SAMSUNG HW-C700 AV Receiver System User Manual

User Manual for SAMSUNG models including: HW-C700, HW-C700B, HW-C770S, HW-C770BS, HW-C700 AV Receiver System, HW-C700, AV Receiver System, Receiver System

HW-C700-C770S-C770BS-XAC 0616

Samsung HW-C770S User Manual

File Info : application/pdf, 60 Pages, 7.94MB

Samsung-HW-C770S-User-Manual

HW-C700 HW-C700B HW-C770S HW-C770BS
AV Receiver System
user manual

imagine the possibilities
Thank you for purchasing this Samsung product. To receive more complete service, please register your product at
www.samsung.com/register

HW-C700-C770S-C770BS-XAC_0616.in1 1

Downloaded from thelostmanual.org

2010-06-17 10:06:39

Safety information

SAFETY WARNINGS

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN

This symbol indicates "dangerous voltage" inside the product that presents a risk of electric shock or personal injury.
This symbol indicates important instructions accompanying the product.

Note to CATV system installer This reminder is provided to call the CATV system installer's attention to Section 820~40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
WARNING To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

2
HW-C700-C770S-C770BS-XAC_0616.in2 2

Downloaded from thelostmanual.org

2010-06-17 10:06:56

ENG

PRECAUTIONS

3.9 inches

2.7 inches 3.9 inches

Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation slots are not covered. Do not stack anything on top of the amplifier. In order to disconnect the player completely from the power supply, remove the AC plug from the wall outlet, especially when left unused for a long period of time.

During thunderstorms, disconnect the AC plug from the wall outlet. Voltage peaks due to lightning could damage the unit.

Do not expose the unit to direct sunlight or other heat sources.
This could lead to overheating and malfunction of the unit.

Phones

Protect the player from moisture(i.e. vases), and excess heat(e.g.fireplace) or equipment creating strong magnetic or electric fields (i.e.speakers...). Disconnect the power cable from the AC supply if the player malfunctions. Your player is not intended for industrial use.
Use of this product is for personal use only.
Condensation may occur if your player or disc have been stored in cold temperatures.
If transporting the player during the winter, wait approximately 2 hours until the unit has reached room temperature before using.

The batteries used with this product contain chemicals that are harmful to the environment. Do not dispose of batteries in the general household trash.
3

HW-C700-C770S-C770BS-XAC_0616.in3 3

Downloaded from thelostmanual.org

2010-06-17 10:06:56

Features

Digital AV Receiver
This product is a pure digital AV receiver that performs digital signal processing to minimize signal distortion and loss.
Dolby Pro Logic IIx
Dolby Pro Logic IIx is a new technology that provides discrete 7.1 channels out of 2 channel or multi channel sources.It also provides Music,Movie and Game modes. Dolby Pro Logic IIx is an improved surround system that is optimized to a 7.1 CH multimedia system, enabling you to maximize your entertainment experience.

DTS-HD (Master Audio, High Resolution) (Digital Theater Systems - High Definition)
DTS-HD Audio provides the highest quality multi-channel sound possible. It delivers sound quality that matches the clear and vivid images of high-definition video.
DTS
Provides a full range of 6 channels by converting a digital PCM or analog stereo signal using DTS digital matrix decoding.

Dolby Pro Logic IIz
Dolby Pro Logic IIz adds front height channels to surround sound, creating a 7.1 playback system for video games, home music, and movies; bringing enhanced spatial effects and enveloping sound.
DTS 96/24
DTS 96/24 encodes standard 16 bit/44.1 kHz sound to 24 bit/96kHz and applies it to a 5.1 CH sound track.
DOLBY DIGITAL EX
Adds a surround back channel for more spacious sound compared to regular 5.1 channel Dolby Digital.
DTS (Digital Theater Systems)
DTS provides a discrete 5.1 CH digital audio signal for both music and movie contents and uses less compression than Dolby Digital for richer sound.
Dolby Digital Plus
Dolby Digital Plus is the next-generation audio technology for all high-definition programming and media.
Dolby True-HD
Dolby True-HD is Dolby's next-generation lossless technology developed for high-definition disc-based media.

iPod
You can enjoy music files by connecting your iPod/iPhone to the AV Receiver with the supplied iPod dock.
SFE (Sound Field Effect) Using 32bit Audio Digital Signal Processing
Provides more realistic surround sound with normal stereo audio sources.
Anynet+ (HDMI-CEC) Function
Anynet+ is a function that can be used to operate this AV Receiver with a Samsung TV remote control, by connecting the receiver to a SAMSUNG TV using an HDMI Cable. (This function is available only in connection with Samsung TV and DVD player supporting Anynet+(HDMI-CEC).)
DTS-ES (Extended Surround)
The DTS-ES (Extended Surround) system is a new multi digital signal format that was developed by Digital Theater Systems Inc. Supporting full compatibility with the conventional DTS digital surround sound format, the DTS-ES (Extended Surround) system improves the surround signal for a 360degree surround effect. DTS-ES adds an additional rear center surround channel for 6.1 channel sound.

ACCESSORIES

POWER

INPUT SELECT TV SOURCE

AMP/TV

DIMMER

BD/DVD

1 23

4 56

NEO : 6

SLEEP

7 89

PROLOGIC AUDIO ASSIGN

DSP

MUTE

TUNING VOL
/CH ASC

TUNER MEMORY SUBWOOFER

MO/ST

SETUP/MENU

INFO

RETURN

EXIT

BD/DVD

SAT

MULTI CH

VCR / AUX

iPod

Remote Control/ Batteries (AAA size)

FM antenna

User's manual

iPod Dock

ASC microphone

4
HW-C700-C770S-C770BS-XAC_0616.in4 4

Downloaded from thelostmanual.org

2010-06-17 10:07:01

ENG

CONTENTS

Contents

SAFETY INFORMATION
2

2 Safety Warnings 3 Precautions

FEATURES
4

4 Accessories

DESCRIPTION
7

7 Front Panel 8 Rear Panel 10 Display 11 Insert Remote Control Batteries 11 Operation Range of the Remote Control 12 Tour of the Remote Control

CONNECTIONS
14

14 Speaker Positioning 16 Connecting the Speakers 17 Connecting External Devices/Your TV via
HDMI 18 HDMI Function 19 Connecting to your TV 20 Connecting a DVD or BD(Blu-ray) Player 21 Connecting a Cable, Satellite or Set-top Box 22 Connecting a VCR 23 Connecting a CD Player 24 Connecting 7.1 Channel Devices 25 Connecting an iPod 27 Connecting the FM Antenna 27 Connecting Aux Components

BASIC FUNCTIONS OF YOUR AV RECEIVER
28

28 Before Using the AV Receiver 28 Audio Setup 29 Selecting Digital/Analog Input

HW-C700-C770S-C770BS-XAC_0616.in5 5

Downloaded from thelostmanual.org

5
2010-06-17 10:07:02

Contents

SETUP
30

30 Setup Menu Tree 34 Setting the Speaker Size 35 Setting the Speaker Listening Distance 36 Setting the Speaker Level 37 Setting the Test Tone 38 Setting Dolby Pro Logic Mode 38 Setting Dolby Pro Logic IIx 39 Setting Dolby Pro Logic IIz 39 Setting Tone Control 40 Setting NEO:6 Mode 41 Setting EX/ES Mode 42 AV SYNC 42 MP3 Enhancer 42 Smart Volume 43 ASC (Auto Sound Calibration) Setup 44 DRC Setup 44 HDMI Setup 44 Variable Set

OPERATION
45

45 Using the Surround Modes 46 Using the Subwoofer Selection Button 47 Listening to the Radio 48 Using an iPod 50 Convenient Functions 51 Software Upgrade

MISCELLANEOUS
52

52 Operating Your TV With the Remote Control 54 Operating your DVD or BD player with the
remote control

TROUBLESHOOTING
55

55 Troubleshooting

APPENDIX
57

57 Specifications

6
HW-C700-C770S-C770BS-XAC_0616.in6 6

Downloaded from thelostmanual.org

2010-06-17 10:07:02

ENG

Description

FRONT PANEL

123

567 8 9

DESCRIPTION

10 11 12 13 14 15 16 17 18 19 20

1 HEADPHONE JACK

Used to connect a set of headphones.

2 AUX IN JACKS

Auxiliary AV input terminals used to connect a camcorder, portable DVD player or gaming device.

3 ASC MIC JACK

Used to connect the ASC MIC for setting up ASC (Auto Sound Calibration).

4 DISPLAY

Displays the speaker/audio input status, listening mode, etc.

5 S.DIRECT/STEREO BUTTON Used to select the S.DIRECT or STEREO mode.

6 MULTI CH BUTTON

Used to select a connected 7.1 multi channel player.

7 AV SYNC BUTTON

Used to select the Audio Delay Mode.

8 VOLUME CONTROL

Adjusts the volume level.

9 POWER

Turns the receiver on/off.

10 INPUT SELECT BUTTON 11 AUDIO ASSIGN BUTTON

Used to select a source. (FM BD/DVD SAT TV VCR CD AUX 7.1 MULTI CH IPOD AUDIO IPOD VIDEO).
Toggles to select an input mode for the selected source.

12 SOUND EFFECT BUTTON Toggles to select a surround sound mode.

13 SETUP BUTTON

Displays the SETUP menu.

UP(,), DOWN(.), LEFT(<), RIGHT(>) BUTTONS

15 ENTER BUTTON

Used to move the cursor up, down, left or right. Also used to select detailed options in the SOUND EFFECT mode and to change the tone level. Used to select an item in the SETUP menu.

16 TONE CONTROL BUTTON

Used to set the bass, treble level and tone to on/off.

17 ASC BUTTON

Used to select the ASC (Auto Sound Calibration) mode.

18 TUNING MODE BUTTON

Used to select the Manual or Preset mode for FM radio.

19 SELECT BUTTON

Used to change the radio frequency.

20 MEMORY BUTTON

Used to set a preset radio frequency.

HW-C700-C770S-C770BS-XAC_0616.in7 7

Downloaded from thelostmanual.org

2010-06-17 10:07:02

Description
REAR PANEL

6 7 8 9 10

11 12 13 14

15 16

8
HW-C700-C770S-C770BS-XAC_0616.in8 8

Downloaded from thelostmanual.org

2010-06-17 10:07:02

ENG

DESCRIPTION

1 FM ANTENNA JACK 2 MULTI CH IN JACKS 3 HDMI IN JACKS 4 HDMI OUT JACK 5 USB PORT 6 COMPONENT VIDEO IN JACKS 7 COMPONENT VIDEO OUT JACKS 8 iPod JACK

Connect the FM Antenna here. Receives the analog audio signal from an external player with a multi-channel port. Receives digital video and audio signals simultaneously using an HDMI cable. Outputs digital video and audio signals simultaneously using an HDMI cable. Can be only used for firmware upgrades. Receives the component video signal. Outputs the component video signal. Receives the audio/video signal from an iPod.

9 OPTICAL IN JACKS (DIGITAL AUDIO IN) Receives the digital optical audio signal.

10 COAXIAL IN JACK (DIGITAL AUDIO IN) 11 VCR VIDEO IN JACK 12 VCR VIDEO OUT JACK 13 VIDEO IN JACKS 14 VIDEO OUT JACK

Receives the digital coaxial audio signal. Receives the video signal from a VCR. Outputs the video signal to a VCR. Receives the video signal from a video player (BD/DVD, SAT,TV). Outputs the video signal to video devices (TV, Projector etc).

15 VCR AUDIO IN JACKS

Receives the audio signal from a VCR.

16 VCR AUDIO OUT JACKS 17 AUDIO IN JACKS 18 SUBWOOFER AUDIO OUT JACKS 19 SPEAKER OUT TERMINALS

Outputs the audio signal to a VCR. Receives the audio signal from a video player (BD/DVD, SAT,TV, CD). Connect the subwoofers. Speaker connection terminals.

