KAO-5 Switch Wiring Diagrams
This document provides essential wiring diagrams for KAO-5 switches, emphasizing stable and durable performance according to Seikostandard specifications. These diagrams are crucial for correctly connecting the switches in electrical systems.
General Wiring Principles
Wire Identification:
- Red wires represent the fireline (live/hot).
- Blue wires represent the zeroline (neutral/ground).
Model: KAO-5
Applicable Voltage: AC220/380V
Single-Phase 220V Wiring
The diagrams illustrate the proper connection of single-phase 220V power to the KAO-5 switches. Incoming power lines (red fireline and blue zeroline) are connected to the designated terminals on the switches. Outgoing lines are then routed from the switches to the connected load or equipment.
Visual Representation: The diagrams typically show two KAO-5 switches positioned side-by-side. Incoming red and blue wires connect to specific input terminals on each switch. Output terminals on the switches are then connected to the load.
Three-Phase 380V Wiring
The diagrams also detail the wiring configurations for three-phase 380V systems using KAO-5 switches. While the general principle of connecting firelines and zerolines applies, three-phase systems involve multiple live conductors. The diagrams guide the user on connecting these power sources to the switches for appropriate power distribution.
Visual Representation: Similar to the single-phase diagrams, these show two KAO-5 switches. Connections are made for three-phase power input, with outgoing lines directed to the load, ensuring correct phase connections.
The information presented in these diagrams is consistent across multiple languages, with English serving as the primary reference for technical details and instructions.
