RF TEST REPORT

Report Details

Report Reference No.: MAX241120010P01-R01RF

FCC ID: 2AF9S-X5S

Compiled by: Cindy Zheng

Supervised by: Haley Wen

Approved by: Vivian Jiang

Date of issue: November 20, 2024

Testing Laboratory

Name: MAX Testing Co.,Ltd.

Address: 1/F, Building B, Xinshidai GR Park, Shiyan Street, Bao'an District, Shenzhen, Guangdong, 518052, People's Republic of China

Applicant Information

Name: Guangzhou Chicken Run Network Technology Co., Ltd.

Address: Room 1001&1003, No. 19, Yard 2, Yuancun West Street, Tianhe District, Guangzhou, China

Test Specification

Specification: FCC 1.1310

Standard: KDB 447498 D01 General RF Exposure Guidance v06

Test Item Description

Description: Game Controller

Trade Mark: GameSir

Manufacturer: Donguan city EQ Electronic Enterprise Limited

Model/Type reference: GameSir-X5s

Listed Models: N/A

Modulation: GFSK, π/4DQPSK, 8DPSK

Frequency: From 2402MHz to 2480MHz

Rating: DC 3.7V From Battery and DC 5V From External circuit

Result: PASS

RF EXPOSURE EVALUATION METHOD

According to FCC 1.1310, the criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency(RF) Radiation as specified in §1.1307(b).

According to KDB 447498 D01 General RF Exposure Guidance v06, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions is not required when the corresponding SAR Test Exclusion Threshold condition(s) are satisfied.

SAR Test Exclusion Thresholds

Thresholds for 100 MHz – 6 GHz and ≤ 50 mm.

The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR.

Note: f(GHz) is the RF channel transmit frequency in GHz. Power and distance are rounded to the nearest mW and mm before calculation. The result is rounded to one decimal place for comparison. The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion.

Maximum Measured Transmitter Power

This section details the measured transmitter power for different operating modes.

The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance,mm)] · [f(GHz)].

The test Result is less than 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR.

Conclusion

No SAR is required.