DS-2 Wi-Fi Camera Manual

Connection Instructions

Connect the power interface and the power socket with the power cord.

Installation Guide

1. Choose a location

Please install the camera in a location where the field of view is not blocked, and make sure that the location of the camera has a good Wi-Fi signal.

[Diagram: Illustration showing a camera mounted on a wall, indicating a clear field of view and Wi-Fi signal.]

Voice Broadcast Instructions

Camera Reset

When the camera is powered on, press and hold the reset button for 3-5 seconds until you hear a voice prompt and a prompt sound of "reset is complete, the device will be restarted soon", that is, the reset is successful.

Device Connection

1. Download the APP

Scan the QR code below to download and install the APP.

[QR code for downloading the mobile application is described here but excluded from output.]

2. Register and log in to the APP

1. Please register an APP account and log in.
2. If you have already registered, please log in directly.

3. Add device

Method 1: Open the mobile APP, click the "+" in the upper right corner to scan the QR code on the camera, and complete the device binding according to the guidance of the mobile phone.

Method 2: Open the mobile APP, click the "+" in the upper right corner and select the "QR code not found" button. Select "Wi-Fi camera", and complete the device binding according to the guidance of the mobile phone.

Device Sharing

Open permission of Device sharing. The person being shared can set the functions of the device. If the permission is turned off, they can only watch the video and cannot set functions.

[Screenshots of the mobile app showing device sharing options and QR code sharing.]

Function Settings

The mobile app provides various function settings for the camera:

• Sound
• Intercom
• Full screen
• Night Vision
• PTZ (Pan-Tilt-Zoom) control
• Siren
• Motion Detection
• Activity Zone
• Person tracking
• Red&Blue lights
• Screenshot
• Record
• Human frame
• Live view
• TF-Card status

[Screenshots of the mobile app displaying these function settings.]

Camera Linkage

Linkage Correction

This feature allows for precise alignment between different camera views. Click a position on one camera's screen (e.g., a bullet camera), and the other camera (e.g., a ball camera) will automatically pan to that corresponding position to view details.

To correct the linkage:

1. Click a position on the screen (e.g., the bullet camera view).
2. The ball camera screen will turn to the corresponding position.
3. If there is an error in the corresponding position, use the "Camera Linkage Correction" feature.
4. Align the circled positions of the two pictures to the same reference bit and click the "Confirm" button to complete the correction.

[Diagrams showing the linkage correction process with reference and correction bits.]

FAQ

1. How do I invite family and friends to use my camera together?

Open the APP and select your camera on the home page. Click "Share" in the camera settings to enter the sharing page, where a QR code will be automatically generated. Your friends can open the app and gain access by scanning this QR code on their phone.

2. Why doesn't the Wi-Fi name appear when I connect to Wi-Fi?

On Apple devices with iOS 13 and above, you need to turn on the "Location Permission" for the app in the system settings and change it to "Allow while in use".

3. Will the camera display a red light after turning on the night vision function?

The built-in IR LED lights are used for night vision. When night vision is turned on, the camera may display some faint red lights, but the picture quality remains clear in dark environments.

4. What are the requirements for Wi-Fi?

Please use a 2.4GHz wireless network. The device does not support 5GHz wireless networks. Additionally, set the Wi-Fi authentication method to WPA2-PSK or other lower-level security methods, and ensure a password is set.

5. How far should the camera be from the router?

Testing indicates that Wi-Fi connection distance can normally reach 150 meters in an open area. However, the actual situation depends on Wi-Fi signal strength and environmental factors like thick walls, electromagnetic devices, and large metal objects, which can cause interference. If the camera connection is weak or unstable, place it as close to the router as possible.

6. What should I do if the equipment fails?

Long press the power button to restart the camera. If there is no response, open the USB silicone cover at the bottom of the camera, long press the reset button to reset, and then long press the power button to restart the camera.

7. Can't add a camera for the first time?

Ensure the camera is powered on and the status light is flashing blue slowly, or you hear "Please use the App for WiFi configuration" from the camera.

1. Verify the Wi-Fi account and password are correct.
2. Confirm you are using a 2.4GHz Wi-Fi network, as 5GHz is not supported.
3. Ensure a stable network connection and operate close to the router when adding the camera.
4. If QR code network configuration fails, try AP network configuration (connect your mobile phone to the camera's Wi-Fi hotspot and return to the App). Use a simple password without special characters.
5. If both methods fail, try restarting your router.
6. Provide your router's nameplate label if issues persist.

8. TF card not recognized?

After inserting the TF card, check the "System Settings" -> "TF Card Recording Settings" in the APP. If it shows "No TF card detected", recognition has failed.

1. Use a branded TF card.
2. Ensure the TF card is recognized normally by a computer.
3. Only FAT32 format is supported.
4. Recommended TF card capacity is between 2-128GB.
5. Use a high-speed TF card (Class 4 or above).
6. Try inserting and removing the TF card multiple times.
7. Attempt using a different TF card.
8. Allow some time (approx. 30 seconds) for the camera to recognize the inserted TF card.

Warranty Card

This section contains fields for user information, production date, purchase date, dealer details, and a QC PASS certificate. It also lists the adaptation model as DS2 and other models including DS1, TD35, QC2, MG3, S7, J2, S5, SZ35, TZ35, TL1, TL4, TL3, DS3, TP12, Z7, T3, T4, T6, TS21, TS1.

[Fields for User Name, Address, Telephone, Fax, Post code, E-mail, Product model (Model), Product Number (S/N), Production Date, Purchase Date, Dealer, Distribution unit (seal) are present.]

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Important: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.