POCO X5 Pro 5G Quick Start Guide

Getting Started

A front view of a smartphone shows the screen displaying time (02:48, SAT. 16 AUG.). Labels indicate 'Volume Buttons' and 'Power Button' on the right side. The bottom shows a 'USB Type-C Port'. Below this, a diagram shows a smartphone with an arrow indicating the removal/insertion of a 'Nano-SIM' card.

Thank you for choosing the POCO X5 Pro 5G. To turn on the device, long-press the power button. Follow the on-screen instructions to configure your device. For more information, visit the official website: www.mi.com/global/service/userguide.

MIUI (for POCO)

The POCO X5 Pro 5G comes pre-installed with MIUI (for POCO), a customized Android-based OS offering frequent updates and user-friendly features based on global user feedback. For more information, visit en.miui.com.

About SIM

Please do not insert non-standard SIM cards into the SIM card slot, as they may damage the SIM card slot. WARNING: Do not disassemble this device.

Environmental Information

WEEE

Special precautions are required for the safe disposal of this product. This marking indicates that the product should not be discarded with other household waste within the EU. To prevent environmental or human health harm from improper waste disposal and to promote sustainable material reuse, please recycle responsibly. Use return and collection systems or contact the retailer where the device was purchased for safe recycling.

View Environmental Declaration: www.mi.com/en/about/environment

Important Safety Information

General Precautions

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS.

To prevent possible hearing damage, avoid listening at high volume levels for extended periods.

Additional safety information and precautions are available at: www.mi.com/en/certification

Device Usage and Handling

• Use of unauthorized cables, power adapters, or batteries may cause fire, explosion, electric shock, or damage to the device.
• The device operates within a temperature range of 0°C to 40°C. Using it outside this range may cause damage.
• If your device has a built-in battery, do not attempt to replace it yourself to avoid damage.
• Charge the device only with the included or authorized cable and power adapter. Use only compatible authorized accessories.
• Disconnect the adapter from the device and power outlet after charging is complete. Do not charge for more than 12 hours.

Battery Safety

• Batteries must be recycled or disposed of separately from household waste. Mishandling can cause fire or explosion. Dispose of or recycle the device, battery, and accessories according to local regulations.
• Do not disassemble, hit, crush, or burn the battery. Stop using immediately if the battery appears deformed or damaged.
• Do not short-circuit the battery, as this can cause overheating, burns, or injury.
• Do not place the battery in high-temperature environments; overheating may cause explosion.
• Do not disassemble, hit, or crush the battery, as this may cause leaks, overheating, or explosion.
• Do not burn the battery, as this may cause fire or explosion.
• Users must not remove or alter the battery. Battery removal or repair should only be performed by an authorized repair center.

General Care

• Keep your device dry.
• Do not attempt to repair the device yourself. Contact Mi customer support or an authorized repair center if any part malfunctions.
• Connect other devices according to their manuals. Do not connect incompatible devices.
• For AC/DC adapters, the socket-outlet should be installed near the equipment and be easily accessible.

Safety Precautions

• Observe all applicable laws and rules restricting mobile phone use in specific situations and environments.
• Do not use your phone in explosive atmospheres (e.g., petrol stations, fueling areas, below decks on boats, fuel/chemical storage facilities, or areas with chemical dust/powders). Obey posted signs to turn off wireless devices. Turn off your phone in blasting areas or areas requiring "two-way radios" or "electronic devices" to be off.
• Do not use your phone in hospital operating rooms, emergency rooms, or intensive care units. Comply with all hospital rules. Consult your doctor and the device manufacturer if you have a medical device. Maintain a minimum distance of 15 cm between your phone and a pacemaker, using the phone on the ear opposite the pacemaker and not carrying it in a breast pocket. Avoid use near hearing aids, cochlear implants, or similar devices.
• Observe aircraft safety regulations and turn off your phone on board aircraft when required.
• Use your phone in accordance with traffic laws and regulations while driving.
• To avoid lightning strikes, do not use your phone outdoors during thunderstorms.
• Do not make calls while charging.
• Avoid using your phone in high humidity places (like bathrooms) to prevent electric shock, injury, fire, or charger damage.

Security Statement

Update your phone's operating system using the built-in software update feature or visit an authorized service outlet. Updating via other means may damage the device or lead to data loss, security issues, and other risks.

Regulatory Information

EU Regulations

RED Declaration of Conformity

Xiaomi Communications Co., Ltd. declares that this GSM / GPRS / EDGE / UMTS / LTE / 5G NR Digital Mobile Phone with Bluetooth and Wi-Fi 22101320G complies with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: www.mi.com/en/certification

RF Exposure Information (SAR)

This device complies with Specific Absorption Rate (SAR) limits for general population/uncontrolled exposure (Localized 10-gram SAR for head and trunk: limit 2.0W/kg) as specified by Council Recommendation 1999/519/EC, ICNIRP Guidelines, and RED (Directive 2014/53/EU). During SAR testing, the device was set to transmit at its highest certified power level in all tested frequency bands and placed in positions simulating RF exposure. For head use, there was no separation. For body use, a separation of 5 mm was maintained. SAR compliance for body operation is based on a 5 mm separation distance. Carry the device at least 5 mm away from the body. When attaching the device near the body, use a non-metallic belt clip or holster that maintains at least 5 mm separation. RF exposure compliance was not tested or certified with any metal-worn body accessory, and such accessories should be avoided.

