Instruction Manual for Electrolux models including: E7EC1-610P, E7EC1-610W, UltimateTaste700 Espresso Maker, UltimateTaste700, Espresso Maker
3公升極致美味700 半自動義式咖啡機 (奶霜白) E7EC1-610W | 伊萊克斯
3公升極致美味700 半自動義式咖啡機 - E7EC1-610P
File Info : application/pdf, 60 Pages, 37.35MB
DocumentDocumentInstruction Book UltimateTaste700 Espresso Maker E7EC1-610P E7EC1-610W EN INSTRUCTION BOOK CNT With our Swedish heritage and care for homelife, we are passionate about creating effortless, sustainable homelife experiences that matter for you and our common future. We want to make it more inspiring and effortless to eat healthily and sustainably and have set an ambitious goal for ourselves. Read more about our 2030 goals here: Get usage advice, brochures, trouble shooter, service information: Register your product for better service: Buy accessories and consumables for your appliance: When contacting Service, ensure that you have the following data available: - Model number - PNC number - Serial number The information can be found on the rating plate. Contents Safety instructions ............................................ 4 Introduction ........................................................6 Product overview.............................................................. 6 Placement and function overview.............................. 7 Control panel overview .................................................. 8 Pressure gauge and espresso extraction.................. 9 ...................... 10 To prepare and install all parts...................................10 To switch on the product .............................................12 Daily operation................................................ 13 ........................................13 To froth milk......................................................................16 To make latte or cappuccino.......................................17 ......................................................................18 Cleaning and care Espresso machine .. 21 Every time before use....................................................21 Every time after use .......................................................21 Weekly.................................................................................21 Every 23 months ...........................................................22 When needed...................................................................23 ......... 24 Weekly or at least once every two weeks...............24 Every 12 months ...........................................................24 Every 23 months ...........................................................25 Descaling........................................................... 26 Descaling reminder........................................................26 To do a descaling procedure.......................................26 Troubleshooting ............................................. 28 Settings and adjustments ........................... 19 ............................................19 ........19 To customize the espresso cup volumes................19 19 To restore to factory settings......................................20 Storage............................................................... 30 Disposal.............................................................. 30 www.electrolux.com Safety instructions time. · This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. · Children must not play with the appliance. · Cleaning and user maintenance must not be done by children unless they are aged from 8 years and above and supervised. · Keep the appliance and its supply cord out of reach of children aged less than 8 years. · The appliance must only be connected to a power supply whose voltage and frequency · Never use or pick up the appliance if the supply cord is damaged, the housing is damaged · The appliance must only be connected to an earthed socket. If necessary, an extension cable suitable for 10 A can be used. · If the appliance or the supply cord is damaged, it must be replaced by the manufacturer, its · · Always disconnect the appliance from the power supply if it is left unattended and before assembling, disassembling or cleaning. · · Do not operate the appliance at an environment with high temperature, strong magnetic · The appliance and accessories become hot during operation. Use only designated handles and knobs. Allow to cool down before cleaning or storage. · The supply cord must not come into contact with any hot parts of the appliance. · Do not remove the water tank during the brewing process. If you want to add more water, · DANGER! There is a risk of scalding. · Warning: Avoid steam burn. · When the steam function is used, hot water can drip from the brewing head. DANGER! The water is hot, there is a risk of scalding. · When you turn the steam & hot water dial, a shot of hot water comes out. Be careful and open the steam valve slowly. DANGER! The water is hot, there is a risk of scalding. · Do not immerse the appliance in water or any other liquid. www.electrolux.com · · Fill the water tank only with cold fresh water, never with milk or other liquids. · Do not use the appliance if the water tank is empty. · Do not use the appliance without the drip tray or drip