Technical Datasheet
SKU: FW100
BASIN FLIP WASTE SLOTTED
TECHNICAL DRAWING
Diagram showing a basin flip waste slotted fitting with dimensions:
- Overall diameter: $\phi$60
- Height: 80
- Flange to thread top: 35-50
- Thread size: G1-1/4
Weight: 0.00049 m³
Dimensions are in millimetres except thread sizes which are BSP imperial.
NOTES
- Our guarantee is subject to the product having been installed, used and maintained in accordance with our instructions.
- All working parts (such as hinges, ceramic disks, cartridges, seals and cistern fittings), which are subject to normal wear and tear, are covered for 36 months from proof of purchase date. This excludes seats, which are covered for 12 months.
- Our guarantee applies to the original purchaser and is non-transferable. Our guarantee is only applicable in the UK and ROI.
- This does not affect your statutory rights.
- Information is provided for guidance only and is non-binding. All measurements are approximate and subject to standard tolerances. We reserve the right to change product specifications without prior notification.