LP&No.1 Vintage Turntable LPSC-008 User Manual

Product Overview

This document provides instructions for the LP&No.1 Vintage Turntable, Model LPSC-008.

Key Components:

• 1. Lift Lever
• 2. Tone-arm
• 3. Speed Control Selection Switch
• 4. AUTO STOP ON/OFF Switch
• 5. Tone Arm Clip/Rest
• 6. Stylus(Needle) Cartridge
• 7. Power Switch (VOLUME CONTROL KNOB)
• 8. Indicator Light
• 9. Function Knob
• 10. Turntable Platter
• 11. 45RPM adaptor
• 12. DC IN Power Jack
• 13. L/R RCA Output Jack

Getting Started

1. Connect the main unit and the speakers with the RCA cable.
2. Firmly and securely insert the DC plug of the adaptor to the DC IN Jack on the back of the unit.
3. Plug the adaptor's AC plugs into a power outlet.

Phono Mode

1. Switch the function knob to PH mode. Turn on the power switch knob. The indicator will become red.
2. Place a record on the turntable platter and select the desired speed (33/45/78) according to the record. For 45RPM records, use the included 45RPM adaptor.
3. Remove the stylus protector. Open the tone-arm clip to release the tone-arm. Push the lift lever backward to raise the tone-arm and gently move the tone-arm to the desired position over the record. The turntable will begin to spin when the arm is moved toward the record. Push the lift lever forward to lower the tone-arm slowly onto the desired position on the record to begin playing. The record will spin only when the tone-arm is moved toward the record if the Auto Stop is turned on.
4. If the Auto Stop Control Switch is turned ON, the record will stop automatically when finished. If Auto Stop Control Switch is turned OFF, the record will not stop automatically when finished.

Remark: AUTO STOP function applies to most 33RPM vinyl records. However, for some vinyl records, it might stop prematurely or not stop at all when AUTO STOP is ON.

Turn the VOLUME CONTROL KNOB to adjust the volume.

Bluetooth Mode

1. Switch the function knob to BT mode. The indicator will become blue with flashing.
2. On your mobile phone or tablet PC, turn on your Bluetooth function and search for the turntable player named "LPSC-008". After pairing and connection, the Bluetooth indicator will become solid blue. You can then play music from your mobile phone or tablet PC on this turntable player.
3. Turn the VOLUME CONTROL KNOB to adjust the volume.

Remark: The volume level of your mobile phone or tablet PC also impacts the overall volume. Adjust it for a satisfying sound.

How to Replace the Turntable Stylus (Needle)

Removing the Stylus from the Cartridge

1. Place a screwdriver at the tip of the stylus and push downward as shown in direction "A".
2. Remove the stylus by pulling the stylus forward and pushing downward.

Installing the Stylus

1. Hold the tip of the stylus and insert the stylus by pressing as shown in direction "B".
2. Push the stylus upward in direction "C" until the stylus locks into the tip position.

TIPS FOR BETTER TURNTABLE PERFORMANCE

1. When opening or closing the turntable cover, handle it gently.
2. Do not touch the needle tip with your fingers; avoid bumping the needle against the turntable platter or record edge.
3. Frequently clean the needle tip using a soft brush in a "back-to-front" motion only.
4. If you must use a needle cleaning fluid, use it very sparingly.
5. Gently wipe the turntable player housing with a soft cloth. Use only a small amount of mild detergent to clean the turntable player.
6. Never apply harsh chemicals or solvents to any part of the turntable system.