Dayton Audio
User Manual for DAYTON AUDIO models including: DTA-1 Class T Digital Audio Amplifier, DTA-1, Class T Digital Audio Amplifier, Digital Audio Amplifier, Audio Amplifier
Specifi cations: Power Output: 12.8 watts RMS x 2 into 4 ohm Total Harmonic Distortion: < 2.90% @ 12.8W Minimum Speaker Impedance: 4 ohm Signal-to-Noise Ratio: 90 dB, A weighted Frequency Response: 20-20,000 Hz Electrical Requirement: 12VDC @ 2A center pin positive Dimensions: 2" (H) x 6" (W) x 3.5" (D) Weight: 0.5 lbs (without batteries) Dayton Audio Last Revised: 3/1/2022
File Info : application/pdf, 4 Pages, 558.25KB
DocumentDocumentCLASS T DIGITAL AUDIO AMPLIFIER Model: DTA-1 User Manual Introduction: Thank you for your purchase of the Dayton Audio DTA-1 Class T Digital Audio Amplifier. Don't let the compact size fool you; the DTA-1 amplifier has the heart of a serious performer. Inside the DTA-1 is a proprietary Class T amplifier circuit, designed to create more efficient and higher quality audio amplification using digital signal processing, reducing power wasted as heat, meaning more music power to your speakers. The resulting soundstage, tonal balance and sound quality--combined with a modest price--makes this pint-sized T-Amp one of the "soundest" audio amplifier investments you can make! The DTA-1 is remarkably affordable, yet still delivers a crisp, vibrant signal that compares to most high-quality linear amplifiers. Perfect for home or at play applications as the unit operates on eight AA batteries for portable use or the included AC adapter can be used to power the DTA-1 for indoor use. Package Contents: (1) Class T Digital Audio Amplifier (1) 12VDC, 2000mA Switching Power Supply with Interchangeable US/EU Power Plugs (1) 3.5 mm Audio Cable (39") Features: · Turn-on & turn-off "pop" suppression · Intelligent short-circuit protection · Intelligent over-temperature protection · Connects to any passive 4/8 speakers · Accepts standard audio line output from any sound system OPERATION Function: 1. Power/Volume Control 2. Power Indicator 3. Speaker Terminals 4. Power Input 5. 3.5 mm Audio Input 6. Battery Compartment (bottom of unit) Operation: 1. Attach an audio device such as MP3 player, PC or CD player to the 3.5 mm audio input. 2. Attach two 4 or 8 ohm speakers to the speaker terminals. Pay attention to speaker polarity; red to red (+) and black to black (-). 3. Install 8 "AA" batteries or connect the 12 VDC power supply. 4. Turn on the amplifier and set to appropriate volume level. 5. Enjoy your Class T Digital Audio Amplifier. 2 Front Rear 3 Specifications: Power Output: 12.8 watts RMS x 2 into 4 ohm Total Harmonic Distortion: < 2.90% @ 12.8W Minimum Speaker Impedance: 4 ohm Signal-to-Noise Ratio: 90 dB, A weighted Frequency Response: 20-20,000 Hz Electrical Requirement: 12VDC @ 2A center pin positive Dimensions: 2" (H) x 6" (W) x 3.5" (D) Weight: 0.5 lbs (without batteries) 5-Year Limited Warranty See daytonaudio.com for details daytonaudio.com tel + 937.743.8248 info@daytonaudio.com 705 Pleasant Valley Dr. Springboro, OH 45066 USA For technical support please contact: support@daytonaudio.com Dayton Audio® Last Revised: 3/1/2022