grid, unless a higher cup or mug is in use. · Do not use or place the appliance on a hot surface or near a source of heat. · WARNING: Avoid spillage on the connector. · This appliance is intended for domestic use only. The manufacturer cannot accept any liability for possible damage caused by improper or incorrect use. · WARNING: Potential injury can be caused from misuse. · WARNING: Do not place the appliance in a cabinet when in use. · This appliance is not intended to be operated by means of an external timer or separate remote control system. · This appliance is intended to be used in household and similar applications such as: farm houses; by clients in hotels, motels and other residential type environments; bed and breakfast type environments. www.electrolux.com Introduction Product overview A. Removeable bean hopper B. Removeable top burr C. D. 58 mm PRO grinding cradle E. F. G. H. 58 mm PRO brewing head I. Pressure gauge J. Steam & hot water wand K. Steam & hot water dial L. Removeable water tank M. Removeable drip tray with grid N. O. Non-slip feet P. Tool kit Q. Cleaning brush R. Cleaning pin S. Cup warmer T. Accessory tray U. 360 ml milk jug V. 58 mm PRO tamper Placement and function overview www.electrolux.com Control panel overview A. ON/OFF button B. One cup grind button C. Two cup grind button D. Descale light E. Pressure gauge F. One cup espresso button G. Two cup espresso button H. Manual cup espresso/program button I. Steam & hot water light J. Hot water K. OFF L. Steam Pressure gauge and espresso extraction Ideal espresso extraction The ideal brewing pressure is between 6 and 12 on the pressure gauge (B). The top layer, the crema, has a caramel color. Under extraction If the pressure is lower than 6 on the pressure gauge and watery. The reasons can be that are not pressed hard enough with the tamper. Over extraction If the pressure is higher than 12 on the pressure gauge The reasons can be that grounds are pressed at too high force with the tamper. If you use the correct settings and tamper force but the espresso quality remains poor, refer to "Troubleshooting" on page 28. www.electrolux.com Before you use the product to make espresso, it is necessary to clean and install all parts and do the brewing process one time with water only. To prepare and install all parts 1. Remove the product from the packaging and make sure that all packing material is removed. 2. 3. Remove and discard the red plug at the base of the water tank. 5. Clean the top burr and the bean hopper with the cleaning brush. CAUTION: Do not clean the top burr or the bean hopper with water. 6. Hold the top burr at the handle and insert it in the grinder collar. Make sure that the top burr (A) aligns with the surface of the grinder collar (B). 4. and water tank with warm water and a mild detergent: 7. Turn the top burr clockwise to lock it, and lower the handle. 8. Align the DOWN arrow on the bean hopper with the 9. Press the bean hopper carefully down and turn it clockwise to the lock position. 16. lock position. Note: can be some resistance when you turn the handle. 17. Make sure that the steam & hot water dial is in the OFF position. 10. Make sure that the water tank is clean. 11. Fill the water tank with cold pure water and install it. 3.0L Max 2.0L 18. Connect the product to the power supply. 19. Press the ON/OFF button. 1.0L 0.5L Min 20. During the start-up, the buttons (AC) illuminate all buttons (AF) and the steam & hot water light (G) 12. are on with a steady light. 13. 14. brewing head. 15. 21. Press the two cup espresso button. Water runs from 22. Note: air that releases from the product can cause a loud noise. The noise stops after approximately 20 seconds and it is not an indication of an error. www.electrolux.com 23. Turn the steam wand until the nozzle is above the drip tray. To switch on the product 1. Make sure that the steam & hot water dial is in the OFF position. 24. Turn the steam & hot water dial to the hot water water comes out of the nozzle. 2. Connect the product to the power supply. 3. Press the ON/OFF button. 25. Let the water run for 20 seconds. 26. Turn the steam & hot water dial to OFF. 4. During the start-up, the buttons (AC) illuminate the buttons (DF) illuminate and the steam & hot water light (G) is on with a steady light. 27. water and let them become dry before you make 28. When all buttons (AF) and the steam & hot water light (G) are on with a steady light, the product is prepared for operation. Note: minutes of no operation. www.electrolux.com Daily operation 3.0L Max 2.0L 1.0L 0.5L Min 3.0L Max 2.0L 1.0L 0.5L Min Fill the water tank with cold pure water. Make sure that the water level is not above the 3L mark. Install the water tank. Fill freshly roasted coffee beans in the bean hopper and install the lid. Turn the bean hopper clockwise until the marking at the front edge of the coffee grinder is between the 10 and 5 marking on the bean hopper. CAUTION: beans that stay in the bean hopper for a long time can become moist which affects the grinding and the taste. Note: Between the 10 and 5 marking is the suggested starting point for espresso. If adjustments are necessary, 3. Switch on the product. a. Make sure that the steam & hot water dial is in the OFF position. b. Press the ON/OFF button. 