HW-C700-C770S-C770BS-XAC_0616.in9 9

Downloaded from thelostmanual.org

9
2010-06-17 10:07:04

Description
DISPLAY

1 SPEAKER INDICATORS

Displays the connected speakers.

2 LISTENING MODE INDICATORS Displays the current listening mode.

3 TUNING INDICATORS

Displays the status of the current radio broadcast.

4 AUDIO INPUT INDICATORS

Displays the audio input signal type of the currently connected external audio source.

5 SPEAKER LEVEL INDICATOR Displays the speaker level.

6 RADIO FREQUENCY INDICATORS Displays the current radio frequency range.

7 MESSAGE DISPLAY

Informs you of the status of the receiver.

10
HW-C700-C770S-C770BS-XAC_0616.in10 10

Downloaded from thelostmanual.org

2010-06-17 10:07:04

ENG

DESCRIPTION

INSERT REMOTE CONTROL BATTERIES
* Battery size: AAA
M Follow these precautions to avoid leaking or cracking cells:
Place batteries in the remote control so they match the polarity : (+) to (+) and () to (). Assuming typical TV usage, the batteries last for about one year. Use the correct type of batteries. Batteries that look similar may differ in voltage. Always replace both batteries at the same time. Do not expose the batteries to heat or a flame.
OPERATION RANGE OF THE REMOTE CONTROL
The remote control can be used up to approximately 23 feet/7 meters in a straight line. It can also be operated at a horizontal angle of up to 30° from the remote control sensor.

HW-C700-C770S-C770BS-XAC_0616.in11 11

POWER

INPUT SELECT TV SOURCE

AMP/TV

DIMMER

BD/DVD

1 23

4 56

NEO : 6

SLEEP

7 89

PROLOGIC AUDIO ASSIGN

DSP

MUTE

VOL

TUNING

/CH

ASC

TUNER MEMORY SUBWOOFER

MO/ST

SETUP/MENU

INFO

RETURN

EXIT

BD/DVD

SAT

MULTI CH

VCR / AUX

iPod

Downloaded from thelostmanual.org

11
2010-06-17 10:07:04

Description
TOUR OF THE REMOTE CONTROL

POWER

INPUT SELECT

TV SOURCE

1 17

AMP/TV

DIMMER

BD/DVD

1 23

4 56

NEO : 6

SLEEP

7 89

PROLOGIC AUDIO ASSIGN

DSP

MUTE

VOL

TUNING

/CH

ASC

TUNER MEMORY SUBWOOFER

MO/ST

SETUP/MENU

RETURN

INFO

EXIT

BD/DVD

SAT

MULTI CH

VCR / AUX

iPod

12
HW-C700-C770S-C770BS-XAC_0616.in12 12

Downloaded from thelostmanual.org

2010-06-17 10:07:05

ENG

DESCRIPTION

1 POWER BUTTON 2 AMP/TV BUTTON 3 NUMBER BUTTONS

Turns the receiver on/off.
Used to select the AMP/TV mode. - If you select the AMP mode, the button will flash orange. - If you select the TV mode, the button will flash green.
Used to select a TV channel.

4 NEO : 6 BUTTON

Select the desired NEO:6 mode.

5 PROLOGIC BUTTON

Select the desired Dolby Pro Logic audio mode.

6 SKIP BUTTONS

Press to skip backwards or forwards on a connected DVD/BD player or iPod.

7 STOP/PLAY BUTTON

Press to stop/start playback on a connected DVD/BD player or iPod.

8 MUTE BUTTON

Mutes the sound of a connected device.

9 VOLUME CONTROL BUTTONS Adjusts the volume of the selected device.

10 SUBWOOFER BUTTON

Used to select the Subwoofer.

11 TUNER MEMORY BUTTON Used to set a preset radio frequency.

12 SETUP/MENU BUTTON

Displays the SETUP menu.

13 UP/DOWN/LEFT/RIGHT BUTTONS Used to navigate the menus.

14 RETURN BUTTON

FUNCTION SELECTOR BUTTONS

INPUT SELECT,
16
TV SOURCE BUTTON

17 DIMMER BUTTON

18 BD/DVD BUTTON

19 SLEEP BUTTON 20 AUDIO ASSIGN BUTTON 21 DSP BUTTON 22 SEARCH BUTTON

Used to return to the previous menu from the SETUP menu.
Used to select an input source. Toggles to find and select an input source. Press to select a connected TV's video source. Adjusts the brightness of the display. Used to select the BD/DVD mode. - If you select the BD mode, the button will flash orange. - If you select the DVD mode, the button will flash green. Used to set the Sleep Timer.
Toggles to select an input mode for the selected source.
Used to select the SFE mode.
Press to search backwards or forwards.

23 PAUSE BUTTON

Pauses playback on a connected device.

24 TUNING/CHANNEL BUTTONS Used to change the radio broadcasting frequency or TV channel.

25 ASC BUTTON

Used to set the Auto Sound Calibration function.

26 MO/ST BUTTON

Select MONO or STEREO for radio broadcasts.

27 INFO BUTTON

Display information on the connected device currently being used.

28 ENTER BUTTON

Used to select an item in the SETUP menu.

29 EXIT BUTTON

Exits the SETUP menu.

HW-C700-C770S-C770BS-XAC_0616.in13 13

Downloaded from thelostmanual.org

13
2010-06-17 10:07:05

Connections

This section involves various methods of connecting the AV receiver to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord.

SPEAKER POSITIONING
There are two methods for positioning the speakers. When using Dolby Pro Logic IIz, place the Surround Back Speakers in the FHL, FHR position and connect them to SURROUND BACK/ FRONT HEIGHT Jack. * The HW-C700/C700B model does not supply speakers (sold separately).

FHL

FHR

6.6~9.8 feet (2~3m) AV RECEIVER

SBL

SBR

L, R, C, SW, SL, SR, SBL, SBR ( Dolby Pro Logic IIx ) L, R, C, SW, SL, SR, FHL, FHR( Dolby Pro Logic IIz)

Position of AV Receiver
Place the AV Receiver on a dedicated stand or rack.
Subwoofer
The position of the subwoofer is not so critical. Place it anywhere you like.
Subwoofer function (HW-C770S/C770BS only)
Active subwoofer with integrated 150W amplifier provides rich bass sound. · Connect the SW OUT terminal of the amplifier to the INPUT
terminal of the subwoofer speaker. · Press the POWER button on the rear side of the subwoofer to
turn the power on. · Using the subwoofer's VOLUME control, you can set the desired
bass level (See page 36 "Setting the speaker level" to set the subwoofer level in the menu).

Front Speakers
Place these speakers in front of your listening position, facing inwards (about 45°) toward you. Place the speakers so that their tweeters will be at the same height as your ears. Align the front face of the front speakers with the front face of the center speaker or place them slightly in front of the center speaker. 14

HW-C700-C770S-C770BS-XAC_0616.in14 14

Downloaded from thelostmanual.org

2010-06-17 10:07:05

ENG

CONNECTIONS

Center speaker
It is best to install it at the same height as the front speakers. You can also install it directly over or under the TV.
Surround Speakers
Place these speakers behind your listening position. If there isn't enough room, place these speakers so they face each other. Place them about 2 to 3 feet (60 to 90cm) above your ears, facing slightly downward. Unlike the front and center speakers, the surround speakers are used to handle mainly sound effects and sound will not come from them all the time.
Surround Back Speakers SBL SBR
If you are using two rear center speakers, place them behind the listening position. Place the surround back speaker about 2.3-3.3 feet (70 cm to 1 m).When you
Front Height Speakers FHL FHR (Using Dolby Pro Logic IIz)
When using Dolby Pro Logic IIz, place the Surround Back Speakers on the FHL, FHR position above the front L and front R speakers at least 3.3 feet(1 m) above each one.
- Using the Surround Back Speakers as Front Height Speakers 1. Fasten 2 screws(not supplied) for each speaker on the wall
above the front L and R speakers. 2. Install the Surround Back Speakers (L, R) by fitting the holes
on the back the Surround Back Speakers to the screws on the wall.

M When you attach the speakers to the wall, make sure to fasten them tightly so they do not fall off.

Speaker Configuration

For the best surround-sound experience, you should connect seven speakers and a powered subwoofer. The following table shows which channels you should use based on the number of speakers you have.

2 speakers 3 speakers 4 speakers

5 speakers

6 speakers

7 speakers (DPL IIx)

7 speakers (DPL IIz)

SBL

FHL

SBR

FHR

M No matter how many speakers you use, a powered subwoofer is recommended for powerful and solid bass. If you place a speaker near your TV set, screen colour may be distorted because of the magnetic field
generated by the speaker. If this occurs, place the speaker away from your TV set. 15

HW-C700-C770S-C770BS-XAC_0616.in15 15

Downloaded from thelostmanual.org

2010-06-17 10:07:06

Connections

CONNECTING THE SPEAKERS
FRONT (R) SURROUND(R) SURROUNDBACK(R) PS-FC770S PS-RC770S PS-BC770S

SURROUNDBACK(L) SURROUND(L) FRONT (L) PS-BC770S PS-RC770S PS-FC770S

ACTIVE SUBWOOFER (BUILT-IN POWER AMPLIFIER)
PS-AW730

CENTER PS-CC770S

Model HW-C700/C700B AV Receiver
Model HW-C770S/C770BS AV Receiver FRONT SPEAKER CENTER SPEAKER SURROUND SPEAKER SURROUND BACK SPEAKER ACTIVE SUBWOOFER

HW-C700/C700B
HW-C770S/C770BS PS-FC770S PS-CC770S PS-RC770S PS-BC770S PS-AW730

M One Active Subwoofer is provided, if you would like to use another, purchase it from the retailer where you bought
the player and connect it to the other SUBWOOFER OUT Jack. When using Dolby Pro Logic IIz, connect the Surround Back Speakers (FHL, FHR) to SURROUND BACK/FRONT
HEIGHT Jack.
Connecting Speaker Wire
1. Loosen the knob by turning counterclockwise.
2. Insert the bare part of the wire into the hole in the side of each terminal.
3. Tighten the knob by turning clockwise to secure the wire.

M Keep the subwoofer speaker out of reach of children to prevent them from inserting their hands or objects
into the duct (hole). Never touch speaker terminals while the power is on. Doing so could result in electric shock. Make sure the polarities (+ and -) are correct.

Connecting the Speakers

1. Press down the terminal tab on the back of the speaker.

2. Insert the black wire into the black terminal () and the red wire into

the red (+) terminal, and then release the tab.

Black

Red

3. Connect the connecting plugs to the back of the AV Receiver. · Make sure the colors of the speaker terminals on the back of the AV receiver match the colors of the connecting plugs.
16

HW-C700-C770S-C770BS-XAC_0616.in16 16

Downloaded from thelostmanual.org

2010-06-17 10:07:09

ENG

CONNECTIONS

CONNECTING EXTERNAL DEVICES/YOUR TV VIA HDMI
HDMI is a digital standard interface for connection to such devices as a TV, projector, DVD player, Blu-ray player, set-top box and more. HDMI removes any loss of signal from analog conversion, enabling you to enjoy video and audio sound quality as it was originally created in the digital source. By connecting through the HDMI(High-Definition Multimedia Interface) interface, you can play back digital video and audio.

DVD or

SAT

Blu-ray Player (Cable/Satellite/Set-top box)

Game console or HDTV Tuner
(HDTV Terrestrial Receiver)

Camcorder

· Connect it if you want to use Anynet+.

OPTICAL OUT

High-bandwidth Digital Content Protection System (HDCP) support To play digital contents through the HDMI connection, both the connected external device and TV must support High-bandwidth Digital Content Protection System (HDCP). This product supports HDCP.

