Lawn & Garden Equipment | Innovative Power Tools | WORX
Instruction Manual for WORX models including: WG261E Cordless Hedge Trimmer, Cordless Hedge Trimmer, WG261E Hedge Trimmer, Hedge Trimmer, Trimmer, WG261E, WG261E.X
45 cm cordless hedge trimmer 20V - with battery and charger | WORX
Worx 20V 45cm Cordless Hedge Trimmer WG261E.9 45cm 20V Lithium PowerShare Cordless Hedge Trimmer - Bare - Screwfix
Worx WG261E.1 45cm 20V 1 x 2.0Ah Lithium PowerShare Cordless Hedge Trimmer - Screwfix
File Info : application/pdf, 12 Pages, 2.73MB
DocumentDocumentSAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS Cordless Hedge Trimmer WG261E WG261E.X TABLE OF CONTENTS 1. SAFETY INSTRUCTIONS 2. COMPONENT LIST 3. TECHINCAL DATA 4. OPERATION INSTRUCTIONS e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. 5. MAINTENANCE 3. Personal safety 6. ENVIRONMENTAL PROTECTION a) Stay alert, watch what you are doing and use common sense when operating a 7. DECLARATION OF CONFORMITY power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of 1.SAFETY INSTRUCTIONS GENERAL POWER TOOL SAFETY WARNINGS inattention while operating power tools may result in serious personal injury. b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. hat, or hearing protection used for appropriate conditions will reduce personal injuries. c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key 1. Work area safety a) Keep work area clean and well lit. Cluttered left attached to a rotating part of the power tool 3 may result in personal injury. or dark areas invite accidents. e) Do not overreach. Keep proper footing and b) Do not operate power tools in explosive balance at all times. This enables better control atmospheres, such as in the presence of of the power tool in unexpected situations. flammable liquids, gases or dust. Power tools f) Dress properly. Do not wear loose clothing create sparks which may ignite the dust or fumes. or jewellery. Keep your hair, clothing and c) Keep children and bystanders away while gloves away from moving parts. Loose operating a power tool. Distractions can cause clothes, jewellery or long hair can be caught in you to lose control. moving parts. g) If devices are provided for the connection 2. Electrical safety a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. c) Do not expose power tools to rain or wet conditions. Water entering a power tool will 4. Power tool use and care a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. increase the risk of electric shock. c) Disconnect the plug from the power source d) Do not abuse the cord. Never use the cord and/or the battery pack from the power tool for carrying, pulling or unplugging the before making any adjustments, changing power tool. Keep cord away from heat, accessories, or storing power tools. Such oil, sharp edges or moving parts. Damaged preventive safety measures reduce the risk of or entangled cords increase the risk of electric starting the power tool accidentally. shock. d) Store idle power tools out of the reach Cordless Hedge Trimmer WG261E WG261E.X of children and do not allow persons 2. Carry the hedge trimmer by the handle unfamiliar with the power tool or these with the cutter blade stopped. When instructions to operate the power tool. transporting or storing the hedge trimmer Power tools are dangerous in the hands of always fit the cutting device cover. Proper untrained users. handling of the hedge trimmer will reduce e) Maintain power tools. Check for possible personal injury from the cutter blades. misalignment or binding of moving parts, 3. Hold the power tool by insulated gripping breakage of parts and any other condition surfaces only, because the cutter blade that may affect the power tool's operation. may contact hidden wiring. Cutter blades If damaged, have the power tool repaired contacting a "live" wire may make exposed metal before use. Many accidents are caused by parts of the power tool "live" and could give the poorly maintained power tools. operator an electric shock. f) Keep cutting tools sharp and clean. Properly 4. Check the hedge for foreign objects, e.g. wire fences. maintained cutting tools with sharp cutting edges 5. Use both hands when operating the hedge are less likely to bind and are easier to control. trimmer. Using one hand could cause loss of g) Use the power tool, accessories and control and result in serious personal injury. tool bits etc. in accordance with these 6. Hold the hedge trimmer properly, e.g. with both instructions, taking into account the hands if two handles are provided working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. SAFETY WARNINGS FOR BATTERY PACK 5. Battery tool use and care a) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. b) Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. 