JBL Clip 4 Quick Start Guide
What's in the Box
- JBL Clip 4 Speaker
- USB-C Cable
- Quick Start Guide
Bluetooth Pairing
To connect your JBL Clip 4 to a device:
- Turn on the JBL Clip 4. It will automatically enter pairing mode.
- On your device (e.g., smartphone, tablet), go to Bluetooth settings.
- Select "JBL Clip 4" from the list of available devices.
- Once connected, the speaker will indicate it's ready to play.
Play
Once paired, you can play audio from your connected device. Control playback (play, pause, skip) using your device.
Charging
Connect the included USB-C cable to the JBL Clip 4 and a power source.
The battery indicator will show the charging status. A low battery is indicated when the battery level is low.
Battery Charge Time: 3 hours (using 5V/500mA adapter)
Music Playtime: Up to 10 hours (varies by volume level and audio content)
Carabiner
The integrated carabiner allows you to easily clip the JBL Clip 4 to your backpack, belt, or other gear for portable listening.
Waterproof and Dustproof (IP67)
The JBL Clip 4 is rated IP67 for waterproof and dustproof performance. This means it can be submerged in up to 1 meter of water for up to 30 minutes.
Note: Always ensure the charging port is dry and clean before charging.
Technical Specifications
Specification | Value |
---|---|
Transducer | 40 mm / 1.5" |
Output power | 5 W RMS |
Frequency response | 100 Hz - 20 KHz |
Signal-to-noise ratio | > 85 dB |
Battery type | Lithium-ion polymer 3.885 Wh |
Battery charge time | 3 hours (5 V / 500 mA) |
Music playtime | Up to 10 hours (varies by volume level and audio content) |
Bluetooth version | 5.1 |
Bluetooth profile | A2DP 1.3, AVRCP 1.6 |
Bluetooth transmitter frequency range | 2400 - 2483.5 MHz |
Bluetooth transmitter power | ≤ 10 dBm (EIRP) |
Dimensions (W x H x D) | 86.30 x 134.50 x 46.0 mm / 3.4" x 5.3" x 1.8" |
Weight | 0.239 kg / 0.527 lbs |