Lumens – Pro AV Technology | Lumens
Lumens – Pro AV Technology | Lumens
Installation Guide for Lumens models including: VS-KB21, VS-KB21N, VS-KB21 IP Camera Controller, VS-KB21, IP Camera Controller, Camera Controller, Controller
설치 안내서 | Lumens
File Info : application/pdf, 2 Pages, 1,014.71KB
DocumentDocumentVS-KB21/VS-KB21N Quick Installation Guide www.MyLumens.com 1. Product IO Overview Camera Camera Ethernet Switch RS-422 Port RS-232 Port Ethernet port Power Button Firmware Update Port Power Supply Anti-theft lock slot USB Disk Power Supply Adapter + Power Cable Ethernet port supports PoE (IEEE 802.3af) power supply RS-232/ RS-422 port do not support POE. Please do not connect with POE Switch 2. Menu Main Button Operation Instructions When the menu is activated, the Focus button is the main control button. Left/Right rotation: Adjust parameters and navigate the menu Press: Perform "Confirm" action Keyboard Cat5e network cable Cat5e network cable Router 5.2 Add the camera to the device list Camera (1) Automatic search camera Press [SEARCH] > Select search mode > Select camera > Save camera to list VISCA Over IP ONVIF NDI (only applicable to VS-KB21N) 3. Initial setting 3.1 Use the DC 12V power cord provided with the accessory or power it with a PoE (IEEE 802.3af) compatible network switch 3.2 Use the network cable (CAT5e or CAT6) to connect the IP port on the back of the keyboard to the local area network 3.3 If using power cord for power supply, please press the power button to turn on the control keyboard 4. Camera Setting IP Control Confirm that the camera and the control keyboard are on the same network segment, such as 192.168.100.xxx RS-232/RS-422 Control Confirm that the camera control port/protocol/baud rate/VISCA address and other parameter settings match the control keyboard Depending on the camera, the following methods are supported to adjust the parameters Setting Menu: [System] Webpage: (According to different webpage versions, there are two possible paths for settings.) [Settings] > [Maintenance] > [System Services] > [Control Port/Protocol/Baud Rate] [System] > [Control] > [Protocol] > [Baud Rate] Camera bottom Dip Switch settings 5. How to Connect IP 5.1 Connect the keyboard and camera to the network switch *If not connected to a network switch, the default IP for the control keyboard is 192.168.100.100. Please set the camera to the same network segment (2) Manually add camera Press [SETTING] > [Device Management] > Set Control Protocol/IP Address > Save to List 5.3 Confirm CAM ID in the [CAM LIST] 5.4 Call the camera Press the number and then [CAM] to call the camera. e.g > 5.5 Preview streaming video IP connection supports previewing camera RTSP streaming. Confirm screen display preview icon > press [PVW] > display camera RTSP streaming image *Press the [PVW] button again to exit the streaming video screen OCT. 2023 VS-KB21/VS-KB21N Quick Installation Guide RS-232 6. RS-232/RS-422 Connection Instruction www.MyLumens.com 6.1 Please refer to the pin definitions of RS-232/RS-422 for connecting the camera and control keyboard. RS-232 connection can be used with Lumens optional accessory VISCA cable extender (VC-AC07), combined with a network cable, no need to wire it yourself to use with control keyboard 6.2 Set camera Press [SETTING] > [Hot Key Camera] > select camera > set VISCA/IP address/baud rate and other information to match the camera RS-422 6.3 Call the camera Setup complete, select the [Hot Key Camera] (e.g. ) to call the camera 6.4 If the camera is daisy chained, please refer to the pin definition of camera to complete the connection of multiple cameras. For questions about the installation, please scan the QR Code. A support person will be assigned to assist you.