User Manual for SATO models including: PV3, Mobile Printer, Printer
Bluetooth-enabled device from such interrupting devices by a distance of at least 5m. 2-1 The printer has to be within 100m (Outdoors) from AP (Access point) to connect to a Wireless LAN. Althoughup to 35m is possible to communicate indoors, Wireless LAN performance could be affected by the environmental conditions, such as cement walls,
This Wireless LAN manual provides information on the connection of a wireless network with the mobile printer. We at SATO maintain ongoing ...
Wireless LAN Connection Manual. ■ Table of Contents. ... This Wireless LAN manual provides information on the connection of a wireless network with the mobile printer.
File Info : application/pdf, 11 Pages, 1.43MB
DocumentDocumentWireless LAN Connection Manual
BARCODE PRITNER
Rev. 1.00
PV3
Wireless LAN Connection Manual
Table of Contents
1. Manual Information........................................................................................................3
2. Precautions .................................................................................................................... 3
3. How to Connect ............................................................................................................. 4 3-1 Android Soft AP mode (default) .................................................................................. 6 3-2 iOS Soft AP mode (default) ........................................................................................ 7 3-3 How to change infrastructure mode ............................................................................ 8
4. Factory Reset ............................................................................................................... 10
Rev. 1.00
-2-
Wireless LAN Connection Manual
1. Manual Information
This Wireless LAN manual provides information on the connection of a wireless network with the mobile printer. We at SATO maintain ongoing efforts to enhance and upgrade the functions and quality of all our products. The following product specifications and/or user manual content may be changed without prior notice.
2. Precautions
2-1 The printer has to be within 100m (Outdoors) from AP (Access point) to connect to a Wireless LAN. Although up to 35m is possible to communicate indoors, Wireless LAN performance could be affected by the environmental conditions, such as cement walls, and impede signal strength performance. The printer's LCD shows the connection status of the Wireless LAN:
- Indicates that the Wireless LAN is connected normally - Indicates that the Wireless LAN password is wrong - Indicates that the AP of the set SSID is not nearby
2-2 If a device (such as a microwave oven, Wireless LAN, etc.) that uses the same frequency is present, transmission may be interrupted. Separate the printer and Bluetooth-enabled device from such interrupting devices by a distance of at least 5m.
Rev. 1.00
-3-
3. How to Connect
Wireless LAN Connection Manual
Wireless LAN can be configured through the printer's Wireless LAN interface. Likewise, Wireless LAN can also be configured though the printer's Serial/USB interfaces.
(1) Connecting Printer
1) Serial / USB cable Connect Serial/USB cable to Printer, PC device. When Serial cable use, baudrate between Device and printer should be the same.
2) Wireless LAN Connect to the AP (Access Point) configured in Infrastructure mode in order to connect to the LAN/wireless network
A P
Infrastructure mode
In order to configure the network between the wireless host device and the printer, set the printer to Soft AP Mode.
Soft AP mode
Rev. 1.00
-4-
(2) Checking Network Setting Self-test
Power
Wireless LAN Connection Manual
FEED
While the printer is turned off, turn on the printer while pressing the feed button. The printer setting values will then be printed.
Rev. 1.00
-5-
3-1 Android Soft AP mode (default) 1) Select "Wi-Fi".
Wireless LAN Connection Manual
2) Select the printer to connect
3) Select "CONNECT".
4) Wi-Fi communication is available.
Rev. 1.00
-6-
3-2 iOS Soft AP mode (default) 1) Select "Wi-Fi".
Wireless LAN Connection Manual
2) Wi-Fi ON and Select the printer to connect
3) Wi-Fi communication is available
Rev. 1.00
-7-
Wireless LAN Connection Manual
3-3 How to change infrastructure mode 1) Enter the IP address of the printer in the address bar, and the following login window will
pop up. Enter the ID and Password set for the printer, and then click [LOG IN] (Default User Name: admin, Password: password)
2) Select "Wireless" to change Wireless LAN mode.
Rev. 1.00
-8-
Wireless LAN Connection Manual
3) Select "infrastructure", and set SSID, WLAN Security Type. 4) Reboot the Printer.
Rev. 1.00
-9-
Wireless LAN Connection Manual
4. Factory Reset
This function changes the Wireless LAN settings of the printer to the initial factory settings.
Method Select the wireless interface on the printer's LCD screen.
Wireless LAN Factory reset is available in WLAN> ON / OFF> Factory Reset When the printer is turned off, the Wireless LAN setting is applied as the factory default
Factory Reset Values System
Enc / Auth
Network
Printer Name Printer Port Num
User ID User Password
Encryption Network Mode
SSID Inactivity time
IP Assignment Method
IP, Subnet, Gateway
*Printer model 9100 admin password None/Open Soft AP mode PRINTER_{MAC address} 10
Manual (DHCP server)
IP : 192.168.1.1 Subnet : 255.255.255.0 Gateway : 192.168.1.2
Specification Feature
Operation Mode Wireless Standard
Range
Security
Implementation Infrastructure, Soft AP, Ad-hoc, Wi-Fi Direct IEEE 802.11b/g/n, IEEE 802.11a/b/g/n Up to 100m free space (Outdoor) WEP64/128
WPA1/2 PSK
Rev. 1.00
- 10 -
Management
Wireless LAN Connection Manual
WPA 1/2 Enterprise (EAP-TLS, EAP-TTLS, PEAP, LEAP, EAP-FAST) Net Configuration tool, HTTP, Smart connection APP
Rev. 1.00
- 11 -
iTextSharp™ 5.5.13 ©2000-2018 iText Group NV (AGPL-version); modified using iTextSharp™ 5.5.13 ©2000-2018 iText Group NV (AGPL-version)