Compatibility with a TV Supporting HDMI A TV with an HDMI jack. A TV with a DVI-D jack (TV supporting HDCP) A TV with a DVI-D jack (TV not supporting HDCP)

Video/Audio Video -

M Audio from SACD discs will not be heard with this connection. To play a DVD disc whose copyright is protected
by CPPM, use a player supporting CPPM. The quality of the audio output through the HDMI jack (sampling frequency and bit rate) may be limited by the
performance of the connected device. Since HDMI connection supports both video and audio, you don't have to connect an additional audio cable.

HW-C700-C770S-C770BS-XAC_0616.in17 17

Downloaded from thelostmanual.org

2010-06-17 10:07:14

Connections
HDMI FUNCTION
Using Anynet+(HDMI-CEC)
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control. Anynet + can be used by connecting this AV Receiver to a SAMSUNG TV using an HDMI Cable. This is only available with SAMSUNG TVs and SAMSUNG AV Products that support Anynet+. 1. Connect the AV receiver to a Samsung TV with an HDMI cable. (See page 17) 2. Set the Anynet+ function on your TV.
(See the TV instructions manual for more information.) · You can operate the volume on the AV receiver by using Volume buttons on the TV remote
control.
To turn on Anynet+
1. Press the SETUP/MENU button. · Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF.
2. Press the ENTER button to select SETUP ENTER. 3. Press the buttons to select HDMI SETUP, and then press the ENTER or button. 4. Press the buttons to select HDMI ANYNET+, and then press the ENTER or button. 5. Press the buttons to set ANYNET+ to ON.
- To exit setup mode· Press the SETUP/MENU button.
SETUP OFF appears on the display and Setup Mode is exited.
M If you use an HDMI cable to connect a Samsung TV to your AV Receiver, you can operate the AV receiver using
the TV's remote control. This function is available only in connection with Samsung TV and DVD player supporting Anynet +(HDMI-CEC). Please check your TV for the n logo. If your TV has an n logo, then it supports the Anynet+ function. When you are making Anynet+ connection, do not connect more than two AV receivers (Anynet+ installed). Otherwise, it can cause a malfunction.

18
HW-C700-C770S-C770BS-XAC_0616.in18 18

Downloaded from thelostmanual.org

2010-06-17 10:07:19

ENG

CONNECTING TO YOUR TV

CONNECTIONS

COMPONENT VIDEO

OPTICAL OUT

AUDIO OUT

Video Connection
If your television is equipped with Component Video inputs, connect a Component video cable(not supplied) from the Component Video Output (PR, PB and Y) jacks on the back of your AV Receiver to the Component Video Input jacks on your TV. OR Connect the Video cable from the VIDEO OUT (MONITOR) jack on the back of your AV Receiver to the Video Input jack on your TV.
Audio Connection
Connect the Digital Input (OPTICAL 3) on your AV Receiver to the Digital Output of the TV. OR Connect AUDIO IN (TV) on your AV Receiver to the Audio Out of the TV.

HW-C700-C770S-C770BS-XAC_0616.in19 19

Downloaded from thelostmanual.org

19
2010-06-17 10:07:19

Connections
CONNECTING A DVD OR BD(Blu-ray) PLAYER

COMPONENT VIDEO

COMPONENT OPTICAL AUDIO

OUT

VIDEO OUT

DVD or BD Player

Video Connection
Connect a Component video cable(not supplied) from the COMPONENT IN (BD/DVD) (PR, PB and Y) jacks on the back of your AV Receiver to the Component Video Output jacks on your DVD/BD player. OR Connect a Video cable from the VIDEO IN (BD/DVD) jack on the back of your AV Receiver to the Video Output jack on your DVD/BD player.
Audio Connection
Connect the Digital Input (OPTICAL 1) on your AV Receiver to the Digital Output of the DVD/BD player. OR Connect AUDIO IN (BD/DVD) on your AV Receiver to the Audio Out of the DVD/BD player.

20
HW-C700-C770S-C770BS-XAC_0616.in20 20

Downloaded from thelostmanual.org

2010-06-17 10:07:22

ENG

CONNECTING A CABLE, SATELLITE OR SET-TOP BOX

COMPONENT VIDEO

CONNECTIONS

COMPONENT OPTICAL AUDIO

OUT

VIDEO OUT

SAT(Cable/Satellite/Set-top box)

Video Connection
Connect a Component video cable(not supplied) from the COMPONENT IN (SAT) (PR, PB and Y) jacks on the back of your AV Receiver to the Component Video Output jacks on your SAT. OR Connect a Video cable from the VIDEO IN (SAT) jack on the back of your AV Receiver to the Video Output jack on your SAT.
Audio Connection
Connect the Digital Input (OPTICAL 2) on your AV Receiver to the Digital Output of the SAT. OR Connect AUDIO IN (SAT) on your AV Receiver to the Audio Out of the SAT.

M Disconnect the power plug from the outlet if you will not use this unit for a long period of time. If the cable/set-top box has only one audio output jack, connect it to either the right or left audio input jack of the main unit. Connect the audio cable's red plug to the red jack and white cable to the white jack.

HW-C700-C770S-C770BS-XAC_0616.in21 21

Downloaded from thelostmanual.org

2010-06-17 10:07:26

Connections
CONNECTING A VCR VCR

AUDIO OUT

VIDEO OUT

VIDEO IN

AUDIO IN

VIDEO IN

(For playback) (For recording)

Video Connection
For playback Connect a Video cable from the VIDEO IN (VCR) jack on the back of your AV Receiver to the Video Output jack on your VCR. For recording Connect a Video cable from the VIDEO OUT (VCR) jack on the back of your AV Receiver to the Video Input jack on your VCR.
Audio Connection
For playback Connect AUDIO IN (VCR) on your AV Receiver to the Audio Out of the VCR. For recording Connect AUDIO OUT (VCR) on your AV Receiver to the Audio In of the VCR.
M Disconnect the power plug from the outlet if you will not use this unit for a long period of time.
22

HW-C700-C770S-C770BS-XAC_0616.in22 22

Downloaded from thelostmanual.org

2010-06-17 10:07:29

ENG

CONNECTIONS

CONNECTING A CD PLAYER CD player

COAXIAL OUT

AUDIO OUT

Audio Connection
Connect the Digital Input (COAXIAL) on your AV Receiver to the Digital Output of the CD Player. OR Connect AUDIO IN (CD) on your AV Receiver to the Audio Out of the CD player.
M If the CD player has only one audio output jack, connect it to either the right or left audio input jack of the main
unit. Connect the audio cable's red plug to the red jack and white cable to the white jack.

HW-C700-C770S-C770BS-XAC_0616.in23 23

Downloaded from thelostmanual.org

23
2010-06-17 10:07:33

Connections
CONNECTING 7.1 CHANNEL DEVICES
You can connect the AV receiver to a DVD player, SUPER AUDIO CD player or other device with 7.1 channel output.

C SW

FRONT

SURROUND
5.1 CH 7.1 CH

SUB CENTER WOOFER

SURROUND BACK

7.1 Channel device

24
HW-C700-C770S-C770BS-XAC_0616.in24 24

Downloaded from thelostmanual.org

2010-06-17 10:07:38

ENG

CONNECTING AN iPod
You can listen to audio from an iPod through the main unit. For iPod operation with your receiver, see this page and 48 ~ 49.

CONNECTIONS

iPOD

1. Connect the iPod dock connector to the iPod jack on your reciever. 2. Place the iPod in the Dock.
· If you want to play a movie stored in your iPod player, you should set the player's TV Out option to On before inserting it into the dock. See page 49.
3. Press the iPod button on the remote control. · You can also use the INPUT SELECT button on the main unit. The mode switches as follows : FM BD/DVD SAT TV VCR CD AUX 7.1 MULTI CH IPOD AUDIO IPOD VIDEO
Disconnecting an iPod
Follow the steps below to prevent damage to an iPod and data when disconnecting from your AV receiver.
1. Press the INPUT SELECT button on the main unit to switch to a mode other than IPOD AUDIO or IPOD VIDEO.
OR 1. Turn off the AV Receiver. 2. Disconnect the iPod player from the iPod dock, or remove the iPod dock connector from the AV
receiver.
M You must have the VIDEO (Monitor or VCR) output connected to your TV to view iPod video. See page 22. Adjust the volume to a moderate level before you connect your iPod and AV Receiver. When the unit is powered on and you connect an iPod, the unit will charge your iPod's battery. Make sure to connect the dock connector so that the label "SAMSUNG" faces upward. "Made for iPod" means that an electronic accessory has been designed to connect specifically to an iPod and has been certified by the developer to meet Apple performance standards. "Works with iPhone" means that an electronic accessory has been designed to connect specifically to an iPhone and has been certified by the developer to meet Apple performance standards.

HW-C700-C770S-C770BS-XAC_0616.in25 25

Downloaded from thelostmanual.org

2010-06-17 10:07:42

Connections
CONNECTING AN iPod (Continued) iPod models that are compatible with HW-C700/C700B/C770S/C770BS

M "Made for iPod" means that the dock has been designed to connect specifically for the iPod and has been certified by the
developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
iPod is a trademark of Apple Inc., registered in the U.S. and other countries. iPhone is a trademark of Apple Inc.

26
HW-C700-C770S-C770BS-XAC_0616.in26 26

Downloaded from thelostmanual.org

2010-06-17 10:07:47

ENG

CONNECTIONS

CONNECTING THE FM ANTENNA
1. Connect the FM antenna supplied to the FM ANTENNA terminal as a temporary measure. 2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or
other rigid surface.
FM antenna (supplied)
M Do not place the antenna cable close to the power cord. Keep it as far away as possible.
If you experience poor FM reception, use an external antenna.
CONNECTING AUX COMPONENTS
You can connect external devices you use for a short time (camcorder, game console, mobile equipment,etc.) to the front of this unit for convenience.

VIDEO OUT

AUDIO OUT

Camcorder

HW-C700-C770S-C770BS-XAC_0616.in27 27

Downloaded from thelostmanual.org

27
2010-06-17 10:07:47

Basic functions of your AV Receiver

BEFORE USING THE AV RECEIVER

Turning On/Off
Connect the power plug to the outlet. Press the POWER button on the main unit for 2 seconds. · This unit will be turned on or set to Standby mode. · You can also turn the unit on/off by pressing the POWER button on the remote control.
Remote control functions
You can operate your AMP (this AV receiver)/ TV and BD(Samsung only)/DVD player with this remote control. See pages 52 ~ 53 for more details.

To select a function
Method 1 Press the INPUT SELECT button. · Each time you press this button, FM BD/DVD SAT TV VCR CD AUX
7.1 MULTI CH IPOD AUDIO IPOD VIDEO will be selected in turn.
Method 2 Press the TUNING/CH, BD/DVD, SAT, TV, CD, MULTI CH, VCR/AUX or iPod button. · You can directly select the desired function.

AUDIO SETUP

Selecting a source device and connection jack

Select the external devices you have connected to the receiver.

1. Press the SETUP/MENU button.

· Each time the button is pressed, the mode switches

between SETUP ENTER and SETUP OFF.

2. Press the ENTER button to select SETUP ENTER.

3. Press the buttons to select AUDIO SETUP, and then press the ENTER or button.

4. Press the buttons to select a desired jack. · Devices switch as follows; BD/DVD, SAT, TV, CD

- To exit setup mode · Press the SETUP/MENU button.
SETUP OFF appears on the display and Setup Mode is exited.

M You can also use the SETUP, ,,.,<, >, ENTER buttons on the front of your AV Receiver.

