Documentation | IPGARD
User Guide for Smart-AVI models including: SM-UHO-16P, 16-Port HDMI KVM Switch with USB 2.0 Sharing and OSD
SM-UHO-16P - SmartAVI 16-PORT HDMI KVM Switch
File Info : application/pdf, 2 Pages, 437.16KB
DocumentDocumentTECHNICAL SPECIFICATIONS VIDEO Fornat Input Interface Output Interface Resolution DDC Input Equalization Input Cable Length Output Cable Length USB Signal Type Input Interface Output Interface CONTROL Front Panel RS-232 Hot Keys OSD OTHER Power Dimensions Weight Approvals Operating Temp. Storage Temp. HDMI2.0 (16) HDMI 19-pin (1) HDMI 19-pin Up to 4K (3840 x 2160 @ 30 Hz); Up to 1920 x 1080 @ 60Hz (DVI-D) 5 volts p-p (TTL) Automatic Up to 20 ft Up to 20 ft USB 2.0, 1.1, and 1.0 w/ internal hub (16) USB Type B (2) USB 1.1 Type A for KVM Devices; (2) USB 2.0 Type A Transparent Push Buttons with LED Indicators Via Control @ 115200 bps Via Keyboard Via KM arrow keys External 100-240 VAC/ 12VDC3A @ 24W 17.0" W x 2.7" H x 8.69" D 6.9 lbs UL, CE, ROHS Compliant 32 to +104°F (0 to +40°C) -4 to 140°F (-20 to +60°C) Humidity Emulation Up to 80% (no condensation) Keyboard and Mouse WHAT'S IN THE BOX PART NO. QTY DESCRIPTION SM-UHO-16P 1 SH 16-Port HDMI KVM Switch with USB 2.0 Support and OSD PS12VDC3A 1 12-VDC, 3-A power adapter with center-pin positive polarity. 1 Quick Start Guide NOTICE The information contained in this document is subject to change without notice. iPGARD makes no warranty of any kind with regard to this material, including but not limited to, implied warranties of merchantability and fitness for a particular purpose. iPGARD will not be liable for errors contained herein, or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent from iPGARD, Inc. 20170518 DESIGNED AND MADE IN THE USA Toll Free: (888)-994-7427 Phone: (702) 800-0005 Fax: (702)-441-5590 WWW.iPGARD.COM SM-UHO-16P 16-Port HDMI KVM Switch with USB 2.0 Sharing and OSD Quick Start Guide A full manual can be downloaded from www.ipgard.com/documentation/ SYSTEM CONTROL There are three ways to control the KVM Switch: Keyboard HotKeys, RS-232 Serial Commands, and Front Panel Buttons. The settings for the serial connection are as follows: Baud rate: 115200; Data Bits: 8; Parity: None; Stop Bits: 1; Flow Control: None. The following commands can be used: Command Switch KVM Audio Only KM Only USB Only Learn EDID Trigger Hotplug Restore Factory Defaults Reset Software Get Port Status Hotkey [CT][CT][#]<CR> [CT][CT]a[#]<CR> [CT][CT]c[#]<CR> [CT][CT]u[#]<CR> [CT][CT]e[#]<CR> [CT][CT]h<CR> [CT][CT]f<CR> [CT][CT]r N/A RS-232 //m[#]<CR> //a[#]<CR> //c[#]<CR> //u[#]<CR> //e[#]<CR> //h<CR> //f<CR> //r<CR> //??<CR> Chart Key [CT] = Ctrl <CR> = Carriage Return (Enter Key) [HK] = Current Hot Key Trigger CUSTOM HOTKEY TRIGGERS Users are able to customize the keys that trigger Hotkeys. The following keys are allowed: CT (Left/Right), Alt, Shift (Left/ Right), Caps Lock, Scroll Lock, F1-F12 Change HK Trigger HK + HK + X + desired hotkey View Current HK Trigger Use the RS-232 command: //??<CR> Reset HK Trigger Run "Restore Factory Defaults" command. Default HotKey Trigger CT (Left) HARDWARE INSTALLATION 1. Ensure that power is turned off or disconnected from the unit and the computers. 2. Use HDMI cables to connect the HDMI output ports from each computer to the corresponding HDMI IN ports of the unit. 3. Use a USB cable (Type-A to Type-B) to connect a USB port on each computer to the respective USB ports of the unit. 4. Optionally, connect a stereo audio cable (3.5 mm to 3.5 mm) to connect the audio output of the computer(s) to the audio in ports of the unit. 5. Connect monitor(s) to the HDMI out console ports of the unit using HDMI cable(s). 6. Connect a USB keyboard and mouse in the two USB console ports. 7. Optionally, connect stereo speakers to the audio out port of the unit. 8. Optionally use included 3.5mm to DB9 Cable and connect with a standard RS-232 Cable (not included) to connect to a PC for Serial Control 9. Finally, power on the secure KVM switch by connecting a 12-VDC power supply to the power connector, and then turn on all the computers. Note: You can connect one monitor to the single-head KVM switch. The computer connected to port 1 will always be selected by default after power up. HDMI IN HDMI OUT USB IN USB K/M OUT USB 2.0 OUT OSD Menu Important: when in OSD menu, all keyboard and mouse functionality will be blocked from the computer and only used for the OSD commands. After exiting the OSD menu, all keyboard and mouse functionality will be restored. Keyboard hotkeys for OSD: Command OSD ON/OFF OSD Up OSD Down OSD Left OSD Right OSD Enter OSD Esc Hotkey [CT][CT]o<CR> (UP arrow) (DOWN arrow) (LEFT arrow) (RIGHT arrow) [ENTER] [ESC]