4 c) When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. a) Do not dismantle, open or shred cells or battery pack. b) Do not short-circuit a battery pack. Do not store battery packs haphazardly in a box or drawer where they may short-circuit each other or be shortcircuited by conductive materials. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. c) Do not expose battery pack to heat or fire. Avoid storage in direct sunlight. d) Do not subject battery pack to mechanical shock. e) In the event of battery leaking, do not allow the liquid to come into contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice. f) Keep battery pack clean and dry. g) Wipe the battery pack terminals with a clean dry cloth if they become dirty. h) Battery pack needs to be charged before use. Always 6. Service a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. refer to this instruction and use the correct charging procedure. i) Do not maintain battery pack on charge when not in use. j) After extended periods of storage, it may be necessary to charge and discharge the battery pack several times to obtain maximum performance. HEDGE TRIMMER SAFETY WARNINGS k) Recharge only with the charger specified by Worx. Do not use any charger other than that specifically provided for use with the equipment. l) Do not use any battery pack which is not designed 1. Keep all parts of the body away from the cutter blade. Do not remove cut material or hold material to be cut when blades are moving. Make sure the switch is off when clearing jammed material. A moment of inattention while operating the hedge trimmer may result in serious personal injury. for use with the equipment. m) Keep battery pack out of the reach of children. n) Retain the original product literature for future reference. o) Remove the battery from the equipment when not in use. p) Dispose of properly. Cordless Hedge Trimmer WG261E WG261E.X q) Do not mix cells of different manufacture, capacity, size or type within a device. r) Keep the battery away from microwaves and high pressure SYMBOLS To reduce the risk of injury, user must read instruction manual Warning Wear ear protection Wear eye protection Wear dust mask Do not expose to rain Do not burn Batteries may enter water cycle if disposed improperly, which can be hazardous for ecosystem. Do not dispose of waste batteries as unsorted municipal waste. Li-Ion battery. This product has been marked with a symbol relating to `separate collection' for all battery packs and battery pack. It will then be recycled or dismantled in order to reduce the impact on the environment. Battery packs can be hazardous for the environment and for human health since they contain hazardous substances. Li-Ion Keep hands away Remove battery from the socket before carrying out any adjustment, servicing or maintenance. Wear protective gloves. 5 Waste electrical products must not be disposed of with household waste. Please recycle where facilities exist. Check with your local authorities or retailer for recycling advice. RCM marking ABN: Australian Business Number. By this number, business information such as entity type, status, business location etc. can be found at website http://abr.business.gov.au. ABN of Positec Australia Pty Limited is 14 101 682 357 Cordless Hedge Trimmer WG261E WG261E.X 6 54 7 3 21 8 6 9 Cordless Hedge Trimmer WG261E WG261E.X A B1 1 2 2 B2 B3 7 2 1 1 3 C 100% 0% D 1 2 Cordless Hedge Trimmer WG261E WG261E.X E1 E2 F1 F2 8 G Cordless Hedge Trimmer WG261E WG261E.X 2. COMPONENT LIST 1. BATTERY PACK RELEASE BUTTON* 2. BATTERY PACK* 3. REAR HANDLE 4. FRONT HANDLE 5. SAFETY GUARD 6. FRONT SWITCH LEVER (ALL AROUND SWITCH FUNCTION) 7. REAR SWITCH LEVER 8. BLADE 9. BLADE SHEATH *Not all the accessories illustrated or described are included in standard delivery. 