Instruction Manual for ETHAN ALLEN models including: 096011_CLR Jayce Acrylic Table Lamp, 096011_CLR, Jayce Acrylic Table Lamp, Acrylic Table Lamp, Table Lamp, Lamp

Currey China Limited

Assembly Instructions

Jayce Acrylic Table Lamp | Modern Table Lamps | Ethan Allen

Jayce Table Lamp Assembly Instructions 096011 CLR

PDF preview unavailable. Download the PDF instead.

096011 CLR Jayce Table instruct
Jayce Table Lamp Assembly Instructions 096011 CLR
IMPORTANT SAFETY INSTRUCTIONS
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, AND PERSONAL INJURY: This lighting fixture is for indoor use only. This lamp is equipped with a polarized plug. One plug blade is wider than the other. DO NOT MODIFY the plug or power cord in any way. DO NOT EXCEED the recommended bulb wattage. Use only the type of bulb specified. Keep flammable materials away from the bulb. DO NOT OPEN the product or alter the wiring in any manner. If using an extension cord, follow precautions provided with the power cord.

Use care when unpacking. Locate ALL THE PARTS INCLUDED before disposing of packaging materials. Remove the silica gel packet from the socket before plugging the lamp in an outlet.

ASSEMBLY, CARE, AND TROUBLESHOOTING
 No tools required for assembly  Light bulb is not included

Parts Included: (Refer to Figure on the Right) A. Finial B. Shade (may be packed in separate carton) C. Harp D. Socket and Saddle E. Plug Cap
Assembly Procedure: (Refer to Figure on the Right) 1. Install the Harp (C) onto the Saddle (D) 2. Install the Shade (B) onto the Harp (C) 3. Install the Finial (A) onto the Harp (C) 4. Install the bulb onto the Socket (D) 5. Remove the Plug Cap (E)
Caring For and Cleaning Your Lamp: 1. Wipe with a soft, dry cloth. 2. Avoid cleaners, scouring pads, etc., as these may cause
damage to the lamp finish. 3. Before changing the bulb, unplug lamp and allow the bulb to
cool first.

Troubleshooting:

Problem:

Possible cause:

Correction:

Bulb does not light Bulb is burnt or damaged

Replace bulb

Power to lamp is off

Confirm power is on

Lamp is not plugged in Confirm lamp is plugged in

If the fixture still does not work after troubleshooting, please contact your local Ethan Allen Design Center.

©2018 Ethan Allen Global, Inc.

SAVE THESE INSTRUCTIONS

Page 1 of 1


Microsoft Word 2016 www.ilovepdf.com