Instructions for BABY LOCK models including: EMB7-CLF Embellisher Clear Foot, EMB7-CLF, Embellisher Clear Foot, Clear Foot, Foot

Click here for more info on how to use.

Baby Lock Embellisher Clear Foot EMB7-CLF - 1000's of Parts - Pocono Sew & Vac

Baby Lock Serger Accessories

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • References

File Info : application/pdf, 1 Pages, 82.58KB

Baby Lock
Serger Accessories
Clear Cloth Presser Foot for Embellisher
(EMB7-CLF)
Instructions
1. Set needle bar in the full up right position. 2. Raise presser foot lever. 3. Loosen 2.0 mm (allen screw) from cloth presser foot. 4. Remove cloth presser foot from presser bar. 5. Insert new clear presser foot onto the presser bar, all the way up. 6. Make sure the allen screw is facing the flat side of the presser bar,
then tighten screw.
Important: After installing the new cloth presser foot, rotate the handwheel slowly by hand to ensure that the needles are correctly positioned and centered in the cloth presser foot openings. If not, loosen the 2.0 mm allen screw on the cloth presser foot, adjust the position and retighten the screw.

LNIS-EMB7CLF

800-422-2952

www.babylock.com



References