Govee H6110 RGB LED Strip Lights User Manual

At a Glance

This package includes:

• Strip Lights: 2
• Power Adapter: 1
• User Manual: 1
• Service Card: 1

Specifications

Installing Your Strip Lights

Preparation Before Installing

• Unpack the box and check all items listed in the packing list.
• Power on the strip lights and check whether they light up.

Installation Steps

1. Wipe the surface to make sure it's clean and dry.
2. Peel off the protective film on the tape, stick the strip on, and press over it firmly.
3. Reinforce via clips around corners.
4. Peel off the protective film on the control box and stick it on.
5. Power on the strip lights and begin using.

Downloading the Govee Home App

• Download the Govee Home app from the App Store (iOS devices) or Google Play (Android devices).

Note: A smartphone running iOS 9.3 (or above) or Android 4.4 (or above) is needed.

The Govee Home app is available on the App Store and Google Play.

Controlling with the Control Box

Connecting to a Wi-Fi Network

1. Turn on Bluetooth on your mobile phone.
2. Open the Govee Home app and tap the "+" icon in the top right corner.
3. Select "H6110" in the device list.
4. Select a 2.4GHz Wi-Fi to connect or skip the setup.

Controlling Your Strip Lights with Alexa/Google Assistant

Wi-Fi Setting

Make sure the strip is connected to Wi-Fi. If not, please follow the steps below to set up Wi-Fi:

1. Open the app, select the strip light that has been added and tap the settings icon (⚙️) in the top right corner.
2. Tap "Wi-Fi Setting", select an available Wi-Fi network and enter the password.

Note: Only supports 2.4GHz and 802.11 b/g/n Wi-Fi networks.

Works with Alexa/Google Assistant

1. Open the app, select the strip light that has been added and tap the settings icon (⚙️) in the top right corner.
2. Tap "Using guidance" and follow on-screen instructions to complete setup.

Troubleshooting

Adhesive tape is not strong enough.

1. Make sure the installation surface is clean and dry.
2. Firmly press over the strip after sticking.
3. Reinforce the installation via more clips and tape.

Cannot connect to Bluetooth.

1. Do not skip Bluetooth connection in the app.
2. Make sure Bluetooth in your mobile phone has been turned on.
3. It may be caused by incompatibility between the phone system and the app. Please change to another mobile phone and connect again.
4. Re-power on the strip and re-turn on Bluetooth in your phone and try again.
5. Keep the distance between the strip and the phone less than 1m/3.28ft while connecting.
6. Keep obstructions between the strip and the phone as few as possible.

The strip doesn't match the same color / Some lamp beads don't light up.

Please contact Govee support team for return.

Cannot connect to Wi-Fi.

1. Do not skip the Wi-Fi connecting steps in the app.
2. 5GHz network is not supported. Please set the router to 2.4GHz and then reset it.
3. Connect your phone to Wi-Fi and check whether the network works well.
4. Make sure you have entered the correct Wi-Fi name and password.
5. Change your Wi-Fi password to a brief one. 8 numbers and letters are suggested.
6. Connect hotspot in your phone to the strip lights and check whether the router works with the strip lights.

Cannot sync to the music beat.

1. Please keep the control box close to the sound source.
2. Clean out the sound picking hole on the control box.

Cannot connect to Alexa.

1. Pull out every connective part of the strip lights and firmly re-connect them.
2. Re-connect your phone to Wi-Fi.
3. Plug out the adapter port and re-plug it in.

The strip lights don't work.

1. Pull out every connective part of the strip lights and firmly re-connect them.
2. Tap the On/Off button on the control box or app to check whether it is a strip quality issue.

Customer Service

• Warranty: 12-Month Limited Warranty
• Support: Lifetime Technical Support
• Email: support@govee.com
• Official Website: www.govee.com
• Social Media: Find Govee on Facebook, Twitter, Instagram, and YouTube.

Compliance Information

EU Compliance Statement

Shenzhen Intellirocks Tech Co. Ltd. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU. A copy of the EU Declaration of Conformity is available online at www.govee.com.

EU Contact Address: BellaCocool GmbH (E-mail: info@bellacocool.de) EC REP Pettenkoferstraße 18, 10247 Berlin, Germany

Environmentally Friendly Disposal

Old electrical appliances must not be disposed of together with residual waste, but must be disposed of separately. Disposal at communal collecting points via private persons is free. The owner of old appliances is responsible for bringing them to these collecting points or similar collection points. This effort contributes to recycling valuable raw materials and proper treatment of toxic substances.

FCC and ISED Canada Statement

This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help.

FCC and IC Radiation Exposure Statement

This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Important Safety Information

• Non-replaceable light source. Not intended for illumination. Only used for creating ambiance.
• Do not connect the rope light to the supply while it is in the packing or wound onto a reel.
• Do not use the rope light when covered or recessed into a surface.
• Do not open or cut the rope light.