4. 5. To warm the cup with hot water, do these steps: a. b. Turn the steam & hot water dial to the hot water to OFF. c. www.electrolux.com 6. 7. press the one cup espresso button. When the water 8. Press the one cup or the two cup grind button. The pressed grounds. Note: To stop the grinding process before it stops automatically, press the grind button again. 9. accessory tray or put the rubber part at the edge edge (A) of the tamper aligns with the edge of the 10. the brewing head and turn the handle right to the center lock position. 11. press the one cup or two cup espresso button. The Note: The default setting for a one cup espresso is 40 ml. The default setting for a two cup espresso is 80 ml. Refer to "To customize the espresso cup volumes" on page 19 for information on how to change the default settings. Note: The actual extraction volume depends on the 12. To make an espresso with manually selected volume, press the manual cup espresso/program button. The until you press the button again. Note: If you do not press the button again, the process stops automatically when the volume is 250 ml. Turn the handle of the portafilter to the left and then lower the portafilter. Remove the used coffee grounds from the filter basket. To switch off the product, press the ON/OFF button. All lights on the control panel go off. Note: minutes of no operation. Make sure that the steam & hot water dial is in the OFF position. Disconnect the power plug. Clean the filter basket and the portafilter. Refer to "Every time after use" on page 21. www.electrolux.com To froth milk 4° 1. Fill the milk jug with refrigerated full milk. Suggested amount of milk is 100 ml for cappuccino and 160 ml for latte. 2. Prepare the steam wand. a. Switch on the product and move the steam wand until it is above the drip tray. b. Turn the steam & hot water dial to the steam Release steam for approximately 5 seconds until no water comes out of the steam wand nozzle. c. Turn the steam & hot water dial to OFF. 3. Put the steam wand in the milk jug. a. Put the nozzle just below the surface of the milk. Hold the milk jug spout against the steam wand in a 12 o'clock position. b. Tilt the milk jug in a 9 o'clock direction until the 4. Turn the steam & hot water dial to the steam frothing starts. 5. Make sure that the steam wand is in a position that makes the milk rotate in one direction from the top to the bottom. 6. As the milk level rises, lower the milk jug to keep the steam nozzle just below the surface of the milk. 7. the steam nozzle half way to the bottom. 8. When the bottom of the milk jug is too hot to touch, turn the steam & hot water dial to OFF. 9. Remove the milk jug from the steam wand and clean the steam wand and nozzle immediately with a damp sponge or cloth. WARNING: Do not let your skin touch the steam wand or nozzle. There is a risk of burn injury. 10. Move the steam wand until it is above the drip tray. Turn the steam & hot water dial to the hot water position and wait 2 seconds to remove milk that has gone into the steam wand. Turn the steam & hot water dial to OFF. To make latte or cappuccino 1. Tap the bottom of the milk jug against the benchtop to release larger air bubbles. 2. Swirl the milk jug to mix the milk and make the texture silky. 3. Pour the milk into the prepared espresso in one steady movement. www.electrolux.com Espresso Espresso is a concentrated, full- stabe layer of crema on top. Select one cup or two cup espresso. Ristretto A ristretto is a half one cup espresso with aftertaste and a thin crema on top. Americano A one cup or two cup espresso with hot water. to keep the crema on top. Con panna A one cup or two cup espresso topped with lightly whipped cream. Add cinnamon powder or chocolate powder on top. Macchiato A one cup or two cup espresso topped with a small amount of cold or frothed milk and a small dollop of milk foam. Flat white A one cup or two cup espresso with 2/3 frothed milk and a thin layer of milk foam on top Latte A one cup or two cup espresso with 3/4 frothed milk and a milk foam on top Cappuccino A one cup or two cup espresso with 1/3 frothed milk and 1/3 milk foam on top. Add chocolate powder on top. Mocha A one cup or two cup espresso mixed with drinking chocolate and with 1/3 frothed milk and 1/3 milk foam on top. Babyccino No espresso, only frothed milk and milk foam on top. Add chocolate powder on top. Settings and adjustments T ee g grounds have the same granularity as salt. For freshly roasted coffee beans the recommended setting is 1 but the type and quality of coffee beans can make adjustments necessary. Turn the bean hopper clockwise or counterclockwise to the wanted setting between 030. A lower number grind. To customize the espresso cup volumes These are the default settings for espresso cups: · One cup espresso: approximately 40 ml. · Two cup espresso: approximately 80 ml. These are the allowed volumes: · One cup espresso: 20125 ml. · Two cup espresso: 20200 ml. Note: The extraction volume depends on the type of 1. Press and hold the one cup or two cup espresso button. After 3 seconds the light on the other 2. When the volume is satisfactory, release the espresso button. There is a beep sound and the new espresso cup volume is saved. adjust again. temperature grounds · grounds. · grounds. Note: increments. 