Instruction Manual for VEVOR models including: ZH602 Living Room Table Set, ZH602, Living Room Table Set, Room Table Set, Table Set, Set

司顺工业设计


File Info : application/pdf, 16 Pages, 680.91KB

PDF preview unavailable. Download the PDF instead.

SKU2--质汇-客厅桌套装说明书(生产版) 1741916798230
LIVING ROOM TABLE SET
MODEL:ZH602

MODEL:ZH602

LIVING ROOM TABLE SET

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
1

SAFETY INSTRUCTIONS WARNING: WARNIND FOR YOUNG CHILDREN-This product contains small components,please ensure that they are kept away from small children while assembling. NOTES: 1. Do not skip any step. 2. Do not fully tight screws until all the parts are assembled.
Thank you very much for choosing this Living Room Table Set. Please read all of the instructions before using it.The information will help you achieve the best possible results. SAVE THIS MANUAL
2

PARTS LIST
3

ASSEMBLY STEP
ATTENTION 1. When you begin each step, please check carefully whether you have taken the correct parts so as not to use the wrong parts and cause the wrong assembly. 2. We recommend that you do not rush to tighten the screws. lt is best to tighten the screws to two-thirds first, after all the steps are installed and the position is well adjusted, then tighten each screw in turn.
4

5

6

7

8

9

Tips: 1. When your table wobble on the carpet or floor, this caps has room to help you adjust the height of the four legs and solve the issue of shaking. 2. If you accidentally spill water on the table top, please wipe it with a dry towel in time, to prevent the wooden part from being soaked.
NOTE
1.The product is intended for indoor use only. The product must be assembled and used under the provisions of the manual. Personal injury and/or damage to the product may occur if products are used outside of heir intended purposes and/or if products have been changed/modified from their original design. 2.The seller does not assume any responsibility or liability concerning any injury/damage caused by incorrect assembly or improper use. 3.Avoid long-term exposure to humid environments to prevent mildew. 4.Keep the product away from fire sources and high temperatures. 5.Do not expose the product to direct sunlight. 6.Do not place any hot objects on the surface of the product. 7.If there are any defective or missing parts after unpacking, please cease assembly immediately and contact us. 8.Please assemble the item on a spacious surface and do not place the unwrapped product directly on the ground to avoid product damage Please do not stand or sit on the wooden boards. 9.Please wear gloves during the assembly and/or dis-assembly process to avoid scratches from any sharp edges. 10.Please match the corresponding part and fitting based on the part number in the manual. 11.If the part does not match with the fitting, please check the piece as specified in this manual. 12.During assembly, first loosely align all screws with the corresponding pre-drilled holes and then tighten the screws one by one 13.Periodically inspect screw tightness while the product is in use. if necessary, retighten to ensure structural integrity 14.If you accidentally spill water or another liquid on the surface, immediately wipe clean with a dry towel.
10

15.Please keep the product away from sharp, pointed objects and corrosive substances to prevent product damage. Please place this item on the level solid ground during use.
PRODUCT PARAMETER

Model Safe Loading Weight Quantity Product Size

ZH602 Coffee table 200lbs End table 200lbs Coffee table1pcs End table2pcs Coffee table800*800*465mm End table400*400*600mm

11

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN. Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK EC

REP REP

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX
E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main.



References

WPS 文字