Certification Information (Highest SAR)

SAR 10 g limit: 2.0 W/Kg. SAR Value: Head: 0.99 W/Kg, Body: 0.99 W/Kg (5 mm distance).

Legal Information

This device may be operated in all EU member states. Observe national and local regulations. The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range in AT, BE, BG, HR, CY, CZ, DK, EE, FI, FR, DE, EL, HU, IE, IT, LV, LT, LU, MT, NL, PL, PT, RO, SK, SI, ES, SE, UK(NI), IS, LI, NO, CH, TR. This device is restricted to indoor use only when operating in the 5150 to 5350 MHz in Hong Kong.

2.4 GHz Band Restrictions

Norway: This subsection does not apply within a 20 km radius of Ny-Ålesund.

Power Adapter Requirements

Ensure the power adapter meets IEC/EN 62368-1 Clause 6.4.5 requirements and is tested/approved according to national or local standards.

Frequency Bands and Power

The mobile phone supports the following frequency bands (EU/UK only) and maximum radio-frequency power:

5G connection depends on country, carrier, and user environment.

FCC Regulations

This mobile phone complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation. This phone has been tested and found to comply with Class B digital device limits per Part 15 of FCC Rules, designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used per instructions, it may cause harmful interference to radio communications. No guarantee of no interference in a particular installation. If interference occurs, users are encouraged to correct it by reorienting/relocating the antenna, increasing separation between equipment and receiver, connecting to a different circuit, or consulting a dealer/technician.

RF Exposure Information (SAR)

This device meets government requirements for radio wave exposure. It is designed and manufactured not to exceed emission limits for radio frequency (RF) energy. The exposure standard uses Specific Absorption Rate (SAR). The FCC SAR limit is 1.6 W/Kg. For body-worn operation, the device has been tested and meets FCC RF exposure guidelines for use with a non-metallic accessory, maintaining a minimum 1.5 cm separation from the body. RF exposure compliance with metal-worn body accessories has not been tested or certified and should be avoided. Any body-worn accessory must maintain a minimum 1.5 cm separation from the body.

FCC Note

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Shielded cables must be used to ensure compliance with FCC Class B limits.

UK Regulations

Declaration of Conformity

Xiaomi Communications Co., Ltd. declares that this GSM / GPRS / EDGE / UMTS / LTE / 5G NR Digital Mobile Phone with Bluetooth and Wi-Fi 22101320G complies with the essential requirements and other relevant provisions of the UK Radio Equipment Regulations 2017 (SI 2017/1206). The full text of the UK declaration of conformity is available at: www.mi.com/en/certification

RF Exposure Information (SAR)

This device complies with Specific Absorption Rate (SAR) limits for general population/uncontrolled exposure (Localized 10-gram SAR for head and trunk: limit 2.0W/kg) as specified in Council Recommendation 1999/519/EC, ICNIRP Guidelines, and UK Radio Equipment Regulations 2017 (SI 2017/1206). During SAR testing, the device was set to transmit at its highest certified power level in all tested frequency bands and placed in positions simulating RF exposure. For head use, there was no separation. For body use, a separation of 5 mm was maintained. SAR compliance for body operation is based on a 5 mm separation distance. Carry the device at least 5 mm away from the body. When attaching the device near the body, use a non-metallic belt clip or holster that maintains at least 5 mm separation. RF exposure compliance was not tested or certified with any metal-worn body accessory, and such accessories should be avoided.

Certification Information (Highest SAR)

SAR 10 g limit: 2.0 W/Kg. SAR Value: Head: 0.99 W/Kg, Body: 0.99 W/Kg (5 mm distance).

Legal Information

This device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range in Hong Kong.

Frequency Bands and Power

The mobile phone supports the following frequency bands (EU and UK only) and maximum radio-frequency power:

5G connection depends on country, carrier, and user environment.

E-label

This device has an electronic label for certification information. Access it via Settings > About phone > Certification, or by searching "Certification" in Settings.

Adapter Information

Manufacturer: Xiaomi Communications Co.,Ltd.

Address: #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China

Model: MDY-12-EG

Input Voltage: 100-240 V~

Input Frequency: 50/60 Hz

Output Voltage: 5.0 V / 5.0 - 20.0 V

Output Current: 3.0 A / 6.2 - 3.25A

Output Power: 15.0 W / 67.0 W Max

Average Active Efficiency: ≥82.0%

Disclaimer

This user guide is published by Xiaomi or its local affiliated company. Improvements and changes may be made by Xiaomi at any time without notice due to typographical errors, inaccuracies, or program/equipment improvements. Such changes will be incorporated into new online editions of the user guide (see www.mi.com/global/service/userguide). Illustrations are for purpose only and may not accurately depict the actual device.

Manufacturer Details

Manufacturer: Xiaomi Communications Co., Ltd.

Manufacturer Postal Address: #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China, 100085

Brand: POCO

Model: 22101320G

© Xiaomi Inc. All rights reserved.