3. TECHNICAL DATA Type Designation: WG261E WG261E.X (230269- designation of machinery, representative of cordless hedge trimmer) Power No load speed Max. cutting length Cutting diameter Machine Weight(bare tool) WG261E WG261E.X** 20V Max*** Lithium 2200/min 45cm 16mm 2.0 kg ** X=1-999, A-Z, M1-M9 there are only used for different customers, there are no safe relevant changes between these models. *** Voltage measured without workload. Initial battery voltage reaches maximum of 20 volts. Nominal voltage is 18 volts. SUGGESTED BATTERIES AND CHARGERS Category Type WA3551 Capacity 2.0Ah 20V Battery WA3551.1 WA3550 2.0Ah 1.5 Ah 20V Charger WA3550.1 WA3760 WA3880 1.5 Ah 0.4A 2A We recommend that you purchase your accessories from the same store that sold you the tool. Choose the type according to the work you intend to undertake. Refer to the accessory packaging for further details. Store personnel can assist you and offer advice. NOISE INFORMATION A weighted sound pressure A weighted sound power Wear ear protection LpA: 69.6dB(A) KpA= 3 dB(A) LwA: 82.45dB(A) 9 KwA= 3 dB(A) VIBRATION INFORMATION Vibration total values (triax vector sum) determined according to EN 60745: Vibration emission value: ah = 2.2m/s2 Uncertainty K = 1.5m/s² The declared vibration total value may be used for comparing one tool with another, and may also be used in a preliminary assessment of exposure. WARNING: The vibration emission value during actual use of the power tool can differ from the declared value depending on the ways in which the tool is used dependant on the following examples and other variations on how the tool is used: How the tool is used and the materials being cut or drilled. The tool being in good condition and well maintained The use the correct accessory for the tool and ensuring it is sharp and in good condition. The tightness of the grip on the handles and if any anti vibration accessories are used. And the tool is being used as intended by its design Cordless Hedge Trimmer WG261E WG261E.X and these instructions. This tool may cause hand-arm vibration syndrome if its use is not adequately managed. WARNING: To be accurate, an estimation of exposure level in the actual conditions of use should also take account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle but not actually doing the job. This may significantly reduce the exposure level over the total working period. Helping to minimise your vibration exposure risk. ALWAYS use sharp chisels, drills and blades Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate) If the tool is to be used regularly then invest in anti vibration accessories. Plan your work schedule to spread any high vibration tool use across a number of days. 4. OPERATING INSTRUCTIONS NOTE: Before using the tool, read the instruction book carefully. Intended use The machine is intended for cutting and trimming hedges and bushes in domestic use. 10 WARNING! Do not use the product without attaching the guard and front handle. ASSEMBLY & OPERATION ACTION ASSEMBLY Assembling the safe guard Assembling the Front Handle NOTE: Loosen the long screw first before assembling the front handle. NOTE: If the handle is assembled incorrectly, the tool will not power on. Checking the battery charge condition(Fig. C only applies for the battery pack with battery indicator light) Installing and Removing the battery pack FIGURE See Fig. A See Fig. B1, B2, B3 See Fig. C See Fig. D Charging the battery pack Your battery pack is UNCHARGED, you must charge before use. Charging the battery pack More details can be found in charger's manual. OPERATION Starting and stopping See Fig. E1, E2 Top cutting WARNING: If any parts are missing, damaged or broken, do not operate your hedge trimmer until all damaged parts have been replaced or repaired. Failure to do so could result in serious personal injury. DO NOT USE WITHOUT FRONT HANDLE AND SAFETY GUARD. See Fig. F1 Side cutting See Fig. F2 Lubricating the Cutting Blade NOTE: It is important to use only the recommended standard lubricating oil (WD-40) to avoid damage to the blade. See Fig. G HOW TO USE YOUR HEDGE TRIMMER Note that the front switch lever can be activated on three sides, giving you many choices for a