28
HW-C700-C770S-C770BS-XAC_0616.in28 28

Downloaded from thelostmanual.org

2010-06-17 10:07:56

ENG

BASIC FUNCTIONS OF YOUR AV RECEIVER

SELECTING DIGITAL/ANALOG INPUT
You can listen to sound in 2 channel analog , Dolby Digital or DTS using this unit.
1. Press the INPUT SELECT button to select a desired function (BD/DVD, SAT,TV, CD, AUX). See page 28.
2. Press the AUDIO ASSIGN button on the remote control to select the external device you have connected. · Each time you press this button, the input mode changes as follows:

· For BD/DVD function

· For SAT function

· For TV function

· For CD function
Ä

· For AUX function
Ä

POWER

INPUT SELECT TV SOURCE

AMP/TV

DIMMER

BD/DVD

1 23 4 56

M You can also change the input mode by pressing the AUDIO ASSIGN button on the front of your AV Receiver.
You can enjoy Dolby Digital or DTS if you connect the digital audio output jack of an external audio component to the optical or coaxial digital audio input jack on the main unit.

HW-C700-C770S-C770BS-XAC_0616.in29 29

Downloaded from thelostmanual.org

29
2010-06-17 10:07:56

Setup
For your convenience, you can set this AV receiver's features for the best use. SETUP MENU TREE
Here's a quick look at how the setup menus are organized on your AV Receiver.

AUDIO SETUP

BD/DVD

SAT

OPT 1,2,3 OPT 1,2,3 OPT 1,2,3 OPT 1,2,3

COAX COAX COAX COAX

SPK SIZE SPK DISTANCE
SPK LEVEL TEST TONE DPLIIX SETUP DPLIIZ SETUP TONE CONTROL NEO:6 SETUP EX/ES SETUP A/V SYNC MP3 ENHANCER SMART VOLUME ASC SETUP DRC SETUP HDMI SETUP VARIABLE SET

30
HW-C700-C770S-C770BS-XAC_0616.in30 30

Downloaded from thelostmanual.org

2010-06-17 10:07:59

ENG

SETUP

SETUP MENU TREE (Continued)

AUDIO SETUP SPK SIZE
SPK DISTANCE
SPK LEVEL
TEST TONE

FRONT CENTER
SURR SBACK FRONTH SUBW CROVR
F.L F.R CEN S.L S.R SBL/FHL SBR/FHR S.W
F.L F.R CEN S.L S.R SBL/FHL SBR/FHR S.W
AUTO

LARGE

SMALL

LARGE

SMALL

NONE

LARGE

SMALL

NONE

LARGE

SMALL

NONE

LARGE

SMALL

NONE

YES

60Hz, 80Hz, 100Hz, 120Hz, 150Hz, 180Hz, 200Hz

1 ~ 30 FT (1 foot steps) , default : 10 FT

-10 ~ +10dB (1dB step) , default : 00dB MANUAL

DPLIIX SETUP DPLIIZ SETUP TONE CONTROL NEO:6 SETUP EX/ES SETUP A/V SYNC MP3 ENHANCER SMART VOLUME ASC SETUP DRC SETUP HDMI SETUP VARIABLE SET

M If Dolby Pro Logic IIz is set to On, the Surround Back speaker (SBL/SBR) is changed
to the Front Height Speaker (FHL/FHR).
31

HW-C700-C770S-C770BS-XAC_0616.in31 31

Downloaded from thelostmanual.org

2010-06-17 10:07:59

Setup
SETUP MENU TREE (Continued)

AUDIO SETUP SPK SIZE
SPK DISTANCE SPK LEVEL TEST TONE
DPLIIX SETUP
DPLIIZ SETUP
TONE CONTROL
NEO:6 SETUP
EX/ES SETUP A/V SYNC
MP3 ENHANCER SMART VOLUME ASC SETUP DRC SETUP
HDMI SETUP VARIABLE SET

PANORAMA DIMENSION C- WIDTH
HEIGHT
TONE BASS TREBLE
C-IMAGE

OFF

-7 ~ 0 ~ +7

0~7

OFF

-6dB ~ +6dB (1dB Step)

0~5

AUTO

OFF

32
HW-C700-C770S-C770BS-XAC_0616.in32 32

Downloaded from thelostmanual.org

2010-06-17 10:08:00

ENG

SETUP

SETUP MENU TREE (Continued)

AUDIO SETUP SPK SIZE
SPK DISTANCE SPK LEVEL TEST TONE
DPLIIX SETUP DPLIIZ SETUP TONE CONTROL NEO:6 SETUP EX/ES SETUP
A/V SYNC

SYNC OFF ~ SYNC 240MS (10MS Step)

MP3 ENHANCER

OFF

SMART VOLUME

OFF

ASC SETUP DRC SETUP

START

EQ ON / EQ OFF

MAX

STD

MIN

HDMI SETUP VARIABLE SET

SYNC AUDIO ANYNET+
OFF

OFF

AVR

OFF

HW-C700-C770S-C770BS-XAC_0616.in33 33

Downloaded from thelostmanual.org

33
2010-06-17 10:08:00

Setup

SETTING THE SPEAKER SIZE

Signal outputs and frequency response from the speaker will be adjusted according to your speaker configuration and whether certain speakers are used or not.

1. Press the SETUP/MENU button.

· Each time the button is pressed, the mode switches between SETUP

ENTER and SETUP OFF.

2. Press the ENTER button to select SETUP ENTER.

3. Press the buttons to select SPK SIZE, and then press the ENTER or button.

4. Press the buttons to select the speaker you want, and then press the

ENTER or button.

· Each time you press the buttons, FRONTÆCENTER Æ SURR Æ

SBACK Æ FRONTH Æ SUBW Æ CROVR will be selected in turn.

5. Press the buttons to set the mode (LARGE, SMALL etc.) for the selected speaker.

6. Repeat steps 3-5 to set the mode for each speaker.

- To exit setup mode · Press the SETUP/MENU button.
SETUP OFF appears on the display and Setup Mode is exited.

Setting the Speaker SPEAKER
FRONT (Front) CENTER (Center) SURR (Surround) SBACK (Surround Back) FRONTH (Front Height) SUBW (Subwoofer) CROVR (Crossover Frequency)

Possible Settings

Default Setting

LARGE, SMALL

SMALL

LARGE, SMALL, NONE

SMALL

LARGE, SMALL, NONE

SMALL

LARGE, SMALL, NONE

SMALL

LARGE, SMALL, NONE

NONE

YES, NO

YES

60, 80, 100,120, 150, 180, 200(Hz) 100Hz

· LARGE : Select when using large speakers. You can listen to full range sound. · SMALL : Select this when using small speakers. · NONE : Select when no speaker is used. · YES (subwoofer) : Select when using the subwoofer speaker. · NO (subwoofer) : Select when not using the subwoofer speaker. · CROVR : Select the crossover frequency for the best bass response in your room.

M You can also use the SETUP, ,,., <, >, ENTER buttons on the front of your AV Receiver.
When the Front speaker is only set to LARGE, you can select LARGE of other speakers. When the Surround speaker is only set to LARGE, you can select LARGE of SBACK (Surround Back)
speaker.

34
HW-C700-C770S-C770BS-XAC_0616.in34 34

Downloaded from thelostmanual.org

2010-06-17 10:08:00

ENG

SETUP

SETTING THE SPEAKER LISTENING DISTANCE

If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the center and surround speakers.

1. Press the SETUP/MENU button.

· Each time the button is pressed, the mode switches between SETUP

ENTER and SETUP OFF.

2. Press the ENTER button to select SETUP ENTER.

3. Press the buttons to select SPK DISTANCE, and then press the ENTER or button.

4. Press the buttons to select the speaker you want, and then press

the ENTER or button.

· Each time you press the buttons, F.L Æ F.RÆ CEN Æ S.L Æ S.R

Æ SBL Æ SBR Æ S.W will be selected in turn.

5. Press the buttons to set the Speaker Distance.

· For the FRONT LEFT, FRONT RIGHT, CENTER, SURR. LEFT,

SURR. RIGHT, SURRBACK.LEFT, SURRBACK.RIGHT and

SUBWOOFER Speakers, you can set the distance from the speaker to

listening position between 1ft ~ 30ft (0.3~9.0m) in intervals of 1ft (0.3m).

- To exit setup mode · Press the SETUP/MENU button.
SETUP OFF appears on the display and Setup Mode is exited.

- Setting Speaker Distance Set the distance from the speaker to listening position in intervals of 1ft(0.3m).

· F.L (front left) : 1ft ~ 30ft

· SW (subwoofer) : 1ft ~ 30ft

· F.R (front right) : 1ft ~ 30ft

· SBL (surround back left) : 1ft ~ 30ft

· S.L (surround left) : 1ft ~ 30ft

· SBR (surround back right) : 1ft ~ 30ft

· S.R (surround right) : 1ft ~ 30ft

· FHL (front height left) : 1ft ~ 30ft

· CEN (center) : 1ft ~ 30ft

· FHR (front height right) : 1ft ~ 30ft

M If the listening position is beyond the range of the speaker distance setup, set the speaker distance to the
maximum.
The distance range of the overall speaker system is determined based on the F.L(front left) speaker distance from the listening position.
If Dolby Pro Logic IIz is set to On, the Surround Back speaker (SBL/SBR) is changed to the Front Height Speaker (FHL/FHR).

HW-C700-C770S-C770BS-XAC_0616.in35 35

Downloaded from thelostmanual.org

35
2010-06-17 10:08:00

Setup

SETTING THE SPEAKER LEVEL

You can set the balance and level of speakers.

1. Press the SETUP/MENU button.

· Each time the button is pressed, the mode switches between SETUP

ENTER and SETUP OFF.

2. Press the ENTER button to select SETUP ENTER.

3. Press the buttons to select SPK LEVEL, and then press the ENTER

or button.

4. Press the buttons to select the speaker you want, and then press

the ENTER or button.

· Each time you press this button, F.L Æ F.RÆ CEN Æ S.L Æ S.R Æ

SBL Æ SBR Æ S.W will be selected in turn.

5. Press the buttons to set the Speaker Level mode.

· You can adjust it from -10 to +10dB in 1 step increments.

· The sound gets quieter at -10dB and louder at +10dB.

- To exit setup mode -
· Press the SETUP/MENU button. SETUP OFF appears on the display and Setup Mode is exited.

- Setting Speaker Level · F.L (front left) : -10 ~ +10dB · F.R (front right) : -10 ~ +10dB · S.L (surround left) : -10 ~ +10dB · S.R (surround right) : -10 ~ +10dB · CEN (center) : -10 ~ +10dB

· SW (subwoofer) : -10 ~ +10dB · SBL (surround back left) : -10 ~ +10dB · SBR (surround back right) : -10 ~ +10dB · FHL (front height left) : -10 ~ +10dB · FHR (front height right) : -10 ~ +10dB

M If Dolby Pro Logic IIz is set to On, the Surround Back speaker (SBL/SBR) is changed to the Front Height
Speaker (FHL/FHR).

36
HW-C700-C770S-C770BS-XAC_0616.in36 36

Downloaded from thelostmanual.org

2010-06-17 10:08:00

ENG

SETUP

SETTING THE TEST TONE

Use the test tone to check the speaker connection status or level.

1. Press the SETUP/MENU button.

· Each time the button is pressed, the mode switches between SETUP

ENTER and SETUP OFF.

2. Press the ENTER button to select SETUP ENTER.

3. Press the buttons to select TEST TONE, and then press the ENTER

or button.

4. Press the buttons to select the option you want, and then press the

ENTER or button.

· AUTO : Test signal will be automatically output as follows; F.L Æ CEN

Æ S.W Æ F.R Æ S.R Æ SBR Æ SBL Æ S.L.

- During test tone output, press the buttons to adjust the speaker

output level from -10 to +10 dB by 1 step.

· MANUAL : Enables you to adjust the output level of the speaker

manually.

1) Press the ENTER button to select the speaker you want.

Each time you press the ENTER button, F.L Æ CEN Æ S.W Æ F.R

Æ S.R Æ SBR Æ SBLÆ S.L will be selected in turn.

2) Press the buttons to set the Test Tone mode you want. You can adjust the speaker output level from -10 to +10dB by 1 step. The sound gets quieter at -10dB and louder at +10dB.

