulbs came in to store the bulbs and be sure to handle them with care when removing and re-installing.