1. Switch on the product. 2. Press and hold the manual cup espresso/program button until there is a beep sound. The light of the ON/OFF button goes off and the lights of the other buttons are on or flash. 1. 2. Press and hold the one cup or two cup grind button. After 3 seconds, the light of the other grind button 3. Set the wanted temperature by pressing the applicable button. The pressed button comes on with a flashing light. 3. release the grind button. There is a beep sound and www.electrolux.com 3. To restore to the default setting for the one cup grind button (A) or the two cup grind button (B), do these steps: a. Press the one cup grind button (A) to set the temperature to 90 °C. b. Press the two cup grind button (B) to set the temperature to 92 °C. c. Press the one cup espresso button (C) to set the temperature to 94 °C. d. Press the two cup espresso button (D) to set the temperature to 96 °C. Note: Higher temperatures increase bitterness and decrease acidity. Lower temperatures decrease bitterness and increase acidity. 4. Press the manual cup espresso button. There is a beep and the product is set to standard operation mode. Note: If you do not press a button, the product automatically goes back to standard operation mode after . To restore to factory settings 1. Press and hold the one cup and two cup grind button at the same time to enter factory default setting mode. Press and hold the grind button (A) or (B) for 3 seconds until the lights of all buttons go off, except for the pressed grind button When there is a beep sound, release the pressed button. All buttons start to flash. Press the ON/OFF button (C). The setting is reset to default and the product is set to standard operation mode. To restore to the default setting for the one cup espresso button (D) or the two cup espresso button (E), do these steps: Press and hold the espresso button (D) or (E) for 3 seconds until the light of all buttons go off, except for the pressed espresso button When there is a beep sound, release the pressed button. All buttons start to flash. Press the ON/OFF button (C). The setting is reset to default and the product is set to standard operation mode. To restore all default settings, do these steps: Press and hold the ON/OFF button (C). The lights of all other buttons go off. When there is a beep sound, release the ON/OFF button. All settings are reset to default and the product is set to standard operation mode. Note: If you do not press a button, the product automatically goes back to standard operation mode after . 2. When there is a beep sound, release the grind buttons. Cleaning and care Espresso machine The espresso making process involves extracting oils a. Remove the drip tray. b. Empty the drip tray. operation of the espresso machine. Running water through the brewing head and steam way to keep your espresso machine clean. Every time before use · Run water through the brewing head. Refer to "To 14. Every time after use 1. After frothing milk, immediately purge the steam wand by turning the dial to hot water for 12 seconds and then clean it with a damp sponge or cloth. Refer to "To froth milk" on page 16. 2. the end of the cleaning brush. c. Clean the drip tray and grid with warm water. 5. Examine the water tank. Clean it with warm water if necessary. Weekly Purge and clean the brewing head 1. Press the one cup espresso button and wait until the 3. warm water. CAUTION: dishwasher safe. 4. surface of the drip tray, it is necessary to empty the drip tray. 2. the silicone seal with the cleaning brush. 3. Clean the shower head with a damp cloth. www.electrolux.com Every 23 months Use descaling solution (refer to Page 27) to clean up the 1. Fill the milk jug with warm water and descaling solution. 7. Turn the steam & hot water dial to the hot water position and let water run through the steam wand for 40 seconds. 8. Turn the steam & hot water dial to OFF. 2. 9. 3. Put the steam wand in the milk jug and put the milk jug on the drip tray. 4. Wait 8 hours. 5. Remove and empty the milk jug. Clean the milk jug until all remaining particles from the descaling solution are removed. 6. Clean the steam wand with a wet sponge or cloth until all remaining particles from the descaling solution are removed. 10. Press the one cup espresso button to let water run 11. basket. When needed 1. supply. 2. Let the product become cool before you clean it. 3. Clean the outer surfaces with a damp cloth. 4. Clean the water tank, the bean hopper, the drip tray and grid regularly. CAUTION: Never use caustic or abrasive cleaners, and never immerse the product in liquid. CAUTION: dishwasher safe. 5. Insert the thicker cleaning pin through the hole in the steam wand nozzle. 6. Turn the steam & hot water dial to the hot water position and let water run through the steam wand for 40 seconds. 7. Turn the steam & hot water dial to OFF. 8. If the blockage continues, remove the steam wand nozzle and clean it with descaling solution (refer to page 27). www.electrolux.com grinder suitable grind size for espresso extraction. 3. beans in an airtight container. grinding. integrated grinder. Weekly or at least once every two weeks 1. cradle and the grind outlet with the cleaning brush. 