芯联创展-RFID专业技术服务商|E710|E510|E310 RFID模块
百度翻译-200种语言互译、沟通全世界！芯联创展-RFID专业技术服务商|E710|E510|E310 RFID模块
User Manual for SILION models including: SIM3200, SIM3200 UHF RFID Module, UHF RFID Module, RFID Module, Module
Beijing Silion Technology Corp.,LTD. SIM3200 2AQ9M-SIM3200 2AQ9MSIM3200 sim3200
File Info : application/pdf, 11 Pages, 329.90KB
DocumentDocumentSIM3200 User Manual SIM3200 User Manual Rev 1 Beijing Xinlian Chuangzhan Electronic Technology Co., LTD Tel:+86010-62153842/62153840 http://www.silion.com.cn Page 1 of 11 SIM3200 User Manual Directory 1. A revision history ..................................................................................................................... 3 2. Product introduction ................................................................................................................. 4 3. Product features ....................................................................................................................... 4 4. Electrical characteristics .......................................................................................................... 5 5. Pin configuration and function Description ................................................................................6 6. Application Information ............................................................................................................ 7 7. Physical Properties ................................................................................................................... 8 Page 2 of 11 SIM3200 User Manual 1. A revision history The file number The version number Artificial person / The modifier Proposed/revis ed date Change the reason Change the content V1.0 2021-10-16 The initial release No Page 3 of 11 SIM3200 User Manual 2. Product introduction The UHF high-power module SIM3200 is a high-performance UHF RFID read-write module developed by the technology team of Xinliangzhan based on the new generation of IMPINJ RF chip E710. It is specially designed to meet the requirements of high-performance RFID handheld devices, mobile or portable RFID devices. The SIM3200 module provides one MMCX antenna interface, supporting up to 33 dBm RF output. This module has the characteristics of low power consumption, small size and high sensitivity. Combined with the advanced multi tag algorithm of Xinliangzhan, it is a priority for RFID mobile devices. 3. Product features New generation E710 RF chip Impinj new generation E710 UHF RF reader chip is adopted, which has high sensitivity, wide reading range, low power consumption and strong performance. Super tag reading performance The tag reading speed is fast, the reading is stable, the multi tag anti-collision ability is strong, and the reading distance is long. When using the 4dBi four wall spiral antenna, the reading distance is more than 9 meters, and the multi tag reading speed is fast, up to 900 pieces/second. Lower power consumption It can work normally in the 3.6V low voltage mode. The maximum power output power consumption is 6.5W, and the standby power consumption is only 0.25W. The excellent low power consumption design makes the product have a longer service life. Multiple monitoring functions and excellent stability The module supports label RSSI detection, antenna connection status detection, and working temperature detection. Multiple data detection is more convenient for users to use efficiently; The module can work stably in the ambient temperature of -20 to+65, and supports stable operation in the ambient humidity of 5% - 95%. It has high efficiency and stable performance and can be applied to a variety of harsh working environments. Page 4 of 11 SIM3200 User Manual 4. Electrical characteristics parameter min conditions Frequency Frequency range According Customization 840 Frequency step value According Customization output output power 5 Output power accuracy Flatness of output power Channel isolation label Reception sensitivity Profile1 Inventory label speed Label cache peak 96 bit EPC Logic level VILInput Low Voltage -0.5 VIHInput High Voltage 2 Temperature range Storage temperature -40 Working temperature -20 The input power The power supply voltage 3.6 Can make model Standby mode Read the card model Pout=30dBm, 50 Load The current will vary depending on the load antenna. type max unit 960 250/500 MHz KHz 33 dBm +/- 1 dB +/- 0.2 dB 32 dB -81 dBm 900 tag/s 1000 1200 tag 0.8 V Vdd+0.5 V 85 65 5.0 5.25 V 40 mA 50 mA 1300 mA Page 5 of 11 SIM3200 User Manual Absolute maximum rated parameter parameter rating power supply voltage +5V Digital I/O Voltage to GND 3.3V Working temperature -20 ~ +65 Storage temperature -40 ~ +85 5. Pin configuration and function description 5.1 Definition of FPC connector The serial number 1 2 3 4 5 6 define VCC(+3.6 - 5V) VCC(+3.6 - 5V) GND GND EN module power enableLOW(POWER DOWN) HIGH&DISCONNECT(ACTIVE) Digital Output 2 GPIO OUT2 Page 6 of 11 SIM3200 User Manual 7 Digital Input 1 GPIO IN1 8 Digital Input 2 GPIO IN2 9 RXD (DATA INPUTTTL level) 10 TXD (DATA OUTPUTTTL level) 11 RST (LOW ACTIVEPlease hang in the air if not used) 12 Digital Output 1 GPIO OUT1 5.2 Definition of bottom welding point The serial number 1 2 3 4 5 6 7 8 9 define GND GND VCC(+3.6 - 5V) VCC(+3.6 - 5V) EN module power enableLOW(POWER DOWN) HIGH&DISCONNECT(ACTIVE) RXD (DATA INPUTTTL level) TXD (DATA OUTPUTTTL level) RST (LOW ACTIVEPlease hang in the air if not used) Digital Output 1 GPIO OUT1 6. The application of information The input power It is recommended to filter the VCC port with a capacitance of 100~470uF to reduce the traction t o the power supply caused by the quick opening and closing of the power amplifier during RF tran smission. 0.1uF/100pF capacitors filter out power supply ripple in different frequency bands. Since the current is high when the module is working at full power, the module may not work sta bly when the battery is low when the handheld device is powered directly by the battery, so it is r ecommended to boost the VCC to 5V. Enable or reset Page 7 of 11 SIM3200 User Manual EN is enabled, with built-in pull-up resistance (100k) to VCC. When the module is powered on at h igh level or suspended, the module will be powered off when it is connected to low level (low leve l should be less than 0.4V, high level should be greater than 0.9V and less than VCC). Rst reset, built-in pull-up resistance to 3.3V, reset when connected to low level. GPIO interface Input: Logic low 0.8V minimum 0V Logic high 2 V Maximum 3.3 V Output: Logic Low maximum 0.4V Logic High has a minimum of 2.9V and a maximum of 3.3V The maximum output current of the I/o port is 5mA. The antenna connection The output impedance of the antenna port is 50 ohms, and the antenna standing wave ratio is rec ommended to be less than 1.5. A better antenna standing wave ratio can get better card reading effect. Communication interface (rxd/txd) The communication interfaces RXD and TXD are at TTL level, and the default baud rate is 115200b ps 7. Physical properties Product size74.8mm × 48.5mm × 8mm weight56g Page 8 of 11 SIM3200 User Manual Page 9 of 11 SIM3200 User Manual FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Page 10 of 11 SIM3200 User Manual This product complies with the radio interference requirements of the European Community. Product name: RFID module Product model: SIM3200 Manufacturer: Beijing Silion Technology Corp.,Ltd. Frequency Range: 865.7MHZ~867.5MHZ Max. Transmit Power: 30dBm Max SIMPLIFIED EU DECLARATION OF CONFORMITY The simplified EU declaration of conformity referred to in Article 10(9) shall be provided as follows: Hereby, Beijing Silion Technology Corp.,Ltd.declares that radio equipment type SIM3200 is in compliance with Directive 2014/53/EU, and this product is allowed to be used in all EU member states. The full text of the EU declaration of conformity is available at following company website: https://www.silion.com.cn This product can be used across EU member states. EUT Operating temperature: -25~65 Page 11 of 11