Ruijie Reyee RG-ES200 Series

2.5G Cloud Managed PoE Switch, 1 x 10G Uplink

Highlights

Highlight Features

RG-ES206MG-P: 5-Port 2.5 Gigabit Cloud Managed PoE Switch, 1 x SFP+ Uplink. Features include one 10GE SFP+ port and one 10/100/1000/2500BASE-T port, plus four 10/100/1000/2500BASE-T PoE+ ports. The device has LED indicators for System (SYS), PoE, and 2.5G speed modes. Mode 1 displays link status (Green for link up, flashing Green for activity). Mode 2 displays PoE status (Green for PoE supply, flashing Green for PoE overload).

RG-ES209MG-P: 8-Port 2.5 Gigabit Cloud Managed PoE Switch, 1 x SFP+ Uplink. Features include one 10GE SFP+ port and eight 10/100/1000/2500BASE-T PoE+ ports. The device has LED indicators for System (SYS), PoE, and 2.5G speed modes. Mode 1 displays link status (Green for link up, flashing Green for activity). Mode 2 displays PoE status (Green for PoE supply, flashing Green for PoE overload).

Illustration showing a Ruijie Reyee Wi-Fi 7 Access Point connected via 2.5G Ethernet to a Ruijie Reyee switch, demonstrating the capability to unleash the full power of Wi-Fi 7. Another image shows a close-up of a 2500 Mbps connection on a Ruijie Reyee switch.

Network diagram illustrating a typical deployment: RG-ES206MG-P and RG-ES209MG-P switches connected to a Ruijie RG-EG710XS gateway, and Ruijie RG-RAP72 series Wi-Fi 7 Access Points, along with a NAS. This setup highlights breaking network limits and unleashing Wi-Fi 7 performance.

Visual explanation of "Why Not 2.5Gbps on Every Port?" with benefits: higher internal network throughput for smoother performance during peak hours, experiencing wireless performance without limits, and making every gig count without bandwidth left behind.

Screenshot of the Ruijie Cloud mobile application interface, showcasing "Cloud, Make Your Business Easy" for SMB projects. Key management features visible include PoE Reboot, DHCP Snooping, VLAN Configuration, and Loop Prevention.