comfortable grip. Before cutting an area, inspect it first and remove any foreign objects that could become thrown or entangled in the blades. Always hold the trimmer with both hands and with the blade away from you before turning it on. When trimming new growth, use a wide sweeping action so that the stems are fed directly into the blade. (See Fig. F1&F2) Allow the cutting blades to reach full speed before cutting. When operating, keep the cutting blades away from people and objects such as walls, large stones, trees, vehicles, etc. If the blade stalls, immediately stop the trimmer. Release the two Switch components (6&7) before attempting to clear jammed debris from the cutting blades. Wear gloves when trimming thorny or prickly growth. Do not attempt to cut stems that are too thick for the cutting blade. TOP CUTTING Use a wide sweeping motion (See Fig. F1). A slight downward tilt of the cutting blades in the direction of motion gives the best cutting results. SIDE CUTTING When trimming the sides of the hedge, begin at the bottom and cut upwards (See Fig. F2), tapering Cordless Hedge Trimmer WG261E WG261E.X the hedge inward at the top. This shape will expose more of the hedge, resulting in a more uniformed growth. 5. MAINTENANCE Remove battery before carrying out any adjustment, servicing or maintenance. There are no user serviceable parts in your power tool. Never use water or chemical cleaners to clean your power tool. Wipe clean with a dry cloth. Always store your power tool in a dry place. Keep the motor ventilation slots clean. Keep all working controls free of dust. 7. DECLARATION OF CONFORMITY We, Positec Germany GmbH Postfach 32 02 16, 50796 Cologne, Germany Declare that the product Description Worx Cordless Li-ion Hedge Trimmer Type WG261E WG261E.X(230-269- designation of machinery, representative of cordless hedge trimmer) Function Trimming hedges and brushes 6. ENVIRONMENTAL PROTECTION Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. Complies with the following Directives: 2006/42/EC, 2014/30/EU, 2011/65/ EU&(EU)2015/863, 2000/14/EC amended by 2005/88/EC 2000/14/EC amended by 2005/88/EC: - Conformity Assessment Procedure as perAnnex V - Measured Sound Power Level 82.45dB(A) - Declared Guaranteed Sound Power Level 86.0dB(A) Positec Australia Pty Ltd 10 Corporate Blvd Bayswater, VIC 3153, Australia Standards conform to EN 60745-1, EN 60745-2-15, EN ISO 3744, EN 55014-1, EN 55014-2 The person authorized to compile the technical file, 11 Name Marcel Filz Address Positec Germany GmbH Postfach 32 02 16, 50796 Cologne, Germany 2022/01/18 Allen Ding Deputy Chief Engineer, Testing & Certification Positec Technology (China) Co., Ltd 18, Dongwang Road, Suzhou Industrial Park, Jiangsu 215123, P. R. China Cordless Hedge Trimmer WG261E WG261E.X DECLARATION OF CONFORMITY We, Positec (UK & Ireland) Ltd., PO Box 6242, Newbury, RG14 9LT, UK On behalf of Positec declare that the product Description Worx Cordless Li-ion Hedge Trimmer Type WG261E WG261E.X(230-269- designation of machinery, representative of cordless hedge trimmer) Function Trimming hedges and brushes Complies with the following regulations: Supply of Machinery (Safety) Regulations 2008 Electromagnetic Compatibility Regulations 2016 The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations Noise Emission in the Environment by Equipment for Use Outdoors Regulations - Conformity Assessment Procedure as per SCHEDULE 8 - Measured Sound Power Level 82.45dB(A) - Declared Guaranteed Sound Power Level 86.0dB(A) Standards conform to 12 BS EN 60745-1, BS EN 60745-2-15, BS EN ISO 3744, BS EN 55014-1, BS EN 55014-2 The person authorized to compile the technical file, Name: Jim Kirkwood Address: Positec (UK & Ireland) Ltd., PO Box 6242, Newbury, RG14 9LT, UK 2022/01/18 Allen Ding Deputy Chief Engineer, Testing & Certification Positec Technology (China) Co., Ltd 18, Dongwang Road, Suzhou Industrial Park, Jiangsu 215123, P. R. China After-sales Service and Application At www.worx.com you can order spare parts or arrange the collection of a product in need of servicing or repair. Tel. Service: 0345 202 9679 E-Mail: customerservices@worxtools.com www.worx.com Copyright © 2022, Positec. All Rights Reserved. AR01415304 Cordless Hedge Trimmer WG261E WG261E.X