Owner's Manual for Deaf Bonce models including: AP-M65AN, AP-M67AN, Apocalypse AP-M67AN, MID Range Speaker, Apocalypse AP-M67AN MID Range Speaker, Apocalypse Series
15 giu 2022 — Thank you for purchasing of this Deaf Bonce product! Our company is committed to the creation of extremely loud sound systems with no loss of quality.
The correct choice of amplifier, its settings, filtering and enclosure largely influence on the lifespan of your audio system. You should select an amplifier with a nominal power, not exceeding the nominal power of the speakers.
Apocalypse AP-M67AN | Среднечастотные неодимовые динамики
AP-M65AN
AP-M67AN
Thank you for purchasing of this Deaf Bonce product! Our company is committed to the creation of extremely loud sound systems with no loss of quality.
To ensure proper use, please carefully read through this manual before using this product. It is especially important that you read and observe caution's in this manual. Please keep the manual in a safe and accessible place for future reference.
The correct choice of amplifier, its settings, filtering and enclosure largely influence on the lifespan of your audio system. You should select an amplifier with a nominal power, not exceeding the nominal power of the speakers. Proper coordination of the head unit (HU) with the amplifier will allow to get a clean, undistorted signal applied to the component to prevent overheating and voice coil damage. Recommended settings of the amplifier and HU: Volume of HU should not exceed 80%. The amplifier sensitivity should be set to 50%.
The recommended filter settings: The high pass filter HPF (the filter that cuts all frequencies below those set for the filter) should be set to 150-250 Hz (24 dB/Oct), or 250-350 Hz (12 dB/Oct) The low pass filter LPF (the filter that cuts all frequencies above those set for the filter) should be set to 8-12 kHz (12 dB/Oct) Recommended amplifiers: AAB-1200.2D, AAB-1800.2D, AAP-500.2D, AAP-800.2D, AAP-400.4D.
AP-M65AN/AP-M67AN: HPF - 150-250 Hz (24 dB/Oct) LPF - 8-12 kHz (12 dB/Oct)
AP-M65AN 6.5
Cloth Pressed paper
Aluminum Neodymium
200 400 1.5 CAW 200 - 17 000
AP-M67AN 6.5
Cloth Pressed paper
Aluminum Neodymium
300 600 1.75 CAW 200 - 14 000
4 102.5 121 6.14 0.30 9.12
4 102 125 5.72 0.31 9.3
AP-M65AN AP-M67AN
156 mm / 6.1" 156 mm / 6.1"
Connection of terminals
75.8 mm / 3.0" 67.5 mm / 2.7"
75.8 mm / 3.0" 67.5 mm / 2.7"
171.2 mm / 6.7"
152 mm / 6.0" 171.2 mm / 6.7"
152 mm / 6.0"
Installation
10 /0.4"
10 /0.4"
7.BOX CONTENTS
Deaf Bonce products are warranted against defects concerning materials and their manufacturing under normal functioning conditions.
While the product is under warranty, defective parts will be repaired or replaced at the manufacturer's discretion. The defective product, along with notification about it, must be returned to the dealer from which it was purchased together with the warranty certificate duly filled in, complete with the original packaging. If the product is no longer under warranty, it will be repaired at the current costs.
Our company does not undertake any liability for damages due to transportation. Our company does not take any responsibility for costs or loss of profit due to the impossibility to use the product, other accidental or consequential costs, expenses or damages suffered by the customer. Warranty according to laws in force. For more information visit our website and carefully read warranty card.
The manufacturer reserves the right to change design and specification without prior notice.
AP-M65AN
AP-M67AN
, , . , . () , , , . : 80%. 50%
: HPF (, ) - 150250 (24 /), 250-350 (12 /) LPF (, ) - 8-12 (12 /) : AAB-1200.2D, AAB-1800.2D, AAP-500.2D, AAP-800.2D, AAP-400.4D.
AP-M65AN/AP-M67AN: HPF - 150-250 (24 /) LPF - 8-12 (12 /)
AP-M65AN 6,5
200 400 1,5
200 - 17 000
AP-M67AN 6,5
300 600 1,75
200 - 14 000
4 102,5 121 6,14 0,30 9,12
4 102 125 5,72 0,31 9,3
AP-M65AN AP-M67AN
156 / 6,1" 156 / 6,1"
75,8 / 3,0" 67,5 / 2,7"
75,8 / 3,0" 67,5 / 2,7"
171,2 / 6,7"
152 / 6,0" 171,2 / 6,7"
152 / 6,0"
10 /0,4"
10 /0,4"
7.
AP-M65AN
AP-M67AN
Corel PDF Engine Version 23.5.0.506 CorelDRAW 2021