4. Clean the bean hopper with the cleaning brush. 5. 2. Clean the grinding cradle and the grind outlet with a damp sponge or cloth and then with a dry cloth. Every 12 months If the grinder is used daily, the burrs need to be cleaned to ensure best performance of the integrated grinder. Regular cleaning helps the burrs achieve consistent grinding results, which is especially important when CAUTION: Never use caustic or abrasive cleaners, and never immerse the product in liquid. 1. Make a note of the current grind setting. This is to make sure that you get the same setting after cleaning. 2. Turn the bean hopper fully counterclockwise to unlock it. 6. Install the empty bean hopper and press the one come out, the top burr is empty. Note: When the bean hopper is not installed, the one cannot start. 7. supply. 8. Remove the bean hopper. 9. Lift the handle on the top burr. 10. Turn the top burr counterclockwise and lift it out from the grinder collar. CAUTION: Do not clean the top burr with water. 11. Clean the parts and surfaces in the grind chamber and the grind collar with the cleaning brush. 12. Do not install the top burr, but install the empty bean hopper. 13. Connect the power supply and switch on the product. 14. Press the one cup or two cup grind button. 18. Remove the bean hopper and install the top burr. Make sure that the top burr aligns with the surface of the grinder collar. CAUTION: If the top burr is not installed correctly, the 19. Install the bean hopper. Note: When the bean hopper is not installed, the one cannot start. 20. Turn the bean hopper to the grind setting that you made a note of. Note: After cleaning, the optimum grind satting may to . Every 23 months If the grinder is used daily, the bean hopper needs to be cleaned to ensure best performance. Note: When the bean hopper is not installed, the one cannot start. 1. Clean the inner surfaces of the grinder from below with the cleaning brush. come out when you press a grind button. CAUTION: Do not pour water or any other liquid into the grind chamber. 15. supply. 16. cradle and the grind outlet with the cleaning brush. 2. Clean the burrs, grinder collar, grind chamber and grind outlet. Refer to "Every 12 months" on page 24. 17. Clean the grinding cradle and the grind outlet with a damp sponge or cloth and then with a dry cloth. Descaling After continued use, your espresso machine may develop a build-up of mineral deposits and therefore require occasional descaling. We recommend descaling your espresso machine every 4-6 months, although this period will depend on the hardness of water and frequency of use. Descaling reminder When the product senses that the water consumption is at 15 liters, the descale light comes on. The descale light stays on until the descaling procedure is completed. You can stop the descaling reminder and restart the water consumption monitor by restoring all factory settings. Refer to "To restore to factory settings" on page 20. Note: If the descaling procedure is not fully completed or stopped at any of the steps, it is necessary to restart the procedure from the beginning. To do a descaling procedure 1. Prepare a descaling solution. Refer to "To prepare a descaling solution" on page 27. 2. Fill the water tank with the descaling solution and install the water tank. 3. Put a 1 liter container below the brewing head. Note: If the descaling procedure is not started in 1 minute, the product goes back to standard operation mode. Note: The descaling procedure can be cancelled at any time with the ON/OFF button. However, if the descaling procedure is not fully completed, the descale light will stay on. 8. Turn the steam & hot water dial to the steam position. The ON/OFF button and the steam & hot 9. Wait 2 minutes while the pump operates. Hot noises. Note: If the procedure is not continued within 5 minutes after the pump stops, the product goes back to standard operation mode, except that the steam & hot water light 10. When the product beeps and the ON/OFF button is on with a steady light, turn the steam & hot water dial to OFF. The steam & hot water light comes on with a steady light. Put another 1 liter container below the steam wand. Switch on the product. Press and hold the one cup two cup at the same time. 11. Remove the water tank and clean it fully in warm running water until all remaining descaling solution is removed. 12. Fill the water tank with pure water. 13. Empty and clean the 1 liter containers and put them back below the brewing head and the steam wand. 14. Turn the steam & hot water dial to the hot water position. The ON/OFF button and the steam & hot 7. button and the steam & hot water light are on with a beep sound and then the product is in descaling mode. www.electrolux.com 15. Wait 2 minutes while the pump operates. Hot water Note: If the procedure is not continued within 5 minutes after the pump stops, the product goes back to standard operation mode, except that the steam & hot water light flashes because the dial is in position. 16. and the ON/OFF button is on with a steady light, turn the steam & hot water dial to OFF. The descaling procedure is completed and the product is set to standard operation mode. To prepare a descaling solution · · · A mixture of white vinegar or citric acid and warm water. 