Specifications

CategorySpecificationModels
RG-ES206MG-PRG-ES209MG-P
Product InformationProduct categoryLayer 2Layer 2
Hardware SpecificationsWarranty3 years3 years
Total number of RJ45 ports58
Total number of optical ports11
Number of 10GE SFP+ ports11
Port SpecificationsNumber of 10/100/1000/2500BASE-T ports58
Reset button11
Interface SpecificationsDIP switchLED mode switch toggled to left (Mode 1): The port LED status indicates the status of traffic transmission. Solid green means that the port is link up, while blinking green means that the port is transmitting and receiving data. LED mode switch toggled to right (Mode 2): The port LED status indicates the PoE status. Solid green means that the port is supplying power, while blinking green means that the port is in power overload state.LED mode switch toggled to left (Mode 1): The port LED status indicates the status of traffic transmission. Solid green means that the port is link up, while blinking green means that the port is transmitting and receiving data. LED mode switch toggled to right (Mode 2): The port LED status indicates the PoE status. Solid green means that the port is supplying power, while blinking green means that the port is in power overload state.
PoE standardPoE/PoE+ (IEEE 802.3af/at)PoE/PoE+ (IEEE 802.3af/at)
Power Supply and ConsumptionNumber of PoE Out ports48
Number of PoE/PoE+ Out ports48
PoE budget70 W130 W
PoE power pins1-2 (+), 3-6 (-)1-2 (+), 3-6 (-)
Power InputDC adapter: Rated input voltage: 100 V AC to 240 V AC, 50 Hz to 60 Hz; Maximum input voltage: 90 V AC to 264 V AC, 47 Hz to 63 Hz; Rated input current: 1.5 A. Output: Rated output voltage: 54 V DC; Maximum output current: 1.48 A.DC adapter: Rated input voltage: 100 V AC to 240 V AC, 50 Hz to 60 Hz; Maximum input voltage: 90 V AC to 264 V AC, 47 Hz to 63 Hz; Rated input current: 2.5 A. Output: Rated output voltage: 54 V DC; Maximum output current: 2.78 A.
Maximum power consumption5.5 W (with no PoE load)
75.5 W (with PoE full load)
8.5 W (with no PoE load)
138.5 W (with PoE full load)
Power supplyDC power adapterDC power adapter
System SpecificationsCPUMAC chip, single-core processor, 62.5 MHz clock frequencyMAC chip, single-core processor, 62.5 MHz clock frequency
Flash memory4 MB4 MB
Forwarding rate33.75 Mpps45 Mpps
Switching capacity45 Gbps (bit/s)60 Gbps (bit/s)
Dimensions and WeightCasingMetalMetal
Product dimensions (W x D x H)172 mm x 90.8 mm x 28 mm (6.77 in. x 3.57 in. x 1.1 in.)202 mm x 108 mm x 28 mm (7.95 in. x 4.25 in. x 1.1 in.)
Weight0.49 kg (1.08 lbs) (without packaging materials)
1.39 kg (3.06 lbs) (with packaging materials)
0.66 kg (1.46 lbs) (without packaging materials)
1.63 kg (3.59 lbs) (with packaging materials)
Shipping weight1.39 kg (3.06 lbs)1.63 kg (3.59 lbs)
Environment and ReliabilityFanFanless designFanless design
CoolingNatural coolingNatural cooling
Mounting optionsWall/DeskWall/Desk
Hot swapping of cablesHot swapping supported by the service port and power connectorHot swapping supported by the service port and power connector
MTBF200,000 hours200,000 hours
Operating EnvironmentOperating temperature0°C to 40°C (32°F to 104°F)0°C to 40°C (32°F to 104°F)
Storage temperature-40°C to +70°C (-40°F to +158°F)-40°C to +70°C (-40°F to +158°F)
Operating humidity10% RH to 90% RH (non-condensing)10% RH to 90% RH (non-condensing)
Storage humidity5% RH to 95% RH (non-condensing)5% RH to 95% RH (non-condensing)
Altitude-500 m to +5,000 m (-1,640.42 ft. to +16,404.20 ft.)-500 m to +5,000 m (-1,640.42 ft. to +16,404.20 ft.)
Corrosion classN/AN/A
ESD ProtectionESD protectionAir discharge: 8 kV
Contact discharge: 6 kV
Air discharge: 8 kV
Contact discharge: 6 kV
Surge protectionService port: ±4 kV for common mode
Power connector: ±4 kV for common mode and ±4kV for differential mode
Service port: ±4 kV for common mode
Power connector: ±4 kV for common mode and ±4 kV for differential mode
Certification and Regulatory ComplianceEMCEN 55032
EN 61000-3-2
EN 61000-3-3
EN 55035
EN 300 386
EN 55032
EN 61000-3-2
EN 61000-3-3
EN 55035
EN 300 386
Safety complianceEN 62638-1EN 62638-1
CertificationCECE
Software SpecificationsSystem Performance Capacity (Recommended camera limit)200W H265: 70
400W H265: 35
200W H265: 90
400W H265: 45
Basic Configurations (PoE watchdog)YesYes
Basic Configurations (Online upgrade)YesYes
Interface (Jumbo frame length (MTU))9216 bytes9216 bytes
Interface (EEE)YesYes
Interface (Cable test)YesYes
Ethernet SwitchingMaximum number of VLANs1616
Maximum number of MAC address entries40004000
Interface flow controlYesYes
IEEE 802.1Q VLANYesYes
Port-based VLANYesYes
LLDPNoNo
LLDP-MEDNoNo
Static MAC addressYesYes
Static aggregationYesYes
LACPNoNo
Inbound or outbound rate limiting based on interface trafficYesYes
MulticastIGMPv1 snoopingNoNo
IGMPv2 snoopingNoNo
Basic IGMPv3 snoopingNoNo
Full IGMPv3 snoopingNoNo
IGMP filteringNoNo
IGMPv1, v2, and v3NoNo
ARPNoNo
IP ServiceIPv4 pingNoNo
IPv4 tracerouteNoNo
ICMPv6NoNo
IPv6 pingNoNo
IPv6 tracerouteNoNo
DNS clientYesYes
DHCP clientYesYes
IP RoutingIPv4 static routeNoNo
IPv6 static routeNoNo
OSPFv2NoNo
OSPFv3NoNo
Gateway Features802.1p priority-based traffic classificationNoNo
DSCP priority-based traffic classificationNoNo
MirroringYesYes
Network Management and MonitoringHTTP loginYesYes
HTTPS loginNoNo
SONYesYes
SyslogNoNo
Camera detectionYesYes
eWeb managementYesYes
Ruijie Cloud managementYesYes
Ruijie Reyee App managementYesYes
SNMPv1, v2c, and v3NoNo
AuthenticationRADIUSNoNo
802.1X authenticationNoNo
SecurityPort isolationYesYes
Broadcast storm controlYesYes
Multicast storm controlYesYes
Unknown unicast storm controlYesYes
DHCP snoopingYesYes
Standard ACLNoNo
Extended MAC ACLNoNo
Extended IP ACLNoNo
IPv6 ACLNoNo
ARP anti-spoofingNoNo
CPU Protection PolicyYesYes
Package ContentsDevice11
User Manual11
Warranty Card11

