Astronaut Star Projector User Manual

Attention

The light source of stars and nebulae is strong, so eyes should not look directly at the light source.

The brightness of the stars (laser brightness) is affected by the ambient temperature and time of use. When the ambient temperature is hot or the power-on time is longer, the brightness of the laser will decrease due to the heat of the light source. To restore brightness, turn off the power and allow the device to cool down (heat dissipation typically takes more than 15 minutes), then turn it back on.

The head and body of the astronaut are connected together by magnets, and the direction of the head can be adjusted. Do not stretch the astronaut's head and body forcefully, otherwise the wires may break due to stretching.

[Diagram Description: The manual includes line drawings of an astronaut-shaped device, showing its front, side, and back. The head is depicted as detachable and adjustable, connected to the body.]

Operation Instructions

Host Key Operation

• power ON/OFF: Press and hold for three seconds to start or shut down the machine.
• lights ON/OFF: Tap to toggle lights.
• volume "-": Tap to decrease volume.
• volume "+": Tap to increase volume.

Remote Control Operation

The remote control offers comprehensive functions:

• LED ON/OFF: Controls LED lights.
• POWER ON/OFF: Turns the device on or off.
• Moon Sta ON/OFF: Controls the Moon Star projection.
• RED lights: Toggles red lights.
• GREEN lights: Toggles green lights.
• volume "+": Increases volume.
• Previous: Selects the previous track/setting.
• Next: Selects the next track/setting.
• Temporarily stop: Pauses current operation.
• volume "-": Decreases volume.
• Blue lights: Toggles blue lights.
• White lights: Toggles white lights.
• Self-propelled: Activates self-propelled mode.
• Voice control: Activates voice control mode.
• Hypnotic music: Plays hypnotic music.
• Bluetooth switch: Connects via Bluetooth.
• Star Breathing Rate +: Increases star breathing rate.
• Light brightness +: Increases light brightness.
• Star Breathing Rate -: Decreases star breathing rate.
• Light brightness -: Decreases light brightness.
• Timed for 1 hour: Sets a 1-hour timer.
• Timed for 2 hour: Sets a 2-hour timer.

Operating Steps

1. To start the machine, press and hold the power button for three seconds. To shut down, press and hold for three seconds. Tap to play lullaby, tap to access Bluetooth profile.
2. Tap to close the nebula projection. Tap to close the star projection. Tap to turn off all lights. Tap to turn on all lights.
3. Tap 'Previous' to cycle through options. Long press the volume button to decrease volume.
4. Tap 'Next' to cycle through options. Long press the volume button to increase volume.

Product Specifications

• Material: ABS/PC/PVC
• Product Color: White
• Laser Wavelength: 532nm
• LED Power: < 5W
• Control Mode: Remote control
• Remote Control Range: < 5 meters (Best distance)
• Power Supply: 100 - 240V~50/60Hz 0.4A
• Work Input: 5V-1A
• Product Size: 120*113*228mm
• Applicable Environment: Indoor Home (Better in a dark environment)
• Working Temperature: -10°~45°Celsius

Compliance Marks: FDA, FC, CE, ROHS

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with a minimum 20cm distance between the radiator and your body. Use only the supplied antenna.