G2 AR Glasses User Manual
Controls
Key:
- Left button: Controls the brightness of the optical machine.
- Right knob key: Press to confirm.
- Key: Press to return.
Powering On
To power on the system, press and hold the button on the box for 6 seconds, then release it. Successful power-on is indicated by the fan starting to turn.
Operation
-
Connect to WiFi
After the light machine powers on, use gestures or head aiming to select the settings icon, as shown in the image. The image displays a screen with various icons including 'Compass', 'CslamShare_LH', 'Space Station', 'Eye Tracking', 'Deep Sea', 'Mask', 'Apriltag', 'XvStream', 'TeamWork', 'Gesture', and 'CreatMesh'. The current IP address is shown as '192.168.22.62'.
Navigate to the settings menu and select 'Wifi settings'.
After opening the WiFi list, select the desired WiFi network. Use the virtual keyboard to enter the password for connection. A successful connection is indicated as shown in the following figure.
-
Enter Application
On the launcher screen, use gestures or head aiming to select any application. Press the knob key to enter the selected application.
FCC Statement
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
