XDOBO X8 Quick Start Guide

1. Warning

Please note the following:

• There may be noise when playing some songs with strong bass when the battery is low. This is a normal phenomenon. Please ensure that the XDOBO X8 has enough power to maintain performance.
• Prolonged use of the machine at high volume may cause damage to your hearing.
• XDOBO X8 has a built-in lithium battery. Do not use any kind of fast charger exceeding 5V/2A, such as PD fast chargers, mobile phone fast chargers, Qualcomm fast chargers, or gallium nitride fast chargers. The voltage of these chargers cannot be recognized and are not compatible with the motherboard.
• Do not expose to sunlight, fire, or similar overheating environments.

2. What is TWS?

TWS means True Wireless Stereo. This allows two Bluetooth speakers to be paired and play music synchronously.

How to pair your device?

1. Please ensure these two speakers are disconnected from other Bluetooth devices before turning them on. Then, turn on both speakers.
2. Select one of the speakers and double-click to enter TWS pairing mode; the yellow light will flash.
3. After successful pairing, the status yellow light of the main/slave machine will be on.
4. Turn on the Bluetooth of your device (e.g., mobile phone) and find "XDOBO X8" on your device, then select and connect it.
5. Speakers that have been successfully paired with TWS will quickly connect and pair automatically upon subsequent power-on.
6. In TWS mode, EQ can be used.
7. In TWS mode, double-click to disconnect the TWS connection.

3. Key Function

4. Overview

Visual representation of the speaker with labeled buttons and ports:

Top Panel:

• [Power Button] (On/off, TWS pairing)
• [M Button] (EQ mode, Mode switch)
• [Play/Pause/Call Button] (Play/Pause, Answer/End Call, Redial last call)
• [Volume Down/Previous Track Button] (Volume down, Previous track)
• [Volume Up/Next Track Button] (Volume up, Next track)

Ports:

• Type-C Charging Port
• AUX Input

Indicator Lights:

• [Bluetooth Pairing Light] (Blue, flashing)
• [Bluetooth Connected Light] (Blue, solid)
• [EQ Vocal Light] (White, solid)
• [EQ Deep Bass Light] (White, solid)
• [Charging Light] (Red, solid)
• [Full Charge Light] (Red, off)
• [TWS Mode Light] (Yellow, flashing)
• [TWS Connected Light] (Yellow, solid)

5. LED Indication

6. Bluetooth Connection

When the speaker is turned on, the blue light will flash. Find "XDOBO X8" Bluetooth name on your device, select it, and connect.

7. Specifications

• Bluetooth Version: 5.0
• Output Power: 60W
• Frequency Response: 80Hz-18KHz
• Signal-to-noise Ratio: 80±2dB
• Charging Time: About 3 hours
• Input Power: Type-C 5V/2A
• Playing Time: About 8 hours (varies by volume level and audio content)
• Size (L*W*H): 220*95*72(mm)
• Weight: 860g

8. Performance Optimization

• The usage time of the speaker will vary depending on the volume and songs played.
• Playing at maximum volume or with deep bass songs will accelerate battery consumption.
• When the XDOBO X8 is adjusted to the maximum sound, it will protect the speaker components, including the optimization of battery durability and play time. This means that to play longer and reduce battery consumption, the tone balance will be adjusted appropriately, including adjustments to the bass, treble, and vocal parts. Therefore, there is a difference in the level of deep bass between maximum and medium volumes.
• XDOBO recommends adjusting the X8 to a medium volume for listening, as this will maintain the best sound and battery performance.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information: The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions, complying with exposure requirements.