MATRIX MX-E5 Elliptical Total Body Owner's Manual

Owner's Manual for MATRIX models including: MX-E5 Elliptical Total Body, MX-E5, Elliptical Total Body, Total Body, Body

MATRIX MX-E5 (01) PDF MANUAL - Manual-Hub.com

File Info : application/pdf, 20 Pages, 1.68MB

MATRIX MX-E5 (01)

OWNER'S MANUAL
https://manual-hub.com/

ELLIPTICAL
https://manual-hub.com/

Table of Contents

1 . 0 ) IMPORTANT SAFETY INSTRUCTIONS

Read and Save These Instructions

Setting up the Elliptical Total Body

1.1) Installation Requirements

1.2) Preventative Maintenance and Cleaning Tips

2 . 0 ) USING MANAGER PREFERENCE MODE

2.1) Selecting US or Metric

2 . 2 ) Using C Safe

2.3) Setting Up Fit ConnexionTM

3 . 0 ) GETTING STARTED

3.1) Pausing the Unit

3.2) Console Description

3.3) Manual Operation

3.4) Operating Programs

3.5) Heart Rate Control

3 . 6 ) Constant Watts

4 . 0 ) EQUIPMENT SPECIFICATIONS

5 . 0 ) PARTS AND ASSEMBLY

5.1) E5 Exploded View

5 . 2 ) Parts List

5.3) Assembly Instructions

https://manual-hub.com/

1) Important Safety Instructions

1.0 IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
· This Elliptical Total Body Total Body is intended to for commercial use · To insure your safety and protect the equipment, read all instructions before operating the
MATRIX Elliptical Total Body Total Body.
When using an electrical product, basic precautions should always be followed, including the following:
DANGER To reduce the risk of electric shock: · Always unplug this equipment from the electrical outlet immediately after using and before
cleaning. Your MATRIX Elliptical Total Body Total Body is self-generating (requiring no external power source) and must be pedaled to power up the console.
WARNING To reduce the risk of burns, fire, electrical shock or injury to persons that may be associated with using this product: · An appliance should never be left unattended when plugged in. Unplug from outlet when
not in use and before putting on or taking off parts. · This product must be used for its intended purpose described in this Owner's Guide. Do not
use other attachments that are not recommended by the manufacturer. Attachments may cause injury. · To prevent electrical shock, never drop or insert any object into any opening. · Do not remove the side covers. Service should only be done by an authorized service technician. · Never operate the Elliptical Total Body with the air openings blocked, Keep the air openings clean, free of lint, hair and the like. · Never operate product if it has a damaged cord or plug, if it is not working properly, if it has been damaged, or immersed in water. Return the appliance to a service center for examination and repair. · Do not carry this appliance by supply cord or use cord as handle. · Keep any power cord away from heated surfaces. · Keep hands and loose clothing away from moving parts. · Close supervision is necessary when Elliptical Total Body is used by or near children, invalids, or disabled persons. · Do not use outdoors. · Do not operate where aerosol (spray) products are being used or where oxygen is being administered. · To disconnect, turn all controls to the off position, then remove plug from outlet · Connect this Elliptical Total Body to a properly grounded outlet only.
CAUTION If you experience chest pain, nausea, dizziness or shortness of breath, STOP exercising immediately and consult a physician before continuing.

SETTING UP THE ELLIPTICAL TOTAL BODY
Assembly instructions have been provided with your Elliptical Total Body. For your safety, please read and follow each of the steps in the assembly guide. To obtain a copy of the assembly guide, please contact MATRIX FITNESS SYSTEMS.
1.1 INSTALLATION REQUIREMENTS
Your MATRIX Elliptical Total Body is designed to be self contained and does not require a power supply to operate. Fit ConnexionTM requires a 9 volt battery and a 110 volt power supply to operate the monitor. Use only the power supply provided by the manufacturer, please contact MATRIX FITNESS for a replacement. CAUTION Use of the wrong power supply may cause damage to your Elliptical Total Body and /or entertainment device. Locate a level stable surface to position Elliptical Total Body.The Elliptical Total Body Total Body has four leveling feet located under the foot support.If your Elliptical Total Body wobbles in the location where you intend to use it, loosen the lock nut on the adjusting foot and adjust the feet until stable. Once level, lock the adjusting feet by tightening the lock nut to the frame.
1.2 PREVENTATIVE MAINTENANCE AND CLEANING TIPS
VERY IMPORTANT:
To maintain the smoothest motion on the Elliptical Total Body, wipe the wheel tracks clean DAILY with a damp cotton cloth. Weekly lift the wheels out of the channel and wipe clean with a damp cotton cloth and remove any debris from the track and plastic cover. Preventative maintenance and daily cleaning will prolong the life and look of your Matrix fitness equipment. Please read and follow these tips. · Position the equipment away from direct sunlight.The intensity of the UV light can cause dis-
coloration of plastics. · Locate your equipment in an area with cool temperatures and low humidity. · Clean with a soft 100% cotton cloth. · Clean with non-ammonia based cleaners. · Wipe handles, heart rate grips, and handlebars clean after each use. · Do not pour liquids directly onto your equipment. This can cause damage to the equipment
and in some cases electrocution. · Check pedal motion and stability. · Adjust leveling feet when equipment wobbles or rocks. · Maintain a clean area around equipment free from dust and dirt.

