Motorola HK126 In-Ear Wireless Mono Headset
Quick Start Guide
1. At a glance
Identify the parts of your headset:
- 1. Microphone ?
- 2. LED status indicator ?
- 3. Multi-function button (MFB) ?
- 4. USB-C charging port ?
- 5. Volume up ▲
- 6. Volume down ▼
- 7. Ear hook ?
- 8. Eartip
- 9. Earpiece
2. Charge
Plug the Type C cable into the headset's USB-C charging port and connect to the Type C power source.
Note: Fully charge before use. Any attempt to remove or replace your battery will damage your headset.
3. Connect and go
- Turn on Bluetooth on your device.
- Turn on your headset.
- Follow the voice prompt's instruction.
- Select HK126 from the Bluetooth menu of your device.
4. Fit and comfort
Ensure a comfortable and secure fit:
Ear hook: Shown for left and right ear placement.
[Diagram showing ear hook placement on ear]
Ear tip: For wearing the earpiece.
[Diagram showing eartip being attached and headset worn]
5. Basic operation
Call Management
| To: | Buttons |
|---|---|
| Answer/end a call | MFB (Multi-function button) |
| Reject a call | MFB pressed for 2 seconds |
| Mute/unmute | On a call: Volume down pressed for 2 seconds. Unmute: Volume up pressed for 2 seconds. |
| Change call volume | Volume up/down |
Media Control
| Action | Buttons |
|---|---|
| Last track | Volume down pressed for 2 seconds (when music playing on headset) |
| Next track | Volume up pressed for 2 seconds |
| Play/pause | MFB (Multi-function button) |
| Reset | MFB and volume down pressed for 6 seconds |
3-way call
| Action | Buttons |
|---|---|
| Pick up calls/put calls on hold/switch calls | MFB |
| Reject calls/continue current call | MFB pressed for 2 seconds |
| End current call/resume on hold calls | MFB pressed for 2 seconds |
Note: Some features are phone and network dependent.
Note: Using a mobile device or accessory while driving may cause distraction and may be illegal. Always obey the laws and drive safely.
6. Connect to the second device
Connect your headset with two devices at the same time:
- Before pairing the second device, turn off Bluetooth on the previously paired device. Then pair the second device following the 'Connect and go' section.
- Once paired to the second device, your headset is ready to connect with either or both devices when it is turned on.
7. LED status indicator
| Status | Indicator |
|---|---|
| Power on | Blinks blue once |
| Power off | Blinks red twice |
| Pairing | Blinks red and blue alternately |
| Standby | Blinks blue every 5 seconds |
| Charging | Solid red |
| Fully charged | Solid blue |
| Low battery level | Blinks red every 5 seconds |
8. Warranty and Regulatory Information
This section provides details on the limited warranty and regulatory compliance for Motorola products and accessories.
Limited Warranty
Coverage: Meizhou Guo Wei Electronics Co., Ltd. ("MZGW") warrants Motorola branded products and certified accessories against defects in materials and workmanship under normal consumer usage.
- Consumer Products: 1 year from the date of original purchase by the first consumer purchaser.
- Consumer Accessories: 90 days from the date of original purchase by the first consumer purchaser.
- Repaired or Replaced Items: The balance of the original warranty or 90 days from the date returned to the consumer, whichever is longer.
Exclusions:
The warranty does not cover:
- Normal wear and tear.
- Batteries whose fully charged capacity falls below 80% of their rated capacity or batteries that leak.
- Damage from abuse, misuse, accident, neglect, improper operation/storage, physical damage, contact with liquids, extreme conditions, commercial use, or unauthorized acts.
- Products or accessories not of the Motorola brand or not approved by Motorola.
- Defects or damage resulting from unauthorized service, modification, or use of altered products (e.g., tampered serial numbers).
- Issues related to communication services or signals.
Obtaining Warranty Service:
Visit motorolasound.com/support for instructions. You will need to provide the product, proof of purchase, a description of the problem, and your contact information. Shipping costs are the customer's responsibility.
FCC Notice to Users:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by Motorola may void the user's authority to operate the equipment.
Industry Canada Notice to Users:
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to two conditions: (1) this device may not cause interference and (2) it must accept any interference, including interference that may cause undesired operation of the device. This device complies with ICES-003 requirements for Class B ITE (Information Technology Equipment).
The device has been tested and complies with FCC/IC SAR limits.
Manufactured, distributed or sold by Meizhou Guo Wei Electronics Co. LTD., official licensee for this product. MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. © 2022 Motorola Mobility LLC. All rights reserved.
Printed in China. Version 3 (NA_EN)
