Xiaomi Pad 5 Quick Start Guide
Device Overview
This section describes the physical layout of the Xiaomi Pad 5.
Front View: Features the display screen showing time (02:48) and date (SAT. 16 AUG.). Top edge has a microphone, speaker, power button, and another speaker. Bottom edge has a speaker, microphone, and a USB Type-C port. The right side includes volume buttons and the Xiaomi Smart Pen charger. The left side has the Xiaomi Keyboard Connector.
Getting Started
Thank you for choosing the Xiaomi Pad 5.
To turn on the device, long-press the power button. Follow the on-screen instructions to configure the device.
For more information, visit the official website: www.mi.com/global/service/userguide
MIUI
The Xiaomi Pad 5 comes pre-installed with MIUI, Xiaomi's customized Android-based OS. MIUI offers frequent updates and user-friendly features based on feedback from over 200 million users worldwide. For more information, visit en.miui.com.
WEEE (Waste Electrical and Electronic Equipment)
Special precautions must be taken to safely dispose of this product. The WEEE symbol indicates that this product may not be discarded with other household waste in the EU.
To prevent harm to the environment or human health from inappropriate waste disposal, and to promote sustainable reuse of material resources, please recycle responsibly. To safely recycle your device, use return and collection systems or contact the retailer where the device was originally purchased.
For the Environmental Declaration, please refer to: www.mi.com/en/about/environment
Important Safety Information
Read all safety information below before using your device:
- Use of unauthorized cables, power adapters, or batteries can cause fire, explosion, or other risks.
- Use only authorized accessories compatible with your device.
- The device's operating temperature range is 0°C to 40°C. Using the device outside this range may cause damage.
- If your device has a built-in battery, do not attempt to replace it yourself to avoid damaging the battery or device.
- Charge the device only with the included or authorized cable and power adapter. Using other adapters may cause fire, electric shock, and damage.
- After charging, disconnect the adapter from the device and power outlet. Do not charge for more than 12 hours.
- Batteries must be recycled or disposed of separately from household waste. Mishandling the battery may cause fire or explosion. Dispose of or recycle the device, battery, and accessories according to local regulations.
- Do not disassemble, hit, crush, or burn the battery. If deformed or damaged, stop using immediately.
- Do not short circuit the battery, as this may cause overheating, burns, or injury.
- Do not place the battery in high-temperature environments; overheating may cause explosion.
- Do not disassemble, hit, or crush the battery, as this may cause leaks, overheating, or explosion.
- Do not burn the battery, as this may cause fire or explosion.
- If the battery appears deformed or damaged, stop using it immediately.
- Users shall not remove or alter the battery. Battery removal or repair must only be done by an authorized repair center.
- Keep your device dry.
- Do not attempt to repair the device yourself. Contact Mi customer support or an authorized repair center if any part malfunctions.
- Connect other devices according to their manuals. Do not connect incompatible devices.
- For AC/DC adapters, the socket-outlet should be installed near the equipment and easily accessible.
Safety Precautions
- Observe all applicable laws and rules restricting tablet use in specific situations and environments.
- Do not use your tablet at petrol stations, in explosive atmospheres, or potentially explosive environments (e.g., fueling areas, below decks on boats, fuel/chemical transfer/storage facilities, or areas with grain, dust, or metal powders). Obey signs to turn off wireless devices. Turn off your tablet in blasting areas or areas requiring radios or electronic devices to be off.
- Do not use your tablet in hospital operating rooms, emergency rooms, or intensive care units. Always comply with hospital rules. If you have a medical device, consult your doctor and the manufacturer to determine if your tablet may interfere. Maintain a minimum distance of 15 cm between your tablet and a pacemaker. Avoid using near hearing aids, cochlear implants, or similar devices.
- Observe aircraft safety regulations and turn off your tablet on board aircraft when required.
- When driving, use your tablet in accordance with traffic laws and regulations.
- To avoid lightning strikes, do not use your tablet outdoors during thunderstorms.
- Do not use your tablet in high humidity places (e.g., bathrooms), as this may result in electric shock, injury, fire, and charger damage.
Security Statement
Please update your tablet's operating system using the built-in software update feature or visit authorized service outlets. Updating through other means may damage the device or result in data loss, security issues, and other risks.
EU Regulations
RED Declaration of Conformity
Xiaomi Communications Co., Ltd. declares that this Tablet with Bluetooth and Wi-Fi 21051182G complies with the essential requirements and other provisions of RE Directive 2014/53/EU. The full EU declaration of conformity is available at: www.mi.com/en/certification
RF Exposure Information (SAR)
This device complies with Specific Absorption Rate (SAR) limits for general population/uncontrolled exposure (Localized 10-gram SAR for trunk, limit: 2.0W/kg) as specified in Council Recommendation 1999/519/EC, ICNIRP Guidelines, and RED (Directive 2014/53/EU).
During SAR testing, the device was set to transmit at its highest certified power level in all tested frequency bands.
When attaching the device near the body, use a belt clip or holster without metallic components. RF exposure compliance was not tested or certified with any accessory containing metal worn on the body, and use of such an accessory should be avoided.
Certification Information (Highest SAR)
SAR 10 g limit: 2.0 W/Kg. SAR Value: Body: 0.350 W/Kg (0 mm distance).
Legal Information
This device may be operated in all EU member states. Observe national and local regulations.
