Introduction

Product Diagram

The top of the speaker features ports labeled AUX, TF, and USB, along with a Charging indicator.

The front of the speaker has controls for Volume reduction/previous song, Light mode, Play/Pause, Power On/Off, and Increase volume/Next. It also indicates the Connection mode.

What's in the Box

• 1 Main unit
• 1 User Manual
• 1 Data cable
• 2 Microphones

Specifications

• Bluetooth version: 5.1
• Product size: 260*160*145mm
• Bluetooth transmission distance: 10 meters
• Speaker drivers: 2 full-range speakers, 66mm, 18W each
• Speaker output: 35W
• S/N: ≥75dB
• Charging: DC 15±0.5V/1.2A
• Battery: 7.4V-2200mAh; A18650
• Playtime: 4-8 hours

Transmission distance is tested in open space without interference.

The above data is based on laboratory environment and test results; actual playtime may vary with environment and user habit, for reference only.

Safety Notice

1. Please read and keep this manual for reference.
2. Do not open (or modify in any way) the unit or its AC adapter.
3. Do not attempt to repair the unit, or replace parts within it. Refer all servicing to your retailer or an authorized distributor.
4. Never use or store the unit in an extreme temperature, humid or dusty environment. Please do not expose the unit to rain or chemical materials, and it's dangerous to put it in vibration places. Please make sure it's placed stable before using. Please avoid strong impact.
5. When used by children, please ensure an adult provides supervision until they are familiar with operation methods and safe operation notice.

FCC Requirement

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.