JOYOR Electric Scooter User Manual

Contents

1. Safety Instructions for Use
2. List of Main Components and Parameters of Products
   • Main Components (Reference)
   • Parameter Table (Reference)
3. Operation Instruction
   • Fold and Expand
   • Riding Operation
   • How to Charge
4. Product Maintenance
5. After-sales Maintenance

I. Safety Instructions for Use

This product is an electric scooter for adults, is limited to one person, and do not scoot with others at the same time. Minors must use it under the supervision of adults.

• Please wear safety helmets and other protective equipment when riding this product.
• Please do not ride this product in unsafe or illegal places such as motorways.
• Please practice in the open space first, and drive after skillfully controlling.
• Please do not do dangerous actions or ride with one hand while the scooter is driving. Keep your feet on the pedal.
• Do not turn off the power supply while the scooter is driving.
• Please do not try to directly pass through steps with a gap of over 3cm, which may overturn the scooter and cause injury to the driver or damage to the scooter. Steps below 3cm should also be avoided as much as possible.
• In case of rough or uneven road conditions, please slow down or get off the scooter to push.
• Users must adjust the height of the product to the appropriate position to ensure driving safety.
• Do not ride this product on slippery roads with oil or ice on the surface.
• Do not use this product in an environment below -5°C.
• Please do not immerse the product in a depth of more than 3cm of water and put it on hold to avoid damage to the electrical parts of the vehicle due to water inflow.
• Do not ride in bad weather such as rain, snow, and strong winds, so as not to cause unnecessary injuries due to unnecessary factors.
• If you do not use this product for a long time, please charge it at least once within 30 days. The charging port must be kept clean and dry.
• Do not expose this product to the sun for a long time. At the same time, outdoor enclosure should be avoided.
• Please use the charger equipped with JOYOR's scooter. Do not use the charger indiscriminately to avoid safety problems.
• When charging, it is necessary to ensure that someone is on site to manage it.
• Please try to charge in an open place. When the charger temperature is too high, please stop charging.
• Please do not leave it in a severely humid place for a long time.
• Plastic bags are in danger of suffocating babies.

II. List of Main Components and Parameters of Products

a. Main Components (Reference)

The JOYOR electric scooter features the following main components:

• Display
• Brake handle
• Quick-release grip
• Headlamp
• Folded handle
• Folded base
• Rear mud block
• Rear tail lamp
• Rear shock absorber
• Rear wheel
• Front wheel
• Side light
• Motor
• Frame
• Kickstand
• Front disc brake
• Front shock absorber

b. Parameter Table (Reference)

S Series

III. Operation Instruction

a. Fold and Expand

Refer to the diagrams for folding and expanding the scooter:

Folding:

• Step 1: Release the handlebar lock.
• Step 2: Fold the handlebar down.
• Step 3: Secure the folded handlebar.
• Step 4: Fold the main stem.
• Step 5: Lock the folded stem.

Expanding:

• Step 1: Unlock the main stem.
• Step 2: Unfold the main stem.
• Step 3: Secure the main stem.
• Step 4: Unfold the handlebar.
• Step 5: Lock the handlebar.
• Step 6: Ensure all locks are secure before riding.

b. Riding Operation

The scooter display provides information on speed, battery, and riding modes. The controls are located on the handlebar.

Controls and Functions:

Display Information:

• Implementation Mode (e.g., Walk, ECO, Turbo)
• Power gear display
• Speed display (km/h or Mph)
• Bluetooth lighting indicator
• Error code display
• Single and dual drive switching indicator
• Cruise control indicator
• Battery display
• Current value
• Wheel Diameter
• Multi-function display (ODO, Trip, Remain, Max, AVG)

Advanced Settings:

• Power-on Password: After entering the setting menu, press the 'M' button to switch to P1. Press '+' or '-' to adjust the value, and press 'M' to switch positions. Enter '1159' to access system settings. Then press 'M' to switch to P2 and use '+' or '-' to select On or Off. The default password is '1111'. Press 'M' to switch to P3 to change the password.
• Zero Start: In system settings (P1=1159), switch to P8 and use '+' or '-' to select On or Off. The system defaults to non-zero startup. For safety, confirm to start in gear 1. Then press down the acceleration handle while sliding with your feet to start riding.
• Cruise Control: In system settings, switch to P9 and use '+' or '-' to select On or Off. After starting cruise, press the acceleration handle until the cruise icon lights up. Releasing the handle will not stop the assistance. Shifting gears, braking, or pressing the acceleration handle again will exit cruise.

Braking Procedure:

If you encounter obstacles, release the throttle first. Brake with the left handle (rear brake) first, then the right handle (front brake) to stop or decelerate.

c. How to Charge

1. Open the charging hole protection sleeve and insert the charger output connector into the charging hole.
2. Plug the charger input plug into the supply socket (AC110V-220V).
3. The charger indicator light will turn red during charging and green when the battery is fully charged.
4. Charge the battery in a dry and ventilated environment.

IV. Product Maintenance

• Tire: The tires are elastic rubber. When presenting obvious wear or rupture, contact the dealer for replacement. Monthly, check for loose screws and tighten them.
• Brake: The scooter uses front disc and rear drum brakes. Regularly check the thickness of the brake friction plates. Replace if significantly worn to prevent adverse consequences.
• Battery: Charge the battery fully before the first use. If the scooter is not used for a long time, charge it at least once a month. If the power cannot be charged, contact after-sales service. Battery damage due to water inflow or collision is not covered by the warranty.
• Screws: If the scooter is used frequently, check all screws monthly and replace them every six months to prevent issues.
• Lithium Battery Life: The lithium battery has a charging cycle of at least 500 times, typically exceeding 600 times with normal use. If the mileage is only half of the factory mileage when the battery is fully charged, consider replacing the lithium battery.

V. After-sales Maintenance

Please contact your local dealer for after-sales maintenance. The warranty does not cover faults or damages caused by:

• Improper maintenance or repair.
• Using the scooter for dangerous actions or special effects.
• Self-disassembly or use of non-original parts.
• Damage from accidents, collisions, or misuse.
• Incomplete labeling, water inflow, or mismatched parts numbers.
• Damage from riding on abnormal roads.
• Business rental or improper non-franchise use.
• Force majeure events.
• Exposure to prolonged sunlight or rain, causing aging or functional failure.

Contact Information:

• Whatsapp: +86 134 8692 8696
• After sale email: joyoraftersales@gmail.com

If you have any questions, please contact the after-sales department. An answer will be provided within 24 hours (except holidays).