Olympia RGBW LED Sports Lighter
Architectural Flood and Spot Luminaires
Brand: Olympia
Features & Benefits
- Directive 15° ~ 60° Beam Angle
- 10-Years / 80,000 Hours Warranty
- Input Voltage Range 208Vac ~ 480Vac
- IP66 Suitable for Damp & Wet Locations
- Built-in 20KV/10KA Surge Protection (SPD)
- DMX512 Dimming and RGBW Color Controls
- 4-Channels (RGBW) Remote Driver Operation
- Flicker Free <2%, Low THD <20%, High PF >0.95
Certifications: Water Proof (IP66), 20KV/10KA Surge Protection, 10 Years Warranty, RoHS Compliant, DLC Certified, CE Marked, UL Listed, ISO 9001:2015 Certified Company.
Product Specifications
| Model | Product | Size | Power | Flux | HID Equal |
|---|---|---|---|---|---|
| SFL-800WD-55K-xF-480V RGBW DMX512 | RGBW LED Stadium Flood Light DMX512 Control 800W WHT 55K 15° 480V | Ø 18" (H) 20" | 800W | 120,000 Lumens White | 1,000W ~ 1,500W |
Technical Details:
- Input Voltage: 208-480Vac ~50/60Hz
- Power Factor (P.F.): > 0.95
- Total Harmonic Distortion (THD): < 20%
- Colors Wavelength: RED: 620-630nm; GREEN: 520-530nm; BLUE: 465-475nm
- White Color Temp. "55K": CCT 5500K ±5%
- Efficacy: ~150 Lm/W
- Color Rendering Index (CRI): > 80
- Connection: Cable & J-Box
- Rated Life: 80,000 Hrs. (L70 B50) at T[A] 25°C Max.
- IP Rating: IP66 (Equivalent to NEMA Enclosure Rating 4)
- Beam Angle Options ("xF"): "SF" Sharp Flood 15°, "NF" Narrow Flood 40°, "MF" Medium Flood 60°
- EPA: 2.5
- Flicker Free: "Low Optical Flicker" Less than 2%
- Low Glare: <40
- Protocol Support: Supports DMX/RDM Protocols. Available as Internal or Remote Driver.
Installation & Wiring
Wiring Diagram:
POWER:
- Black Wire: Phase (~) or Hot 1
- White Wire: Neutral (0) or Hot 2
- Yellow/Green Wire: Ground
CONTROL:
- BLK/WHT Wire: Vaux+
- PURPLE Wire: DIM+ | DMX+
- PINK Wire: DIM- | DMX-
Wireless Control Setup:
- Connect BLK/WHT Wire to Wireless Control Module POWER IN.
- Connect PURPLE Wire to Wireless Control Module DMX+ or DALI+.
- Connect PINK Wire to Wireless Control Module DMX- or DALI-/COMM.
General Installation Instructions:
- Turn Power OFF before wiring.
- Connect Mains Wires: Phase/Neutral/Ground.
- Connect Dimmer Wires: PURPLE (DIM+) & PINK (DIM-).
- Connect DMX512 Wires: BLK/WHT (Vaux+), PURPLE (DMX+), PINK (DMX-).
- Ensure not to exceed the fixture's Max Rated Voltage (480Vac between Phase to Neutral or Hot 1 & Hot 2).
- Turn Power ON and use Dimmer/DMX to control Light Level & Colors.
WARNING: Turn Power Off during Wiring of LED Fixtures!
Optical Performance & Dimensions
Polar Candela Distribution:
- "SF" Sharp Flood 15°: Shows a concentrated light distribution pattern.
- "NF" Narrow Flood 40°: Shows a wider, less concentrated distribution.
- "MF" Medium Flood 60°: Shows the widest and most diffused distribution.
Fixture Dimensions: Approximately 18 inches in diameter and 20 inches in height.
Remote LED Driver Dimensions (in mm):
- Overall length: 380±2 mm (362 mm without connectors)
- Width: 157.5 mm
- Height: 134 mm (main body) / 152 mm (with connectors)
- Connector details: Part A (Input), Part B (Output), Part C (Daisy Chain Dimming), Part D (Ventilation Valve).
DMX & Connectivity Specifications
| ITEM | SPECS | NOTES |
|---|---|---|
| DMX+ | -6V Min. | DMX to Ground Resistance 25Mohm |
| DMX- | +6V Max. | DMX+ to DMX- Threshold |
| Logic 0/1 | 0.2V | |
| Baud Rate | 250kbps | Communication Baud Rate |
| Flashing | 25fps | On/Off Flashing Rate with DMX |
| Dimming | 5% Min. 100% Max. | Dimming Range |
| Aux | 24Vdc +/- 2.4V 3 Watt Max. | Auxiliary Power Voltage |
| DMX/RDM | Supports DMX/RDM Protocols | |
| DMX Address | Pre-Set | Factory Pre-Addressed or On-Site Manual Addressable |
Dimensions & Weight Comparison
| BUILT-IN DRIVER | REMOTE DRIVER | NOTES | |
|---|---|---|---|
| Model # | SFL-800WD | SFL-800WD RD | Unit Only, No Packing |
| Unit Weight | 61 Lb. [27.7 Kg.] | 45 Lb. [18.6 Kg.] | |
| Packaged Unit Weight | 66 Lb. [30 Kg.] | 46 Lb. [20.9 Kg.] | With Carton |
| Carton Dims | (L) 29½" x (W) 19¾" x (H) 13" [(L) 75 x (W) 50 x (H) 33 CM] | LED Driver 9.9 Lb./[4.5Kg.] |
Model Number Nomenclature
The model number follows the structure: SFL-nnnWD-ccK-yF-xxxV [PC,MS,NC] ABC
- SFL: Stadium Flood Light Fixture Series
- nnnW: Power in Watt (e.g., 300W, 400W, 500W, 600W, 800W)
- ccK: Correlated Color Temperature (CCT) (e.g., 30K=3000K, 40K=4000K, 50K=5000K, 55K=5500K)
- yF: Beam Angle (e.g., SF=Sharp Flood 15°, NF=Narrow Flood 40°, MF=Medium Flood 60°)
- xxxV: Operating AC Voltage (~50/60Hz) (e.g., 277V, 480V)
- [PC,MS,NC]: Optional Integral Controls (PC=Photocell, MS=Motion Sensor, NC=Network Control)
- ABC: Specifies Driver Type (RD=Remote LED Driver, RGBW=Full Color + DMX)
Configuration Table:
| Power (Watt) | CCT | ±10% | Beam Angle | Voltage (Vac ~50/60Hz) | Driver Type / Color |
|---|---|---|---|---|---|
| 300W (SFL-300WD) | 3000K (30K) | 30K | Sharp Flood 15° (SF) | 120~277V (277V) | ABC=RD (Remote LED Drive) |
| 400W (SFL-400WD) | 4000K (40K) | 40K | Narrow Flood 40° (NF) | 208~480V (480V) | ABC=RGBW (Full Color + DMX) |
| 500W (SFL-500WD) | 5000K (50K) | 50K | Medium Flood 60° (MF) | ||
| 600W (SFL-600WD) | 5500K (55K) | 55K | |||
| 800W (SFL-800WD) |
Additional Options (Not Standard - On Request Only):
- Remote LED Driver: Available up to 100ft.
- Integral Controls: Photocell (PC), Motion Sensor (MS), Network Control (NC).
- CCT Options: 2200K (22K), 2700K (27K), 3500K (35K).
- Wattage Options: 320W, 350W, 480W, 700W.
- High Power Laser Pointer for Aiming / Targeting.