- Test Tone Output · F.L (front left) : -10 ~ +10dB · F.R (front right) : -10 ~ +10dB · S L (surround left) : -10 ~ +10dB · S.R (surround right) : -10 ~ +10dB

· CEN (center) : -10 ~ +10dB · S.W (subwoofer) : -10 ~ +10dB · SBL (surround back left) : -10 ~ +10dB · SBR (surround back right) : -10 ~ +10dB

- To stop test tone · Press the SETUP/MENU button once.
SETUP OFF appears on the display and test tone stops.

M In the Dolby Pro Logic IIz mode; Test signal will be automatically output as follows : F.L Æ FHL Æ CEN Æ
S.W Æ FHR Æ F.R Æ S.R.

HW-C700-C770S-C770BS-XAC_0616.in37 37

Downloaded from thelostmanual.org

37
2010-06-17 10:08:01

Setup
SETTING DOLBY PRO LOGIC MODE
This mode provides 7.1 channel sound from 2 channel sources. Press the PROLOGIC button on the remote control. · MOVIE : Adds realism to the movie soundtrack. · MUSIC : Provides 7.1 channel surround sound for digital, analog or existing stereo sources. · GAME : Enhances the excitement of the game's sound. · MATRIX : You will hear 7.1 channel surround sound. · PL (Pro Logic) : You will experience a surround effect with 5.1 channel surround sound.

SETTING DOLBY PRO LOGIC IIx

This function works only in Dolby Pro Logic IIx MUSIC mode.
1. Press the SETUP/MENU button. · Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF.

2. Press the ENTER button to select SETUP ENTER.

3. Press the buttons to select DPLIIX SETUP, and then press the

ENTER or button.

4. Press the buttons to select the option you want, and then press the

ENTER or button.

· PANORAMA : You can set it ON or OFF.

(This mode extends the front stereo image to include the surround

speakers for an exciting "wraparound" effect with side wall imaging.)

· DIMENSION : You can set from -7 to +7.

(Incrementally adjusts the sound field (DSP)from the front or surround.)

· C- WIDTH : You can set from 0 to 7.

(This sets the width of the center sound image. The higher the setting,

the less sound comes from the center speaker.)

M PANORAMA, DIMENSION and CENTER WIDTH settings are enabled only if the mode is set to MUSIC.
You cannot use Dolby Pro Logic IIx mode for multi channel signals such as Dolby Digital, Dolly Digital +, Dolby true HD, DTS, DTS-HD Master Audio.
Pro Logic works only for PCM audio signals with sampling frequencies of 32KHz, 44KHz or 48KHz. When Dolby Pro Logic IIz is set ON, Dolby Pro Logic IIx can not be used.

38
HW-C700-C770S-C770BS-XAC_0616.in38 38

Downloaded from thelostmanual.org

2010-06-17 10:08:01

ENG

SETUP

SETTING DOLBY PRO LOGIC IIz

Dolby Pro Logic IIz adds front height channels to surround sound.

1. Press the SETUP/MENU button. · Each time the button is pressed, the mode switches between SETUP

ENTER and SETUP OFF.

2. Press the ENTER button to select SETUP ENTER.

3. Press the buttons to select DPLIIZ SETUP, and then press the ENTER or button.

4. Press the buttons. · Each time you press this button, HEIGHT OFF Æ HEIGHT ON will be selected in turn.

M If Dolby Pro Logic IIz is set to On, the Surround Back speaker in the speaker size mode is changed to NONE,
the Front Height Speaker will be turned on. If Dolby Pro Logic IIz is set to OFF, the surround back speaker and front height speaker can't be turned to default setting.
If you change Dolby Pro Logic IIz mode to Dolby Pro Logic IIx mode, first Dolby Pro Logic IIz will be turned off, second FRONTH in the speaker size mode will be turned off, lastly the Surround Back Speaker will be turned on. If you turn Dolby Pro Logic IIz on, FRONTH in the speaker size mode and the Surround Back Speaker can not be changed to NONE.

SETTING TONE CONTROL

This will enable you to adjust the bass and treble level.

1. Press the SETUP/MENU button.

· Each time the button is pressed, the mode switches between SETUP

ENTER and SETUP OFF.

2. Press the ENTER button to select SETUP ENTER.

3. Press the buttons to select TONE CONTROL, and then press the ENTER or button.

4. Press the buttons to select the option you want, and then press the ENTER or button.

· Each time you press this button, TONE Æ BASS Æ TREBLE will be

selected in turn.

5. Press the buttons to set the Tone Control mode you want. · If it is set to TONE OFF, the Tone Control function will be disabled. · You can adjust it from -6 to +6dB by 1 step. · The sound gets quieter at -6dB and louder at +6dB.

- To exit setup mode · Press the SETUP/MENU button.
SETUP OFF appears on the display and Setup Mode is exited.

M The Tone Control function can be applied to all channels except for the subwoofer.

HW-C700-C770S-C770BS-XAC_0616.in39 39

Downloaded from thelostmanual.org

39
2010-06-17 10:08:01

Setup

SETTING NEO:6 MODE

You can play back 2 channel sound over 6.1 channels when enjoying music or a movie.

1. Press the SETUP/MENU button. · Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF.

2. Press the ENTER button to select SETUP ENTER.

3. Press the buttons to select NEO:6 SETUP, and then press the

ENTER or button.

4. Press the buttons to set the C-IMAGE mode you want.

You can set C-IMAGE from 0 to 5

This parameter adjusts the height of the center image through the front

and center speakers.

"0" is the lowest while "5" is the highest.

- To exit setup mode· Press the SETUP/MENU button.
SETUP OFF appears on the display and Setup Mode is exited.

M NEO:6 mode cannot be used with Dolby Digital, Dolly Digital +, Dolby true HD, DTS, DTS-HD Master Audio.
Pro Logic works only for PCM audio signals with sampling frequencies of 32KHz, 44KHz or 48KHz.

40
HW-C700-C770S-C770BS-XAC_0616.in40 40

Downloaded from thelostmanual.org

2010-06-17 10:08:02

ENG

SETUP

SETTING EX/ES MODE

When surround back speakers are connected, you can listen to 6.1 or 7.1 multi-channel sound using the built-in Dolby Digital Surround EX or DTS ES decoder. This function works when a Dolby Digital or DTS source (such as a DVD player) is input, and does not work with L.PCM and Dolby Digital 2 channel sources.

1. Press the SETUP/MENU button. · Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF.

2. Press the ENTER button to select SETUP ENTER.

3. Press the buttons to select EX/ES SETUP, and then press the ENTER or button.

4. Press the buttons to set the EX/ES mode you want. · AUTO : If the unit receives an audio signal that it can recognize, it will

select an optimal decoder for playback in 6.1/7.1 channels.

If the amplifier does not recognize the audio signal, it will not play in

6.1/7.1 channel automatically.

· ON : Dolby Digital or DTS signal will be played in 6.1 / 7.1 channel using

Dolby Digital Surround EX / DTS ES decoder.

· OFF : Dolby Digital Surround EX / DTS ES decoder will not be used for playback.

- To exit setup mode· Press the SETUP/MENU button. SETUP OFF appears on the display and Setup Mode is exited.

M You cannot use DTS-ES without surround back speakers connected.

HW-C700-C770S-C770BS-XAC_0616.in41 41

Downloaded from thelostmanual.org

41
2010-06-17 10:08:02

Setup

AV SYNC

Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to match the video.

1. Press the SETUP/MENU button.

· Each time the button is pressed, the mode switches between SETUP

ENTER and SETUP OFF.

2. Press the ENTER button to select SETUP ENTER.

3. Press the buttons to select A/V SYNC, and then press the ENTER

or button.

4. Press the buttons to set the A/V Sync mode you want.

· You can adjust it from OFF to 240MS in 10MS steps.

MP3 ENHANCER

This also helps enhance your sound experience (ex. mp3 music). Use this if you want to hear better sound from a low quality mp3 source.

1. Press the SETUP/MENU button.

· Each time the button is pressed, the mode switches between SETUP

ENTER and SETUP OFF. 2. Press the ENTER button to select SETUP ENTER.

3. Press the buttons to select MP3 ENHANCER, and then press the

ENTER or button.

4. Press the buttons to select ON or OFF.

SMART VOLUME

This will regulate and stabilize the volume level against a drastic volume change when changing channels or during a scene transition.

1. Press the SETUP/MENU button.

· Each time the button is pressed, the mode switches between SETUP

ENTER and SETUP OFF.

2. Press the ENTER button to select SETUP ENTER.

3. Press the buttons to select SMART VOLUME, and then press the

ENTER or button.

4. Press the buttons to select ON or OFF.

42
HW-C700-C770S-C770BS-XAC_0616.in42 42

Downloaded from thelostmanual.org

2010-06-17 10:08:02

ENG

SETUP

ASC (AUTO SOUND CALIBRATION) SETUP
By setting the ASC function just once when you relocate or install the unit, you can have the unit automatically recognize the distance between speakers, levels between channels, and frequency characteristics to create a 7.1-channel sound field optimized for your environment.
- Before Setting 1. Plug the ASC microphone into the ASC MIC jack. 2. Place the ASC microphone at the listening position. 3. Press the ASC button on the front panel, and then press the ENTER button.

1. Press the SETUP/MENU button. · Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF.

2. Press the ENTER button to select SETUP ENTER.

3. Press the buttons to select ASC SETUP, and then press the ENTER or button.

4. Press the buttons to select ASC START, and then press the

ENTER button.

· To create the optimal 7.1 channel sound field, the selections are in the

following sequence:

L C R SR SBR SBL SL SW · EQ ON : The ASC(Auto Sound Calibration) EQ mode is set to on.
EQ OFF: The ASC(Auto Sound Calibration) EQ mode is set to off.

5. If you see a ASC READY message on the screen, press the ENTER button to apply the measurement value. And then unplug the ASC microphone.

ASC Microphone

To cancel the ASC (Auto Sound Calibration) setup. This will be automatically reverted if you press the RETERN button. * If ASC error occurs, see "ASC Error List" on page 56.
M Setting the ASC function takes about 3 minutes.
Because the volume level of the tone is fixed during the ASC setup, you cannot adjust the volume using the volume control. If the ASC microphone is disconnected during the ASC setup, the setup will be canceled. You can also press the ASC button on the remote control to use this function. If Dolby Pro Logic IIz is set to ON, the selection are in the following sequence : FL Æ CEN Æ FR Æ SR Æ SL Æ SW.
43

HW-C700-C770S-C770BS-XAC_0616.in43 43

Downloaded from thelostmanual.org

2010-06-17 10:08:03

Setup

DRC SETUP

You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.DRC

compresses the audio to make the loudest sounds quieter and the quietest sounds louder.

1. Press the SETUP/MENU button.

· Each time the button is pressed, the mode switches between SETUP

ENTER and SETUP OFF.

2. Press the ENTER button to select SETUP ENTER.

3. Press the buttons to select DRC SETUP, and then press the

ENTER or button.

4. Press the buttons to set the DRC Setup mode you want.

· STD : Sets DRC effect to standard. ·MAX : Sets DRC effect to maximum.

· MIN : Sets DRC effect to minimum.

HDMI SETUP

Use this if you want to receive audio from HDMI connected external devices. 1. Press the SETUP/MENU button.
· Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. 2. Press the ENTER button to select SETUP ENTER. 3. Press the buttons to select HDMI SETUP, and then press the ENTER or button. 4. Press the buttons to select the option you want, and then press the ENTER or button.

5. Press the buttons to set the HDMI Setup mode you want.

· HDMI AUDIO : AVR(Audio Video Receiver), TV This preference determines whether audio received at the HDMI IN is output by the HDMI OUT. If you want to listen to audio from an HDMI connected external device through your HDMI connected TV's speakers, set it to TV. Otherwise, leave it on AVR to listen to audio from the A/V receiver.

