NICER T5 Helmet Bluetooth Headset

Product Introduction

Thank you for choosing the NICER T5 helmet Bluetooth intercom headset, designed for motorcycle riders. It facilitates intercom communication, answering phone calls, listening to music, FM radio, and GPS navigation voice prompts, providing a clear, safe, and comfortable riding experience.

The TNICER T5 features Bluetooth version 5.2, stable system operation, dual intelligent noise cancellation, and low power consumption. It includes 40mm high-quality speakers and an intelligent pickup microphone, supporting intercom for two people via two connected devices. The T5 is a lightweight, energy-saving, and humanized Bluetooth headset.

Product Introduction Diagram

The headset features the following controls:

• Intercom button
• Volume up button
• Multi-function button
• Charging port
• Microphone jack
• Volume down button

Function Description

• Qualcomm version 5.2 Bluetooth chip
• Intelligent DSP audio processing with 12th generation CVC noise reduction and 16K voice bandwidth transmission rate
• 500m 2-way intercom Bluetooth headset
• High pairing speed
• Fast charging
• 3 EQ sound effects
• Music sharing capability
• Voice assistant support
• Automatic answer and last dialed number redial
• Intelligent microphone
• Supports voice communication at speeds up to 120 km/h
• 40mm tuning speaker for a superior sound experience
• IP67 level waterproof rating
• 600mAh battery capacity, offering up to 25 hours of intercom/phone call time
• Supports pairing with other brand headsets

Button Functions and Operations

Power on/off

• Power on: Press and hold the [multi-function button + intercom button] for 3 seconds. A power-on prompt will sound, and the blue light will illuminate.
• Power off: Press and hold the [multi-function button + intercom button] for 3 seconds. A power-off prompt will sound, and the red light will illuminate.
• Reset: In the power-on state, press and hold the [multi-function button + volume down button + volume up button] for 5 seconds. The reset is complete when the red and blue lights illuminate simultaneously.

Answering Function

• Answer incoming calls: Short press the [Multi-function button] to answer an incoming call.
• Automatic answer: In standby mode, long press the [multi-function button + volume down button] for 2 seconds to enable auto-answer.
• Reject: Press and hold the [multi-function button] for 2 seconds to reject an incoming call.
• End call: During a call, short press the [multi-function button] to end the call.
• Last redial: In standby mode, quickly double-click the [multi-function button] to redial the last number.
• Cancel auto-answer: To disable the auto-answer function, long press the [multi-function button + volume down button] for 3 seconds.

Music Control

1. Play/Pause: In an active Bluetooth connection, short press the [multi-function button] to play music, and short press it again to pause.
2. Next song: Long press the [volume up button] for 2 seconds to play the next song.
3. Previous song: Long press the [volume down button] for 2 seconds to return to the previous song.

Volume Adjustment

Short press the [volume up button] to increase the volume, and short press the [volume down button] to decrease it.

EQ Sound

To switch EQ sound effects while music is playing, short press the [volume up button] twice. Each double press cycles through different sound effects, announced by voice prompts (e.g., DJ music, popular music, pure vocals).

Music Sharing

Turn on sharing:

For music sharing between two devices (A and B), the device initiating the intercom (e.g., device A) must share to the other (e.g., device B). Follow these steps:

1. Device A connects to the cell phone's Bluetooth (ensure music is playing and paused).
2. Pair device A and device B (ensure they are in non-intercom state).
3. After successful pairing, press and hold the [intercom button + volume up button] on device A for 3 seconds to initiate music sharing.

Turn off sharing:

While music is being shared, press and hold the [intercom button + volume up button] on device A for 3 seconds to stop sharing.

The initiating headset (A) can pause or start music sharing by short pressing the [multi-function button].

Pairing Operation

Bluetooth pairing with cell phone

1. Turn on Bluetooth: In the power-on state, press and hold the [multi-function button] for 5 seconds until the red and blue lights flash alternately, indicating the device is in Bluetooth pairing mode. If previously connected to other phones, the blue light will flash slowly; reset and turn on the device again.
2. Search cell phone Bluetooth: With the red and blue lights flashing alternately, open your cell phone's Bluetooth settings, search for nearby Bluetooth devices, and select "Tnicer-T5" for pairing. A voice prompt "device has been connected" will confirm successful pairing.

Attention:

1. If connected to other phones, the blue light will flash slowly. Reset and turn on the device again.
2. When searching for cell phone Bluetooth, select "Tnicer-T5" for pairing. A "device is connected" voice prompt confirms a successful connection. If the connection fails, clear the Bluetooth memory and search again.

Pairing and intercom between headsets

Active/passive pairing operation for two Bluetooth intercoms (A, B):

1. Turn on both Bluetooth intercoms (A, B). Press and hold the [multi-function button] on intercom B for 3 seconds. The red and blue lights will flash alternately, indicating passive pairing mode.
2. Short press the [intercom button] on intercom A for 3 seconds. The red and blue lights will flash slowly, entering active pairing mode. You will hear a "search" prompt voice when active pairing is active.
3. A voice prompt "device has been connected" indicates successful connection, and the blue light will flash slowly.

Attention:

1. After successful intercom pairing, if a cell phone call is received during an intercom session, the device will automatically cut off intercom and reconnect to the intercom state after the call ends.
2. If disconnection occurs due to distance or environmental factors during intercom, you can manually reconnect by short pressing the [intercom button] once.
3. When the device is in standby mode, short press the [intercom button] to initiate intercom. In an intercom state, short press the [intercom button] to end intercom. Short press the volume up/down buttons to adjust call volume.

Additional Functions

Voice assistant

In standby state, short press [intercom button + volume down button] to activate the voice assistant. The blue light will flash slowly.

Last number redial

In standby mode, short press the [Multi-function button] twice to redial the last number. The blue light will flash quickly.

Reset

In the power-on state, long press [intercom button + volume down button + volume up button] for 5 seconds. The reset is complete when the red and blue lights illuminate.

Battery level reminder

In standby mode, short press [volume up button + volume down button]. The device will announce the battery level. A low battery reminder will also sound when the battery is critically low.

Auto-answer phone call

In the power-on state, press and hold the [multi-function button + volume down button] to enable auto-answer for phone calls.