VEVOR Ozone Generator

Product Overview

This document provides technical support and e-warranty information for the VEVOR Ozone Generator, Model SS-Y01. VEVOR is committed to providing tools at competitive prices, with savings estimates compared to major brands.

The Ozone Generator is designed for air purification, sterilization, and deodorization. It utilizes ozone (O3), an allotrope of oxygen (O2), which is a powerful oxidizing agent effective against bacteria, viruses, harmful chemicals, and odors.

Note: This is an original instruction manual. Please read all instructions carefully before operating the appliance. VEVOR reserves the right to interpret the user manual and may update technology or software without prior notice.

Important Safeguards

When using electrical appliances, basic safety precautions should be followed:

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE

WARNING - To reduce the risk of fire, electric shock, or injury:

• Do not leave the appliance plugged in. Unplug from the outlet when not in use and before servicing.
• Do not use outdoors or on wet surfaces.
• Do not allow children to play with the appliance. Cleaning and user maintenance should not be performed by children without supervision.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction by a responsible person. Children should be supervised to ensure they do not play with the appliance.
• To protect against electrical hazards, do not put the ozone generator in water or other liquids.
• Do not operate the ozone generator or any other electrical equipment with a damaged cord or plug, or after the unit malfunctions or is dropped or damaged in any manner. Return it to the nearest authorized service facility for examination, repair, or adjustment.
• Do not let the cord hang over the edge of the table or counter or touch hot surfaces.
• Put this instruction manual in a safe place. Do not discard.
• If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or a similarly qualified person to avoid a hazard.
• Electric Shock Danger! Non-professional personnel are forbidden to repair the products; otherwise, it may result in electrical shock. When failures happen, it should be repaired by qualified maintenance personnel.
• Do not place the product directly on fire or near the source of fire, as this may damage the product or cause danger. If part of the product catches fire, do not use water to extinguish it; use a wet cloth to cover the fire site.
• When the plug is inserted into the socket, ensure it is fully plugged in to prevent overheating and burning due to poor contact.
• WARNING! It is strictly prohibited to immerse the main body of the machine and the power cord into any liquid. Unplug from the outlet before any routine cleaning or maintenance.
• WARNING! Use in unoccupied spaces only.
• WARNING! It is forbidden to use in flammable, explosive, humid, and other harsh environments.
• WARNING! It is forbidden to cover the air inlet and outlet, and the exhaust hole must not be blocked by foreign objects.

Cautions

• The ozone generator is a high-voltage product and should be placed in a safe place and ensured to be in a solid state when in use.
• When the ozone generator is working, ensure there are no people, pets, or living things in the room.
• Ozone has strong oxidizing properties; the operating time of the device should not exceed 2 hours each time.
• Ozone is extremely unstable and decomposes into oxygen (O2) within a few hours, leaving no pollution or residue.
• Ozone has a distinct smell; if you are sensitive to the smell of ozone, please keep away from the device.
• Non-professionals are not allowed to disassemble the device without authorization. If it is not used for a long time, the power supply should be cut off.
• The device must be powered off during maintenance, and the power must be cut off immediately if any abnormality is found.

Functional Application

Ozone (O3) is an allotrope of oxygen (O2) and is gaseous at room temperature. At low concentrations, it is colorless with a grassy smell. Ozone possesses strong oxidizing properties, making it effective against bacteria, harmful chemicals (like formaldehyde, benzene, ammonia), leading to sterilization, disinfection, deodorization, and decomposition of harmful gases. It is recognized globally for its ability to directly sterilize food and beverages.

• The strong oxidizing properties of ozone can remove toxic substances released by decoration, synthetic boards, and paints. It kills airborne bacteria and viruses, eliminates microorganisms in carpets, prevents flu, and increases indoor oxygen content.
• Ozone offers excellent odor removal performance by decomposing odor-causing substances like amine R3N, hydrogen sulfide H2S, and methyl mercaptan CH2SH.

Parameter Table

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

How to Use

1. Insert the plug of the power cord into the socket of the disinfection machine and connect the other end to the 120V 60Hz AC power supply. [Illustration: Electrical plug]
2. Turn on the power switch of the sterilizer. The red light indicates the machine is powered on. [Illustration: Red illuminated power switch]
3. Set working status:
   • Normally Open: Turn the timing knob counterclockwise. When the pointer aligns with the "HOLD" gear, the device starts without a timer function.
   • Off: Turn the knob so the pointer aligns with the "OFF" gear; the equipment stops working.
   • Timing: Turn the knob clockwise. The pointer aligns with the number on the dial, setting the working time. The equipment stops working at the end of the set time. (Example: Pointer at 40 means the device will shut down after 40 minutes of operation.) [Illustration: Control dial showing settings like OFF, 20, 40, 60, 80, 100, 120, HOLD]

Note: Regardless of the mode (normally open or timing), the cumulative working time for a single operation should not exceed 1 hour.

Additional Precautions

• It is forbidden to use in flammable, explosive, humid, and other harsh environments.
• It is forbidden to cover the inlet and outlet.
• People should be evacuated temporarily when the equipment is working.
• The power must be cut off during equipment maintenance.
• Non-professionals are not allowed to disassemble the equipment without authorization.
• Cut off the power supply if it is not used for a long time.
• The cumulative working time at one time does not exceed 1 hour, and the equipment can be restarted after cooling down.
• Regularly check whether the equipment is working normally and immediately cut off the power supply if any abnormality is found.

Contact and Support

For product questions or technical support, please contact:

Technical Support and E-Warranty Certificate

www.vevor.com/support

Made In China