- AVR : HDMI audio is not output

- TV : HDMI audio is output

· HDMI ANYNET+ : ON, OFF Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control.

- ON : Anynet+ is enabled.

- OFF : Anynet+ is disabled.

· HDMI SYNC : ON, OFF The AV receiver can be set to automatically correct any delay between the video and the audio, based on the data from the connected TV.

- ON : HDMI Sync is enabled.

- OFF : HDMI Sync is disabled.

M HDMI Audio is enabled only if both the HDMI INPUT and HDMI OUT are connected properly and working normally. This function works only if your HDMI-compatible TV supports HDMI Sync.

VARIABLE SET (Low Power Consumption SETUP)
This function enhances electric power efficiency. 1. Press the SETUP/MENU button.
· Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. 2. Press the ENTER button to select SETUP ENTER. 3. Press the buttons to select VARIABLE SET, and then press the ENTER or button. 4. Press the buttons to select ON or OFF.
· ON :This is Samsung's electric power efficiency function, you can save about 30 % for power consumption. · OFF: Normal power efficiency function.
M This function is not available after the Tone Control, Speaker Level, SFE mode or ASC is changed from the factory setting.

HW-C700-C770S-C770BS-XAC_0616.in44 44

Downloaded from thelostmanual.org

2010-06-17 10:08:04

ENG

OPERATION

Operation
USING THE SURROUND MODES
Using the SOUND EFFECT button on the front of the main unit
Selecting the DPLIIx mode 1. Press the SOUND EFFECT button to select DPLIIX.
· Each time you press this button, DPLIIX Æ NEO:6 Æ SFE will be selected in turn. 2. Press the UP/DOWN ( ,,. ) button.
· Each time you press the UP/DOWN ( ,,. ) button, MUSIC Æ GAME Æ MATRIX Æ PL Æ MOVIE will be selected in turn.
· You can also select the DPLIIx mode by pressing the PROLOGIC button on the remote control.
Selecting the NEO:6 mode 1. Press the SOUND EFFECT button briefly to select NEO:6.
· Each time you press this button, DPLIIX Æ NEO:6 Æ SFE will be selected in turn. 2. Press the UP/DOWN ( ,,. ) button.
· Each time you press the UP/DOWN ( ,,. ) button, MUSIC Æ CINEMA will be selected in turn. · You can also select the NEO:6 mode by pressing the NEO : 6 button on the remote control.
Selecting the SFE mode 1. Press the SOUND EFFECT button to select SFE.
· Each time you press this button, DPLIIX Æ NEO:6 Æ SFE will be selected in turn. 2. Press the UP/DOWN ( ,,. ) button.
· Each time you press the UP/DOWN ( ,,. ) button, STEREO Æ HALL 1Æ HALL 2 Æ J.CLUB Æ CHURCH Æ ROCK Æ CLASSIC Æ LIVE Æ GAME Æ MOVIE Æ CONCERT Æ STADIUM will be selected in turn.
· You can also select the SFE mode by pressing the DSP button on the remote control.
M You cannot use Dolby Pro Logic IIx mode for multi channel signals such as Dolby Digital and DTS.
Pro Logic works only for BITSTREAM audio signals with sampling frequencies of 32KHz, 44KHz or 48KHz.
If you turn Dolby Pro Logic IIz on, the Dolby Pro Logic IIx mode is only available MOVIE.
Using the S.DIRECT/STEREO button on the front of the main unit
Press the S.DIRECT/STEREO button. · Each time the button is pressed, the mode switches between the S. DIRECT mode and the STEREO
mode. · S.DIRECT : Outputs 2 CH PCM audio signal without any signal processing, providing higher audio
quality. This is useful for obtaining the best sound from a connected CD player. · STEREO : Outputs sound of the selected source in 2 CH stereo.

HW-C700-C770S-C770BS-XAC_0616.in45 45

Downloaded from thelostmanual.org

45
2010-06-17 10:08:04

Operation

USING THE SURROUND MODES (Continued)

Surround Mode and Input Signal Chart o = active, = inactive

Surround Mode
DOLBY
NEO:6 SFE EX/ES
STEREO True-HD Dolby Digital + DTS-HD

Input Signal
Dolby D Surr. EX Dolby D (5.1ch) Dolby D Surr.EX Dolby D(5.1ch) Dolby D (2ch) Dolby D (2ch Surr) L.PCM (Audio)
Analog L.PCM (Audio)
Analog Dolby D (2ch) Dolby D (2ch Surr) Dolby D (2ch) Dolby D (2ch Surr) L.PCM (Audio)
Analog Dolby D Surr. EX Dolby D (5.1ch)
DTS-ES DTS (5.1ch) Dolby D (2ch) Dolby D (2ch Surr) L.PCM (Audio) L.PCM 96KHz
Analog True-HD Dolby Digital + Master Audio High Resolution

Decoding L/R

Dolby Digital 5.1 O

Pro Logic IIz O

Pro Logic IIx(z) O

Neo:6

DD+SFE

SFE

Dolby Digital EX O

DTS-ES

Stereo

True-HD

Dolby Digital +

Master Audio O

High Resolution O

Output Channel

Display Information

SL SR

SBL SBR

SUBW

Display Signal Format

Channel Status

OO O O

DIGITAL L, C, R, SL, SR, SBL, SBR, SW

OO O

DIGITAL

L, C, R, SL, SR, SW

OO O O

DIGITAL L, C, R, SL, SR, SBL, SBR, SW

OO O O

DIGITAL L, C, R, SL, SR, SBL, SBR, SW

OO O O

DIGITAL L, C, R, SL, SR, SBL, SBR, SW

OO O O

DIGITAL L, C, R, SL, SR, SBL, SBR, SW

OO O O

L.PCM L, C, R, SL, SR, SBL, SBR, SW

OO O O

Analog L, C, R, SL, SR, SBL, SBR, SW

OO O O

L.PCM L, C, R, SL, SR, SBL, SBR, SW

OO O O

Analog L, C, R, SL, SR, SBL, SBR, SW

OO O O

DIGITAL L, C, R, SL, SR, SBL, SBR, SW

OO O O

DIGITAL L, C, R, SL, SR, SBL, SBR, SW

OO O

DIGITAL L, C, R, SL, SR, SBL, SBR, SW

OO O

DIGITAL L, C, R, SL, SR, SBL, SBR, SW

OO O

L.PCM L, C, R, SL, SR, SBL, SBR, SW

OO O

Analog L, C, R, SL, SR, SBL, SBR, SW

OO O O

DIGITAL L, C, R, SL, SR, SBL, SBR, SW

OO O O

DIGITAL L, C, R, SL, SR, SBL, SBR, SW

OO O O

dts, ES L, C, R, SL, SR, SBL, SBR, SW

OO O O

dts

L, C, R, SL, SR, SBL, SBR, SW

DIGITAL

L, R, SW

DIGITAL

L, R, SW

L.PCM

L, R, SW

L.PCM

L, R, SW

Analog

L, R, SW

OO O O

True-HD L, C, R, SL, SR, SBL, SBR, SW

OO O O

Dolby Digital +

L, C, R, SL, SR, SBL, SBR, SW

OO O O

DTS-HD L, C, R, SL, SR, SBL, SBR, SW

OO O O

DTS-HD L, C, R, SL, SR, SBL, SBR, SW

· L/R : front speaker (left/right) C : center speaker SL/SR : surround speaker (left/right) SBL/SBR : surround back speaker (left/right) SW : subwoofer

M Channel status displays are dependent on the speaker configuration. SFE mode works with 2-ch signals. If Dolby Pro Logic IIz is set to On, the Surround Back speaker(SBL/SBR) is changed to the Front Height Speaker(FHL/FHR), Dolby true HD, Dolby plus, DTS-HD Master Audio ,SFE and NE0:6 will be output 5.1 channel.

USING THE SUBWOOFER SELECTION BUTTON
You can set the subwoofer to on/off. Press the SUBWOOFER button.
46

HW-C700-C770S-C770BS-XAC_0616.in46 46

Downloaded from thelostmanual.org

2010-06-17 10:08:04

ENG

OPERATION

LISTENING TO THE RADIO
You can listen to the radio by using either automatic or manual tuning.
1. Press the INPUT SELECT button to select FM.
2. Select a frequency (radio broadcast). · Preset tuning : Press the #,$ buttons on the remote control to select the preset frequency. · Manual tuning 1 (Automatic tuning): Press and hold the TUNING/CH ( .,, ) buttons on the remote control to automatically tune in a frequency. · Manual tuning 2 : Press the TUNING/CH ( .,, ) buttons on the remote control to increase or decrease the frequency step by step.
M You can also use the SELECT (.,,) button on the main uint to change the radio frequency.
To Listen in mono/stereo Press the MO/ST button on the remote control. · Each time you press this button, STEREO or MONO will be selected in turn. · If you select MONO in an area with weak reception, it will help to reduce noise. · This function works only with the remote control.

Presetting radio stations

You can preset up to 30 FM stations.

E.g.: Setting station FM 89.10 in preset 2.

1. Press the INPUT SELECT button to select FM.

2. Press the TUNING/CH ( .,, ) buttons on the remote control

to select 89.10.

· Refer to step 2 above to tune in automatically and manually.

3. Press the MEMORY button on the main unit. · You can also use the TUNER MEMORY button on the

remote control.

· Tuner number will blink on the display.

4. Press the TUNING/CH ( .,, ) buttons on the remote control

to select preset 2.

· You can select from presets 1 to 30.

5. Press the MEMORY button on the main unit.

· Tuner number will disappear and station 89.10 will be

saved in preset 2.

6. To preset other stations, repeat steps 2 to 5.

To Listen to Preset Station · Press the TUNING MODE button to select PRESET and press the SELECT ( .,, ) buttons.

HW-C700-C770S-C770BS-XAC_0616.in47 47

Downloaded from thelostmanual.org

47
2010-06-17 10:08:04

Operation
USING AN iPod
You can enjoy playback of your iPod using the supplied remote control.
Listening to Music (iPod audio function)
You can play music files stored in the iPod player by connecting it to the AV receiver.
1. Connect the iPod dock connector to the iPod jack on the AV Receiver.
2. Place the iPod in the dock. · Your iPod is automatically turned on.
3. Press the INPUT SELECT button on the remote control to select IPOD AUDIO mode.
4. Press the PLAY button on the remote control to play. · The AV receiver starts playing from the first track of the iPod player.
5. You can use the remote control to control simple playback functions such as the PLAY, PAUSE, STOP, SKIP (#,$) buttons.
M See page 26 for compatible iPods.
Compatibility depends on the software version of your iPod. You can also select iPod by pressing the iPod button on the remote control.

48
HW-C700-C770S-C770BS-XAC_0616.in48 48

Downloaded from thelostmanual.org

2010-06-17 10:08:05

ENG

OPERATION

USING AN iPod (Continued)
Watching a Movie (iPod Video function)
You can play video files stored in the iPod player on a TV by connecting it to the AV receiver.
1. Connect the iPod dock connector to the iPod jack on the AV receiver.
2. In the iPod screen, move to Videos > Settings and set the TV Out option to On.
3. Place the iPod in the dock. 4. Press the INPUT SELECT button on the remote control to select
IPOD VIDEO mode. 5. Set the AV IN option of the TV connected to the AV receiver to
COMPOSITE.
Follow the iPod onscreen guide through the following steps. 6. Press the S,T buttons on the remote control to select Videos and
press the ENTER button. 7. Press the S,T buttons on the remote control to select Movies and press
the ENTER button. 8. Press the S,T buttons to select the file to play and press the ENTER
button. · The iPod's video files will be played on the TV screen.
9. You can use the remote control to control simple playback functions such as the PLAY, PAUSE, STOP, SKIP (#,$) buttons. · If you press the PREV button within 3 seconds after the playback, the player will stop playing and return to the list screen. If you press the PREV button 3 seconds or later after the playback, the player will move to the start screen of the current file. · Press the STOP button to stop playing and return to the list screen. · Press the RETURN button to return to the previous menu.