PDF preview unavailable. Download the PDF instead.

ES2 5G Switch DS 1 0 iLovePDF

Related Documents

Preview Ruijie RG-ES200 Series 2.5G Cloud Managed PoE Switches: Datasheet & Specifications
Explore the Ruijie RG-ES200 Series 2.5G Cloud Managed PoE Switches, featuring 1 x 10G Uplink. This datasheet provides detailed specifications, highlight features, and technical information for RG-ES206MG-P and RG-ES209MG-P models.
Preview Ruijie Reyee RG-ES200 Series Switches: Web-based Configuration Guide
A comprehensive guide to configuring Ruijie Reyee RG-ES200 Series Switches using the web-based interface. Covers login, port settings, VLANs, security, PoE, system settings, monitoring, and FAQs.
Preview Ruijie RG-ES210GS-P Network Switch User Manual
Comprehensive user manual for the Ruijie RG-ES210GS-P network switch, detailing installation, setup, and network configuration for efficient connectivity.
Preview Ruijie Reyee RG-NBS5300-8MG2XS-UP Switch Installation Guide
This document provides a comprehensive guide for installing the Ruijie Reyee RG-NBS5300-8MG2XS-UP Switch. It covers product introduction, preparation steps, installation procedures, system commissioning, and troubleshooting tips.
Preview Ruijie Reyee RG-RAP Series Access Points Web-based Configuration Guide
Comprehensive guide for configuring Ruijie Reyee RG-RAP Series Access Points with ReyeeOS. Covers network setup, Wi-Fi optimization, system settings, and troubleshooting for network professionals.
Preview Ruijie Reyee RG-EG Series Routers Web-based Configuration Guide
Comprehensive guide for configuring Ruijie Reyee RG-EG Series Routers with ReyeeOS 1.97, covering network setup, AP management, VPN, and security features.
Preview Ruijie Reyee RG-EST330F-P Wireless Bridge Installation Guide
Comprehensive installation guide for the Ruijie Reyee RG-EST330F-P Wireless Bridge, covering setup, configuration, safety precautions, and troubleshooting.
Preview Ruijie Reyee RG-EST450G Wireless Bridge Installation Guide
Comprehensive installation guide for the Ruijie Reyee RG-EST450G Wireless Bridge, covering setup, configuration, safety, and troubleshooting. Learn how to deploy your wireless bridge efficiently.