NICEDACK MTB MUDGUARD INSTALLATION GUIDE

Warm Tips

Thank you for purchasing our NICEDACK MTB mudguard. NICEDACK is a professional brand in Sports & Outdoors, specialized in design and manufacture of mountain bike fenders for many years. We hope our products can bring every customer a good experience on cycling.

Before using this product, please read the manual carefully. We apologize for any inconvenience caused by printing or translation errors.

If you have any questions when installing this fender on your mountain bike, please do not hesitate to contact our team through the following ways. We look forward to receiving your comments about this product.

Follow us:

• [Facebook]
• [Instagram]
• [YouTube]

Contact: info@nicedack.com | NICEDACK_Team

For more good products, welcome to visit our official website: www.nicedack.com

[CE certified] [RoHS compliant]

Installation Guide

Follow these steps for proper installation:

1. Prepare the mudguard and zip ties.
2. Pass the zip ties through the holes on the mudguard.
3. Place the mudguard into the middle of the fork or bike frame, then adjust it to a suitable position with the correct angle. Lastly, stretch the zip ties and make them tightly secured.
4. Finally, cut the remaining zip ties with scissors.

Reminder: To avoid uneven edges scratching you, please hide the endpoint of the zip ties after cutting.

Diagrams:

• Diagram 1: Shows the shape of the NICEDACK MTB mudguard with multiple mounting holes.
• Diagram 2: Shows a set of black zip ties.
• Diagrams 3-6: Illustrate the installation steps, showing zip ties being threaded, positioned, and secured.

Visual Reference

Where is the mudguard installed? This picture is for your reference.

Illustration of a mountain bike with the mudguard installed on the front fork.