1. Prepare the descaling solution in a 1 liter container. 2. For cleaning tablets, do these steps: a. Fill the container with 1 liter of warm water. b. (please follow the instructions of selected cleaning product) 4. For white vinegar or citric acid solution, do these steps. a. Fill the container with 1 liter of warm water. b. Add 1 cleaning tablet and wait until it is fully dissolved (please follow the instructions of selected cleaning product). 3. a. Fill the container with 500 ml of warm water and 500 ml of white vinegar or 1 liter of warm water and 50 g of citric acid. b. Let the solution mix. www.electrolux.com Troubleshooting Problem No lights on the control panel are on. Continuous beep sounds come from the product. There is a ticking sound when the product starts and a hissing sound when the brewing process Cause The power plug is not connected. The steam & hot water dial is not in the OFF position when you switch on the product. The steam or hot water function is used for too long. The pressure control valve is in operation. Solution Connect the power plug to the power supply. Turn the steam & hot water dial to the OFF position. No action is necessary. The one cup grind button and the The bean hopper is not installed. at the same time. If you press a grind button, there are 3 beep sounds. The one cup grind button and the one at a time. If you press a grind button, there are 3 beep sounds. The one cup grind button and the 3 times. If you press a grind button, there are 3 beep sounds. The grinder was used more than 3 minutes within the last 6 minutes. There is blockage in the grinder. The motor stopped because the current is unusually high. grounds come out. There is blockage in the grinder Install the bean hopper. Wait 6 minutes. Clean the grinder. Refer to "Every 23 months" on page 25. If cleaning the grinder was not the solution to the problem, speak to an Electrolux service center. Clean the grinder. Refer to "Every 23 months" on page 25. basket during grinding. incorrect. There are 5 beep sounds and all There is blockage in the grinder. There is blockage in the grinder. The water tank is empty. Clean the grinder. Refer to "Every 23 months" on page 25. Clean the grinder. Refer to "Every 23 months" on page 25. Fill the water tank and wait 1 minute. No espresso comes out of the not smooth. basket because there is too much were pressed too hard with the tamper. grounds. Adjust the grind setting to a coarser grind. Use lighter force with the tamper. too hard with the tamper. grounds. Adjust the grind setting to a coarser grind. Use lighter force with the tamper. Problem Cause Solution installed in the brewing head. There is no crema on top of the espresso grounds. Steam does not come out when you turn the steam & hot water dial to the steam position. The descale light is on. The start-up of the product is not completed. There is blockage in the steam wand. The product senses that the water consumption is at 15 liters and it is necessary to do a descaling procedure. There is water on the benchtop surface where the product is installed. The drip tray is full. There is a leakage from the water tank. There is a leakage from the drip tray. There is a water leakage at the edge Watery espresso leaks from around loose. installed in the brewing head. The silicone seal in the brewing head is damaged. Wait until the steam & hot water light is on with a steady light. Clean the steam wand nozzle. Do a descaling procedure. Refer to "To do a descaling procedure" on page 26. You can also stop the descaling reminder and restart the water consumption monitor by restoring all factory settings. Refer to "To restore to factory settings" on page 20. Empty the drip dray. Install the water tank correctly. If correct installation was not the solution to the problem, speak to an Electrolux service center. Install the drip tray correctly. If correct installation was not the solution to the problem, speak to an Electrolux service center. Let an Electrolux service center replace the silicone seal in the brewing head. www.electrolux.com Storage 1. cleaning pin in the tool kit behind the drip tray. 2. Put the tray on top of the cup warmer. 3. the tray. CAUTION: brewing head when you do not use the product. The silicone seal inside the brewing head can become damaged. Disposal Recycle the materials with the symbol . The packaging materials can be recycled. Please sort individual components by type and dispose them in applicable containers according to local disposal instructions. Recycling environment and human health by recycling your packaging. Do not dispose appliances marked with the symbol with the household waste. Return the product to your local www.electrolux.com www.electrolux.com 33 www.electrolux.com www.electrolux.com www.electrolux.com 3.0L Max 2.0L 1.0L 0.5L Min www.electrolux.com www.electrolux.com 3.0L Max 2.0L 1.0L 0.5L Min 3.0L Max 2.0L 1.0L 0.5L Min www.electrolux.com 4° www.electrolux.com www.electrolux.com www.electrolux.com www.electrolux.com www.electrolux.com www.electrolux.com www.electrolux.com www.electrolux.com www.electrolux.com electrolux.com E7EC1-610P & E7EC1-610W_IFU_TW_3_240809