GLOBO LIGHTING 48449-50 Ceiling Lamp
Installation and Operation Guide
Assembly Instructions
Follow these steps to safely install your GLOBO LIGHTING ceiling lamp.
- Mounting Bracket: Securely attach the mounting bracket to the ceiling using the provided screws. (Refer to Diagram B, Step 1)
- Electrical Connection: Connect the electrical wires according to local regulations and the diagram. (Refer to Diagram B, Step 2)
- Attach Fixture: Connect the main light fixture to the mounting bracket. (Refer to Diagram B, Step 3)
- Secure Fixture: Ensure the fixture is firmly secured to the bracket. (Refer to Diagram B, Step 4)
The fixture includes an indicator for its OFF state. (Refer to Diagram A)
Product Features
- ? Memory Function: Saves your last setting.
- ??? 3 Light Steps: Offers distinct brightness levels.
- ? Many Light Steps: Provides a wider range of brightness adjustments.
- ? Colour Fixing: Allows selection of specific color temperatures.
- ? Night Light Function: Provides a low-level illumination.
- ? Dimmable: Brightness can be adjusted.
- Adjustable Color Temperature: Supports 2700K (Warm White), 4000K (Neutral White), and 6000K (Cool White).
Remote Control Operation
The included remote control allows for comprehensive management of the lamp's functions:
Main Controls:
- ON/OFF: Powers the lamp on or off.
- LM ↑ (Brightness Up): Increases the brightness.
- LM ↓ (Brightness Down): Decreases the brightness.
- CCT Selection:
- 2700K: Sets warm white light.
- 4000K: Sets neutral white light.
- 6000K: Sets cool white light.
- Night Light: Activates the low-level night light mode.
Remote Control Reset:
To reset the remote control and re-pair it with the lamp, follow these steps:
- Turn the lamp OFF using the main power switch.
- Wait for at least 5 seconds.
- Turn the lamp ON using the main power switch.
- Within 3 seconds of turning the lamp ON, press and hold the ON button on the remote control for approximately 3 seconds until the lamp flashes. (Refer to Remote Control Diagram, "Reset remote control" section)
The remote control supports multiple light steps, cycling through different brightness and color temperature settings.
Technical Specifications
Parameter | Value |
---|---|
Frequency Bandwidth | 2527MHz |
Maximal Radiation Transmitting Power | 3.12dBm |
Manufacturer Information
GLOBO Handels GmbH
Gewerbestrasse 3
A-9184 Sankt Peter
AUSTRIA
CE Certification Mark