This device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range in Hong Kong and the following countries:
AT | BE | BG | HR | CY | CZ | DK |
EE | FI | FR | DE | EL | HU | IE |
IT | LV | LT | LU | MT | NL | PL |
PT | RO | SK | SI | ES | SE | UK(NI) |
IS | LI | NO | CH | TR |
2.4 GHz band restrictions: Norway: This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-Ålesund.
Receiver Category 2: Ensure the power adapter used meets the requirements of Clause 6.4.5 in IEC/EN 62368-1 and has been tested and approved according to national or local standards.
Frequency Bands and Power
This tablet offers the following frequency bands in EU areas only and maximum radio-frequency power:
- Bluetooth: 20 dBm
- Wi-Fi 2.4 GHz band: 20 dBm
- Wi-Fi 5 GHz: 5150 to 5250MHz: 23 dBm, 5250 to 5350 MHz: 20 dBm, 5470 to 5725 MHz: 20 dBm, 5725 to 5850 MHz: 14 dBm
- Wireless reverse charging: 145 KHz < 42 dBuA/m at 10m Distance
FCC Regulations
This tablet complies with part 15 of the FCC Rules. Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This tablet has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Information (SAR)
This device meets the government's requirements for exposure to radio waves. It is designed and manufactured not to exceed emission limits for radio frequency (RF) energy. The exposure standard for wireless devices uses Specific Absorption Rate (SAR).
The SAR limit set by the FCC is 1.6 W/Kg. For body-worn operation, this device has been tested and meets FCC RF exposure guidelines for use with an accessory that contains no metal. RF exposure compliance with any body-worn accessory containing metal was not tested or certified, and use of such an accessory should be avoided.
FCC Note
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.
UK Regulations
Declaration of Conformity
Xiaomi Communications Co., Ltd. declares that this Tablet with Bluetooth and Wi-Fi 21051182G is in compliance with the essential requirements and other relevant provisions of the UK Radio Equipment Regulations 2017 (SI 2017/1206). The full text of the UK declaration of conformity is available at: www.mi.com/en/certification
RF Exposure Information (SAR)
This device is in compliance with Specific Absorption Rate (SAR) limits for general population/uncontrolled exposure (Localized 10-gram SAR for trunk, limit: 2.0W/kg) specified in Council Recommendation 1999/519/EC, ICNIRP Guidelines, and UK Radio Equipment Regulations 2017 (SI 2017/1206).
During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands.
When attaching the device near the body, a belt clip or holster should be used which does not contain metallic components. RF exposure compliance was not tested or certified with any accessory containing metal worn on the body, and use of such an accessory should be avoided.
Certification Information (Highest SAR)
SAR 10 g limit: 2.0 W/Kg. SAR Value: Body: 0.350 W/Kg (0 mm distance).
Legal Information
This device may be operated in all EU member states. Observe national and local regulations.
This device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range in Hong Kong and UK.
AT | BE | BG | HR | CY | CZ | DK |
EE | FI | FR | DE | EL | HU | IE |
IT | LV | LT | LU | MT | NL | PL |
PT | RO | SK | SI | ES | SE | UK(NI) |
IS | LI | NO | CH | TR |
2.4 GHz band restrictions: Norway: This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-Ålesund.
Receiver Category 2: Ensure the power adapter used meets the requirements of Clause 6.4.5 in IEC/EN 62368-1 and has been tested and approved according to national or local standards.
Frequency Bands and Power
This tablet offers the following frequency bands in EU areas only and maximum radio-frequency power:
- Bluetooth: 20 dBm
- Wi-Fi 2.4 GHz band: 20 dBm
- Wi-Fi 5 GHz: 5150 to 5250MHz: 23 dBm, 5250 to 5350 MHz: 20 dBm, 5470 to 5725 MHz: 20 dBm, 5725 to 5850 MHz: 14 dBm
- Wireless reverse charging: 145 KHz < 42 dBuA/m at 10m Distance
E-label
This device has an electronic label for certification information. To access it, please go to Settings > About tablet > Certification, or open Settings and type "Certification" into the search bar.
Model: 21051182G
2105 indicates that this product will be launched after 202105.
When using this device as a wireless charger, it is intended for use as a desktop device and should not be carried when in this mode. To comply with RF exposure requirements when using in wireless charging mode, please place the device at a minimum distance of 20cm from persons.
Adapter
Manufacturer: Xiaomi Communications Co.,Ltd.
Address: #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China
Model: MDY-11-EN
Input Voltage: 100-240V~
Input Frequency: 50/60Hz
Output Voltage: 5.0V/9.0V/12.0V/10.0V
Output Current: 3.0A/2.23A/1.67A/2.25A Max
Output Power: 15.0W/20.0W/20.0W/22.5W Max
Average Active Efficiency: 81.39%
Disclaimer
This quick start guide is published by Xiaomi or its local affiliated company. Improvements and changes to this guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Xiaomi at any time and without notice. Such changes will, however, be incorporated into new online editions of the quick start guide (please see details at www.mi.com/global/service/userguide).
All illustrations are for illustration purposes only and may not accurately depict the actual device.
Manufacturer's Authorized UK Representative: Xiaomi Technology UK Limited
Address: Part Ground Floor, North Wing, 100 Brook Drive, Green Park, Reading
Manufacturer: Xiaomi Communications Co., Ltd.
Manufacturer postal address: #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China, 100085
Brand: Xiaomi Model: 21051182G
© Xiaomi Inc. All rights reserved.