M You must have the VIDEO (Monitor or VCR) output connected to your TV to view iPod video. See page 26 for compatible iPods. Compatibility depends on the software version of your iPod. When the current file is played to the end, the next file will not be played automatically. To play the next file, select a file to play in the list screen of the iPod player. No other screen than the playback one will appear on the TV screen. Check other screens on the iPod player.

HW-C700-C770S-C770BS-XAC_0616.in49 49

Downloaded from thelostmanual.org

49
2010-06-17 10:08:05

Operation
CONVENIENT FUNCTIONS
Sleep timer function
You can set the time that this unit will shut itself off. Press the SLEEP button. · SLEEP : OFF Æ 15 Æ 30 Æ 45 Æ 60 Æ 90 Æ 120 M (MIN) will be
selected in turn.

4 56

NEO : 6

SLEEP

7 89

PROLOGIC AUDIO ASSIGN

DSP

To check sleep timer Press the SLEEP button. · The remaining time before this unit will shut itself off is shown on the display. · Pressing the button again changes the sleep time from what you set previously.
To cancel sleep timer · Press the SLEEP button until SLEEP OFF appears on the display.

Mute function
This function is useful when answering a doorbell or telephone call. Press the MUTE button. · MUTE appears on the display.
To output sound again Press the MUTE button again. · MUTE will disappear and sound will output.

MUTE
TUNING VOL
/CH
ASC

Adjust the display
You can adjust the brightness of the display.
Press the DIMMER button. · Each time you press this button, the brightness changes as follows :
Dark Æ Bright.

POWER

INPUT SELECT TV SOURCE

AMP/TV

DIMMER

BD/DVD

1 23

M SLEEP, Mute and the Adjust Display functions can only be operated with the remote control.

50
HW-C700-C770S-C770BS-XAC_0616.in50 50

Downloaded from thelostmanual.org

2010-06-17 10:08:05

ENG

OPERATION

Reset function
When the Power is on, 1. Press the MUTE button.
· MUTE appears on the display. 2. Press the 9 button five times and then press the ENTER button.
· INITIAL : NO appears on the display. 3. Press the buttons to select YES.
· The unit will turn off after 5 seconds.
When the Power is Off, 1. Press and hold the MEMORY button on the front of your AV Receiver
for longer than 5 seconds. · POWER LED will blink one time.
M Using the RESET function will erase all stored settings.
Do not use this unless necessary.

NEO : 6

SLEEP

7 89

PROLOGIC AUDIO ASSIGN

DSP

0MUTE

VOL

TUNING

/CH

ASC

TUNER MEMORY SUBWOOFER

MO/ST POPUP

SETUP/MENU

INFO

RETURN

EXIT

Using headphones
Use headphones (not supplied) for private listening pleasure. Connect the headphones to the headphone (PHONES) jack and listen to music.

M Do not turn the volume up too high when you use headphones as it may damage your hearing.

SOFTWARE UPGRADE
Samsung may offer upgrades for AV Receiver's firmware in the future.
Please visit Samsung.com or contact the Samsung call centre to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port located on your AV Receiver.
M Insert a USB drive containing the firmware upgrade into the USB port
on the back of the main unit. Please be careful to not disconnect the power or remove the USB
drive while upgrades are being applied. The main unit will turn off automatically after completing the firmware upgrade. When software is upgraded, settings you have made will return to their default (factory) settings. We recommend you write down your settings so that you can easily reset them after the upgrade. If you failed software upgrade, it is strongly recommended whole USB data format to FAT16 and retry software upgrade. The NTFS USB File System can not be supported. Depending on the manufacturer, the USB may not be supported.
51

HW-C700-C770S-C770BS-XAC_0616.in51 51

Downloaded from thelostmanual.org

2010-06-17 10:08:06

Miscellaneous
OPERATING YOUR TV WITH THE REMOTE CONTROL
1. Press the POWER button to turn on the TV. 2. Press the AMP/TV button to set the remote to TV mode. 3. Point the remote control toward the TV. 4. While holding down the POWER button, enter the code corresponding to your brand of TV.
· If there is more than one code listed for your TV in the table, enter one at a time to determine which code works.
· If the code matches the TV's code, the TV will be turned off. 5. If TV is turned on or off when you press the POWER button of the remote control, the setting is completed.
· You can use the TV POWER, VOLUME, CHANNEL, MENU and Numeric buttons (0~9).
M The remote control may not work on some brands of TVs. Also, some operations may not be possible
depending on your brand of TV. The remote control will work with Samsung TVs by default.

52
HW-C700-C770S-C770BS-XAC_0616.in52 52

Downloaded from thelostmanual.org

2010-06-17 10:08:08

ENG

MISCELLANEOUS

OPERATING YOUR TV WITH THE REMOTE CONTROL (Continued)

TV Brand Code List

Brand Admiral (M.Wards) A Mark Anam
AOC Bell & Howell (M.Wards) Brocsonic Candle Cetronic Citizen CINEMA Classic Concerto Contec Coronado Craig
Croslex Crown CURTIS MATHES CXC Daewoo
Daytron Dynasty Emerson
Fisher Funai Futuretech General Electric (GE)
Hall Mark Hitachi Inkel JC Penny JVC KTV
KEC KMC LG (Goldstar)

Code Number 056, 057, 058 001, 015 001, 002, 003, 004,005, 006, 007, 008, 009, 010, 011, 012, 013, 014
001, 018, 040, 048 057, 058, 081
059, 060 018 003 003, 018, 025 097 003 018 046 015 003, 005, 061, 082, 083, 084 062 003 059, 061, 063 003 002, 003, 004, 015,016, 017, 018, 019, 020, 021, 022, 023, 024, 025, 026, 027, 028, 029, 030, 032, 034, 035, 036, 040, 048, 059, 090, 099, 100 040 003 003, 015, 040, 046, 059, 061, 064, 082, 083, 084, 085
019, 065, 103 003 003 006, 040, 056, 059, 066, 067, 068 040 015, 018, 050, 059, 069 045 056, 059, 067, 086 070 059, 061, 087, 088
003, 015, 040 015 001, 015, 016, 017, 037, 038, 039, 040, 041, 042, 043, 044, 054, 086

Brand Luxman LXI (Sears)
Magnavox
Marantz Matsui
MGA Mitsubishi/MGA
MTC NEC
Nikei Onking Onwa Panasonic
Penney Philco
Philips
Pioneer Portland Proton QUASAR Radio Shack
RCA/Proscan
Realistic Sampo Samsung
Sanyo
Scott Sears Sharp
Signature 2000 (M.Wards) Sony
Soundesign Spectricon SSS

Code Number 018 019, 054, 056, 059, 060, 062, 063, 065, 071 015, 017, 018, 048, 054, 059, 060, 062, 072, 089
040, 054 054
018, 040 018, 040, 054, 059, 060, 075, 101 018 018, 019, 020, 040, 059, 060 003 003 003 006, 007, 008, 009, 054, 066, 067, 073, 074 018 003, 015, 017, 018, 048, 054, 059, 062, 069, 090 015, 017, 018, 040, 048 054, 062, 072, 112, 114, 117, 118 063, 066, 080, 091 015, 018, 059 040 006, 066, 067
017, 048, 056, 060, 061, 075 018, 059, 067, 076, 077, 078, 092, 093, 094 003, 019 040 000, 015, 016, 017, 040, 043, 046, 047, 048, 049, 054, 059, 060, 098 019, 061, 065, 101, 102, 103, 104 003, 040, 060, 061 015, 018, 019 015, 057, 064, 101, 105, 106, 115 057, 058
050, 051, 052, 053, 055, 101 003, 040 001 018

Brand Sylvania
Symphonic Tatung Techwood
Teknika TMK
Toshiba
Vidtech Videch Wards
Yamaha York Yupiteru Zenith Zonda Dongyang LOWE FINLUX YOKO LOEWE OPTA PHONOLA
RADIOLA SCHNEIDER AKAI GRUNDIG
BLAUPUNKT SIEMENS CGE IMPERIAL MIVAR SABA BANG&OLUFSEN BRIONVEGA
FORMENTI METZ WEGA RADIOMARELLI SINGER SINUDYNE TELEFUNKEN

Code Number 018, 040, 048, 054, 059,
060, 062 061, 095, 096 006 018
003, 015, 018, 025 018, 040
019, 057, 063, 071, 101
107, 109, 110, 111, 113 018 059, 060, 069 015, 017, 018, 040, 048,
054, 060, 064 018 040 003 058, 079 001
003, 054 054 054, 109, 114
054 054, 114 054, 112, 114
054, 112 054 103 108, 109, 113, 119, 120,
121
108
108 113
113 113 114 114 114
114 114
114 114 114 114
116

HW-C700-C770S-C770BS-XAC_0616.in53 53

Downloaded from thelostmanual.org

53
2010-06-17 10:08:08

Miscellaneous
OPERATING YOUR DVD OR BD PLAYER WITH THE REMOTE CONTROL
1. Press the POWER button to turn on the DVD (BD) player. 2. Press the BD/DVD button on the remote control to set the remote to DVD (BD) mode. 3. Point the remote control toward the DVD (BD). 4. While holding down POWER button, enter the code corresponding to your brand of DVD (BD).
· If there is more than one code listed for your DVD (BD) in the table, enter one at a time to determine which code works.
· If the code matches the DVD (BD)'s code, the DVD (BD) will be turned off. 5. If DVD (BD) is turned on or off when you press the POWER button of the remote controller, the setting is
completed. · You can use DVD (BD) POWER, PLAY, PAUSE, STOP, SKIP, MENU and Numeric buttons (0~9).
M The remote control may not work on some brands of DVD.
Also, some operations may not be possible depending on your brand of DVD. The remote control will work with Samsung DVD (BD) by default.

DVD Brand Code List

Brand

Code Number

DENON

003, 032

DOONOON

019

DMTECH

017

FISHER

002

006

HARMAN/KARDON 012

JVC

010, 013

KENWOOD

008

001

MAGNAVOX

004

MITSUBISHI

005, 016

Brand ONKYO OPTIMUS PANASONIC PROSCAN PHILIPS PIONEER RCA SAMSUNG SANYO SONY THETA DIGITAL

Code Number 004, 014 011 021 006 004, 023 007, 011, 022, 025 006 000, 027 002 015, 020 011

Brand TOSHIBA YAMAHA ZENITH TAEGWANG PS2 X-BOX APEX Marantz

Code Number 004, 018 009, 033 004, 024 026 028 029 030 031

BD player Brand Code List

SAMSUNG

Brand

000, 001, 002, 003, 004

M The remote control will control Samsung BD players only.

Code Number

54
HW-C700-C770S-C770BS-XAC_0616.in54 54

Downloaded from thelostmanual.org

2010-06-17 10:08:08

ENG

TROUBLESHOOTING

Troubleshooting
Before requesting service, please check the following.

Symptom

Check

Remedy

The unit will not turn on.

· Is the power cord plugged into the outlet?

A function does not work

· Is there static electricity in the air?

when the button is pressed.

Sound is not produced.

· Are the speakers and external components connected properly?
· Is the Mute function on?
· Is the volume set to minimum?
· Is the Speaker Size set incorrectly to NONE?

Picture does not appear on a · Is the external component connected

TV when the function is

properly?

selected.

Remote controller does not work.

· Are the batteries drained?
· Is the distance between remote control and main unit too great?

The sound from the left/right channels is reversed.

· Are the left/right speaker or left/right input/output cables connected properly?

Can't receive radio broadcasts.

· Is FM antenna connected properly?

There is no sound from surround speakers.
There is no sound from surround back speakers

· Are the surround speakers connected properly?
· Is SURR (surround) incorrectly set to NONE in the Speaker Size?
· Is surround mode set to stereo?
· Are the surround back speakers connected properly?
· Is SBACK (Surround Back) set to NONE in the Speaker Size?
· Is Surround Mode set to EX/ES?

