OpenVox MAG2100 Series Analog Gateway
OpenVox Communication Co., Ltd.
Overview
The OpenVox MAG2100 is a multifunctional analog gateway designed for seamless connection between IPPBX, fax machines, analog phones, and operators. The MAG2100 analog gateway supports 48/72/96 FXS interfaces with a modular design, allowing for flexible addition or removal of module boards as needed. It provides RJ21/RJ45 interface modules, 2 Gigabit Ethernet ports, 1 Gigabit SFP port, and 1 Console port. Additionally, it offers excellent capacity for concurrent voice/fax processing, delivering strong performance and high stability, thus providing high-quality communication services for service providers, enterprises, call centers, and residential users in communities.
The MAG2100 Analog Gateways are developed for interconnecting a wide selection of codecs including G.711A/U, G.723.1, G.729A, G.722, G.726, iLBC, OPUS, AMR and AMR-WB. The MAG2100 series uses standard SIP protocol and is compatible with Leading VoIP platforms, IPPBX, and SIP servers, such as Asterisk, Issabel, 3CX, FreeSWITCH, BroadSoft, and VOS VoIP operating platforms.
Key features:
- 48/72/96 FXS ports
- Support SNMP and TR069
- Support IPv4 and IPv6
- 3km Line Length
- Codecs: G.711A/U, G.723.1, G.729A, G.722, G.726, iLBC, OPUS, AMR and AMR-WB
- Support API
- Fully Compatible with leading SIP based VoIP Telephony Systems
- VEX (Advanced Peer To Peer Call)
Physical Interfaces
| Category | Details |
|---|---|
| Capacity | 48/72/96 FXS ports with RJ21 |
| Console | 1 * console RS232 (RJ45) |
| Port Type | RJ45/RJ21 |
| Ethernet Interfaces | 1 * WAN, 10/100/1000Mbps, RJ-45 1 * LAN, 10/100/1000Mbps, RJ-45 1 * 1000Mbps SFP |
Voice & FAX
- Codecs: G.711A/U, G.723.1, G.729A, G.722, G.726, iLBC, OPUS, AMR and AMR-WB
- Comfort Noise Generation (CNG)
- Modem/POS
- Adaptive (Dynamic) Jitter Buffer
- Programmable Gain Control
- DTMF mode: Signal/RFC2833/INBAND
- T.38/Pass-through
- Echo Cancellation (G.168), with up to 128ms
Call Features
- Call Waiting
- Blind Transfer
- Attend Transfer
- Call Forward on Busy
- Call Forward on No Reply
- Unconditional Call Forward
- Warm/Immediately Hotline
- Message Waiting Indicator
- SIP registration to different servers
- Call Hold
- Do-not-disturb
- 3-Way Conference
- Speed Dial
FXS
- Connector: RJ45 & RJ21
- Dial Mode: DTMF and Pulse
- Pulse: 10 and 20 PPS
- Caller ID: DTMF/FSK CLI Presentation
- Max Cable Length: 3 km
- Reversed Polarity Programmable Call Progress Tone
VoIP Protocol
- SIP v2.0 (UDP/TCP), RFC3261
- SDP, RTP(RFC2833), RFC3262, RFC3263, RFC3264, RFC3265, RFC3515, RFC2976, RFC3311
- RTP/RTCP, RFC2198, RFC1889
- IPv4 and IPv6
- Outbound Proxy
- RFC2806 TEL URI
- RFC3581 NAT, rport
- VLAN 802.1P/802.1Q
- RFC4028 Session Timer
- DNS SRV/A Query/NATPR Query
- NAT: STUN, Static/Dynamic NAT
Software Features
- Hunting Group
- Web ACL
- Telnet ACL
- Action URL
- PPPoE
- OpenVPN
- Digitmap
- Routing Rules based Prefixes
- Caller/Called Number Manipulation
- VEX (Advanced Peer To Peer Call)
Maintenance
- SNMP v1/v2/v3
- Auto Provisioning
- Web Configuration
- Backup/Restore
- Firmware Upgrade via Web
- CDR
- TR069
- IPOE
- Syslog (Emerg, alert, critical, error warning, notice, info, debug)
- Ping/Tracert Test
- Network Capture
- NTP/Daylight Saving Time
- IVR local Maintenance
- Cloud-based Management
General Info
| Attribute | Value |
|---|---|
| Product Name | MAG2100 |
| FXS Ports | 48/72/96 |
| Console | 1 * RS232(RJ45) |
| Port Type | RJ45/RJ21 |
| Ethernet port | 2 * 10/100/1000Mbps ports |
| Network Interface | 1 * 1000Mbps SFP |
| Weight(with packaging) | 4.5kg |
| Dimension(with packaging) | 440mm*44.5mm*335mm |
| Maximum power | 120W |
| Universal Power Supply | 100 ~ 240V AC / -48 ~ -60V DC |
| Operation Temperature | 0°C ~ 45°C |
| Redundant Power Supply | Support |
| Operation Humidity Range | 10% ~ 90% NON-CONDENSING |
| Storage Temperature Range | -20°C ~ 70°C |
| Short/Long Haul Ring Load | 2 REN, up to 3km on 24 AWG line |
| Certification | CE & FCC |
