Installation Guide for The Home Depot models including: SL-48K006SMTY, 48K006SMTY, KBS-48K006SMTY, KBS-48K006SMTY Indoor Outdoor Wood Gold Ceiling Fan, KBS-48K006SMTY, Indoor Outdoor Wood Gold Ceiling Fan, Outdoor Wood Gold Ceiling Fan, Wood Gold Ceiling Fan, Gold Ceiling Fan, Ceiling Fan
Sofucor 48 in. Indoor/Outdoor Wood Gold Ceiling Fan with LED Light, Remote Control and App SL-48K006SMTY-BGWH - The Home Depot
File Info : application/pdf, 21 Pages, 65.48MB
DocumentDocumentKBS-48K006SMTY
48
Installation Video H KBS-5247
Connecting Smart Systems
16
Warning: Kindly turn off the power when connecting cables.
5 r
FAN ON/OFF
POWE R OFF
Auto off after 2hr
Fan Speed +
Auto off after 4hr
Fan Speed -
Foward/R everset
Light ON/OFF
F ind T he AP P F an Device: If you power on the fan for more than 3 minutes, you will not be able to search for the device. At this time, you need to reset your fan: Turn fan power off and back on at the wall switch, within 30 seconds, press the"P O WE R " b utton for 5 seconds to reset. lf the reset is s uccessful, the light flashes, T hen add the device again.
Warm Light Warm white Light
White Light
(FIG.3)
2.OP E R ATING TR ANSMITTE R : A. Install AAA 2 PCS 1.5volt battery. (To prevent damage to transmitter, remove the battery if not used for a long time). B. S tore the transmitter away from excessive heat or humidity. C. Operating the buttons on the panel of the transmitter
D . K eep pressing the light button i n excess o f 0.7 s econd and it becomes a dimmer.
(F I G . 3)
After the reversible button is pressed, the fan slowly slows down to a stop. And then it started to reverse.
LE AR N
(FIG.4)
3s
Battery: AAA1.5 V 2 PCS
2 . Setting the codes on the receiver: The Learn Key must be pressed with in 5 seconds, after pressing the Power button. If not, please press the P ower button to restart. Keep pressing the button LE ARN key in excess of 3 second it becomes a LE ARN status. The receiver can remember the last codes status . The ceiling fan light flash two times.
(F I G . 4)
3. The receiver Can remember the last codes status
The ceiling fan light flash two times.
16
If you power on the fan for morethan 3 minutes, you will not be able to search for the device.At this time, you need to reset your fan:turn fan power Off and back on at the wall switchwithin 30 seconds,press the "POWER" button for 5 seconds to reset.If the reset is successful,the light flashes, then add the Device again.
17
18
19
Link skill to the Amazon Echo or Google Assistant
Fan and light must be named separately.
Devices
In the App, change the name of the device to an easily identifiable
name such as bedroom light, bedroom fan.
Make sure your Amazon Echo device is powered on and connecting to your home Wi-Fi network.
Common commands
Fan: <DEVICE NAME> Alexa, tum on/off <DEVICE NAME>. Alexa, what is the <DEVICE NAME> speed? Alexa, set the <DEVICE NAME> speed to 1/2/3/4/5/6. Alexa, setthe bedroom <DEVICE NAME> speed to max.
Alexa, turn up/decrease the bedroom <DEVICE NAME> speed Alexa, set the <DEVICE NAME> to foward/reverse.
Alexa, is <DEVICE NAME> on on? Alexa,set the mode on the <DEVICE NAME> to fresh/nature.
Alexa,set the count down on the <DEVICE NAME> to cancel/1 hour/2 hour/4 hour/8 hour.
Light: <device name>
Alexa, tum on/off <device name>. Alexa, set the <device name> to fifty percent.
Alexa, make the <device name> warm white/white/cool white. Alexa, brighten/dim <device name>.