ERKUL Skyport Roof Rail Installation for Toyota RAV-4 (2013-2019)

Step 1: Prepare the Vehicle

Ensure the roof of your Toyota RAV-4 is clean and dry. Locate the pre-drilled mounting points on the roof rails.

Step 2: Attach Mounts (Part A)

Position the roof rail mounts (Part A) onto the designated areas on the vehicle's roof rails. Use the M8x30 bolts to secure these mounts. Refer to the diagram for precise placement.

Visual Description: The diagram shows Part A, a metal bracket, being attached to the vehicle's roof rail with M8x30 bolts.

Step 3: Install Front Roof Rails

Align the front roof rail with the attached mounts. Insert the M6x35 bolts through the roof rail and into the mounts. Use the M6 washers and nuts to secure them. Tighten using the provided torque wrench to the specified setting (indicated by '7' in the diagram, suggesting a torque value).

Visual Description: The front section of the roof rail is shown being attached to the vehicle's roof using M6x35 bolts and washers. A torque wrench is depicted, indicating the need for precise tightening.

Step 3: Install Rear Roof Rails

Repeat the process for the rear roof rail, using the M6x25 bolts. Align the rail with the mounts and secure using M6 washers and nuts. Tighten with the torque wrench.

Visual Description: The rear section of the roof rail is shown being attached to the vehicle's roof using M6x25 bolts and washers.

Step 4: Final Tightening and Check

Ensure all bolts are securely tightened according to the torque specifications. Double-check that the roof rails are firmly attached and stable. The diagram shows a final check of the installed roof rails on the front and rear of the vehicle.

Visual Description: Images show the completed installation of the roof rails on both the front and rear of the Toyota RAV-4. Red circles highlight the mounting points.