Can't select EX/ES mode.

· Is SBACK (Surround Back) set to NONE in the Speaker Size?
· Is the input signal selected properly?

· Connect the power plug to the outlet.
· Disconnect the power plug and connect it again.
· Connect them correctly. · Press the MUTE button to cancel the
function. · Adjust the volume. · Refer to pages 34 to select LARGE,
SMALL or YES. · Connect it correctly.
· Replace with new batteries. · Operate at close distance.
· Check the left/right channel and connect it/them correctly.
· Connect the antenna correctly. · If the input strength of antenna signal
is weak, install the FM antenna in a place with good reception. · Refer to pages 14 ~16 to connect them properly. · Refer to page 34 to select LARGE or SMALL. · Refer to pages 45~46 to select proper Surround Mode. · Refer to pages 14 ~16 to connect them properly. · Refer to page 34 to select LARGE or SMALL. · Refer to page 41 to set Surround Mode to EX/ES. · Refer to page 34 to select LARGE or SMALL. · Use a 7.1 channel external component.

HW-C700-C770S-C770BS-XAC_0616.in55 55

Downloaded from thelostmanual.org

55
2010-06-17 10:08:08

Troubleshooting

Symptom Can't select Dolby Pro Logic IIx mode.
Can't select NEO:6 mode. There is no sound when playing a DTS encoded DVD.

Check

Remedy

· Is the input signal selected properly?

· Only 2 channel signal can select Dolby Pro Logic IIx mode. (ex:Dolby Digital, PCM, 2 channel analog input signal.)

· Is the input signal selected properly? · Use PCM and Analog input signal.

· Is Digital input selected?

· Check whether the DVD player is properly connected and refer to page 29 to select the digital input.

Product protection function

Heat protection
· The protection function will come on if the main unit or power transformer overheats.

" will appear in the display .

This function will come on : - If speaker terminal is shorted - If speaker cable is shorted
If there is no problem when you turn the unit on again after turning it off, PROTECTION mark will disappear on the display and the unit will work properly.

M If PROTECTION appears on the display, check whether the speaker terminal is shorted and then turn on
the unit again.

ASC Error List

Error No. E01 E02 E03 E04 E05 E07 E08
E13
E14
56

VFD Message HP CONCT
NO MIC NOISY MIC LEVL NO FRONT LEVL OVR DIST OVR
TIME OVR
CODE ERR

Action
Disconnect the headphones.
Connect the microphone.
Take an appropriate action to reduce the surrounding noise. The speaker is too close to the microphone. Check the distance between speaker and microphone. Check if the front speaker is connected properly.
Check the position of each of speaker and microphone. The distance between speaker and microphone exceeds the acceptable value. Check the location of microphone and each speaker. Unplug the power cable and plug it back. Then, perform ASC again. Unplug the power cable and plug it back. Then, perform ASC again.

HW-C700-C770S-C770BS-XAC_0616.in56 56

Downloaded from thelostmanual.org

2010-06-17 10:08:08

ENG

APPENDIX

Appendix

SPECIFICATIONS

Weight

GENERAL

Dimensions (W x H x D) Operating temperature range

Operating humidity range

Frequency response

Usable sensitivity

FM TUNER

S/N ratio Distortion

Stereo separation

Tuner output level

Rated output

Front speaker (left+right)

Center speaker

Surround speaker (left+right)

AMPLIFIER Surround back speaker (left+right)

Subwoofer speaker

Input sensitivity/impedance

S/N ratio (analog input)

Separation (1kHz)

FREQUENCY Analog input RESPONSE Digital input/96kHz PCM

Input HDMI
Output

TV format

Input level/impedance

VIDEO OUTPUT Output level/impedance

Video frequency response

S/N Ratio

13.7 Ibs 17.2 x 6.6 x 14.7 inches 41°F~+95°F 10%~75% 87.5~108.0MHz 12dBf MONO/STEREO 55/55dB MONO/STEREO 0.3/0.8% 30dB 1kHz, 75kHz Dev 20Hz~20kHz/THD = 0.9% 6 120W/CH 6 120W/CH 6 120W/CH 6 120W/CH 8 150W/CH 450mV/47k 80dB 60dB 20Hz~20kHz(±3dB) 20Hz ~44kHz(±3dB) Compatible 1080p Compatible 1080p NTSC/PAL 1Vp-p/75 1Vp-p/75 5Hz to 10kHz(-3dB) 60dB

* S/N Ratio, Distortion, Separation and Usable sensitivity are based on measurement using AES (Audio Engineering Society) guidelines.
- Samsung Electronics Co., Ltd reserves the right to change the specifications without notice. - Weight and dimensions are approximate. - Design and specifications are subject to change without prior notice. - For the power supply and Power Consumption, refer to the label attached to the product.

HW-C700-C770S-C770BS-XAC_0616.in57 57

Downloaded from thelostmanual.org

57
2010-06-17 10:08:08

LIMITED WARRANTY TO ORIGINAL PURCHASER

Samsung Electronics Canada Inc.(SECA), warrants that this product is free from defective material and workmanship.

SECA further warrants that if this product falls to operate properly within the specified warranty period and the failure is due to improper workmanship or defective materials, SECA will repair or replace the product at its option.

All warranty repairs must be performed by a SECA Authorized Service Center. (The name and address of the location nearest you can be obtained by calling toll free: 1- 800- SAMSUNG)

LABOR One year (Carry- in)

PARTS One year

On carry-in models, transportation to and from the service center is the customer's responsibility.
The original dated sales receipt must be retained by the customer and is the only acceptable proof of purchase. It must be presented to the authorized service center at the time service is requested.

EXCLUSIONS (WHAT IS NOT COVERED)

This warranty does not cover damage due to accident, fire, flood and/ or other acts of God; misuse, incorrect line voltage, improper installation, improper or unauthorized repairs, commercial use or damage that occurs in shipping. Exterior and interior finish, lamps, glass are not covered under this warranty. Customer adjustments which are explained in the instruction manual are not covered under the terms of this warranty. This warranty will automatically be voided for any unit found with a missing or altered serial number. This warranty is valid only on products purchased and used in Canada.

HEADQUARTERS SAMSUNG ELECTRONICS CANADA INC.,
CUSTOMER SERVICE 55 STANDISH COURT MISSISSAUGA, ONTARIO L5R 4B2 CANADA
FABRIQUE EN CORÉE 1-800-SAMSUNG (1-800-7267864)
WWW.SAMSUNG.COM/CA

HW-C700-C770S-C770BS-XAC_0616.in58 58

Downloaded from thelostmanual.org

2010-06-17 10:08:09

Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Area

Contact Center

Web Site

` North America

Canada

1-800-SAMSUNG (726-7864) www.samsung.com

Mexico

01-800-SAMSUNG (726-7864) www.samsung.com

U.S.A

1-800-SAMSUNG (726-7864) www.samsung.com

` Latin America

Argentine

0800-333-3733

www.samsung.com

Brazil

0800-124-421 4004-0000

www.samsung.com

Chile

800-SAMSUNG (726-7864) www.samsung.com

Nicaragua

00-1800-5077267

www.samsung.com

Honduras

800-7919267

www.samsung.com

Costa Rica 0-800-507-7267

www.samsung.com

Ecuador

1-800-10-7267

www.samsung.com

El Salvador 800-6225

www.samsung.com

Guatemala 1-800-299-0013

www.samsung.com

Jamaica

1-800-234-7267

www.samsung.com

Panama

800-7267

www.samsung.com

Puerto Rico 1-800-682-3180

www.samsung.com

Rep. Dominica 1-800-751-2676

www.samsung.com

Trinidad & Tobago

1-800-SAMSUNG (726-7864) www.samsung.com

Venezuela

0-800-100-5303

www.samsung.com

Colombia

01-8000112112

www.samsung.com

` Europe

Austria

0810 - SAMSUNG (7267864, 0.07/min)

www.samsung.com

Belgium

02-201-24-18

www.samsung.com/ be (Dutch) www.samsung.com/ be_fr (French)

Czech

800 - SAMSUNG (800-726786)

www.samsung.com

Denmark

70 70 19 70

www.samsung.com

Finland

030 - 6227 515

www.samsung.com

France

01 48 63 00 00

www.samsung.com

Germany

01805 - SAMSUNG (726-7864 0,14/Min)

www.samsung.com

Hungary

06-80-SAMSUNG (726-7864) www.samsung.com

Italia

800-SAMSUNG (726-7864) www.samsung.com

Luxemburg 261 03 710

www.samsung.com

Netherlands

0900-SAMSUNG (0900-7267864) ( 0,10/Min)

www.samsung.com

Norway

815-56 480

www.samsung.com

Poland

0 801 1SAMSUNG (172678) 022-607-93-33

www.samsung.com

Portugal

80820-SAMSUNG (726-7864) www.samsung.com

Slovakia

0800-SAMSUNG (726-7864) www.samsung.com

Spain

902 - 1 - SAMSUNG (902 172 678)

www.samsung.com

Sweden

0771 726 7864 (SAMSUNG) www.samsung.com

U.K

0845 SAMSUNG (7267864) www.samsung.com

Eire

0818 717100

www.samsung.com

Area

Contact Center

Web Site

Switzerland

0848 - SAMSUNG (7267864, CHF 0.08/min)

www.samsung.com/ch www.samsung.com/ ch_fr/ (French)

Lithuania

8-800-77777

www.samsung.com

Latvia

8000-7267

www.samsung.com

Estonia

800-7267

www.samsung.com

` CIS

Russia

8-800-555-55-55

www.samsung.com

Georgia

8-800-555-555

Armenia

0-800-05-555

Azerbaijan 088-55-55-555

Kazakhstan 8-10-800-500-55-500

Uzbekistan 8-10-800-500-55-500

www.samsung.com

Kyrgyzstan 00-800-500-55-500

www.samsung.com

Tadjikistan 8-10-800-500-55-500

www.samsung.com

Ukraine

0-800-502-000

www.samsung.ua www.samsung.com/ ua_ru

Belarus

810-800-500-55-500

Moldova

00-800-500-55-500

` Asia Pacific

Australia

1300 362 603

www.samsung.com

New Zealand 0800 SAMSUNG (0800 726 786) www.samsung.com

China

400-810-5858 010-6475 1880

www.samsung.com

Hong Kong (852) 3698-4698

www.samsung.com/ hk www.samsung.com/ hk_en/

3030 8282

India

1800 110011 1800 3000 8282

1800 266 8282

www.samsung.com

Indonesia

0800-112-8888 021-5699-7777

www.samsung.com

Japan

0120-327-527

www.samsung.com

Malaysia

1800-88-9999

www.samsung.com

Philippines

1-800-10-SAMSUNG (726-7864) 1-800-3-SAMSUNG (726-7864) 1-800-8-SAMSUNG (726-7864) 02-5805777

www.samsung.com

Singapore

1800-SAMSUNG (726-7864) www.samsung.com

Thailand

1800-29-3232 02-689-3232

www.samsung.com

Taiwan

0800-329-999

www.samsung.com

Vietnam

1 800 588 889

www.samsung.com

` Middle East & Africa

Turkey

444 77 11

www.samsung.com

South Africa 0860-SAMSUNG (726-7864) www.samsung.com

U.A.E

800-SAMSUNG (726-7864) www.samsung.com

Bahrain

8000-4726

Jordan

800-22273

HW-C700-C770S-C770BS-XAC_0616.in59 59

Downloaded from thelostmanual.org

2010-06-17 10:08:09

HW-C700-C770S-C770BS-XAC_0616.in60 60

Downloaded from thelostmanual.org

Code No. AH68-02260S
2010-06-17 10:08:09

References

PScript5.dll Version 5.2 4-Heights™ PDF Library 3.4.0.6904 (http://www -tools.com)