1
https://manual-hub.com/

2) Using Manager Preference Mode

2.0 USING MANAGER PREFERENCE MODE

Your MATRIX Elliptical Total Body is designed to allow you to customize settings for your preferences and diagnostics. The Manager Preference Mode can only be accessed while the Elliptical Total Body is powered up. Follow the instructions to adjust the Elliptical Total Body computer for your desired settings.

STEP 1

Power up the Elliptical Total Body by pedaling machine and Hold the UP and DOWN arrow keys for 3 seconds. The word Manager will appear in the alphanumeric window and will enter into the Manager Preference Setting automatically after 3 seconds. Continue to pedal until finished.

STEP 2 Select information you would like to view or change from the following list, by using the UP or DOWN arrows. Press ENTER to select.

Manager Preference Mode will allow you to view and set the following.

DISPLAY

CODE: INFORMATION

USER DEFINABLE DEFAULT VALUE

MIN.

Manager P0: Maximum program time

P1: Default time

P2: Default level

P3: Default weight

P4: Speed

P5: Machine

P6: TV IR

P7: Cardio Entertainment

P8: Accumulated Distance

P9: Accumulated Time

P10: Software Version

95 min 20 min
L1 150 lbs Miles
BI On On

5 5 L1 80 lbs Miles BI On On

MAX.
95 95 L20 400 lbs KM RE, EL Off Off

STEP 3 Use UP or DOWN arrows to increase or decrease values. STEP 4 Press START to save and enter selected values and exit to STEP 2. STEP 5 Exit by pressing Start. Screen will reset to Start up.

2.1 SELECTING US or METRIC
Follow the instructions above. Select P4 SPEED. Select miles or kilometers according to your location. The distance and weight will automatically be adjusted.

2.2 USING CSAFE
Matrix is the leader in entertainment availability. On the back of the console are three RJ45 receptacles. They are marked CSAFE IN, CSAFE OUT, and ENTERTAINMENT. Use the CSAFE IN to plug in any CSAFE device using the RJ45 connector. CSAFE OUT allows CSAFE products to be daisy chained together from one unit to the next. The connection is as follows;

CPU

UNIT 1
CSAFE IN CSAFE OUT

UNIT 2
CSAFE IN CSAFE OUT

UNIT 3 CSAFE IN

2.3 SETTING UP FIT CONNEXIONTM
Your equipment is preset to offer you the maximum benefit of your desired entertainment offering. Whether it is FIT CONNEXIONTM or other CSAFE entertainment packages, Matrix makes it easy to connect. Look on the back of the console and locate the receptacle labeled ENTERTAINMENT. This port is specific for audio and visual entertainment devices. CSAFE ready products can plug in and utilize the volume, channel and headphone connector.
When installing Fit Connection make sure you are using the power cord supplied with your package. Other power cords could cause malfunctions with your product.
Assemble the Fit Connection bracket by following the instructions supplied in your package. Make sure you feed the power cord and coaxial cable through the round hole at the top of the bracket. Insert the monitor and fasten with the screw provided.
Connect the coaxial cable and the power cord to the monitor.
Take the Fit ConnexionTM audio cord and plug it into the audio out on the back side of the monitor. The RJ45 needs to now be plugged into the Jack labeled Entertainment. This cord provides the audio to your headphones.
At the front base of the unit you will see the Fit ConnexionTM coaxial cable and power supply connectors. Connect the coaxial cable and the power supply. Turn the monitor on and see if it has power. Follow the instructions provided with your monitor to select language and input device options.

2
https://manual-hub.com/

3) Using the Elliptical Total Body

The E5 has been designed for users of all fitness levels. The E5 has linked upper and lower body motion designed to give a complete low impact body workout. The stride length is 22" long and over 8" of lift to accommodate even the tallest user. The E5 has wide pedals and sturdy handrails for easy mounting. After stepping on to the Elliptical, face the console, hold on to the center handrail or the left and right upper body grips. Use pedaling motion similar to a bike to begin exercising Follow the operating instructions to program your favorite workout.
3.1 PAUSING THE UNIT Your console has the ability to have a 30 second pause feature. On the back of the console is a battery cover. If the pause feature is not working try replacing the 9 volt battery by removing the screw and remove the battery cover. Replace the battery and cover.
3.2 CONSOLE DESCRIPTION
PROGRAMS Simple program view and selection buttons. Matrix Elliptical Total Body features seven programs.
START / QUICK START One touch Quick Start and Start any time during preference selection. U P / D O W N Easy information and level selection. E N T E R / S E L E C T S C R E E N / R E S E T This multi-function button enters information when
setting up programming options, toggles information displayed and if held down for 5 seconds resets the Elliptical Total Body to Start-up mode.

D I S P L AY V I E W These three buttons allow the user to customize the way the unit's lights are displayed.
E N T E RTA I N M E N T Control the CHANNEL and VOLUME of your attached TV or entertainment system. (Must have Fit Connexion TM or entertainment source connected)
H E A D P H O N E J A C K Located at the base of the console, just plug in a headset and use the ENTERTAINMENT buttons to adjust VOLUME. (Must have Fit ConnexionTM or entertainment source connected)
3.3 MANUAL OPERATION
MATRIX design makes using the programs as easy as one touch of a button. QUICK START Start pedaling and press QUICK START to begin workout. MANUAL MODE allows you enter desired time, level, and weight.
STEP 1 Select Manual program button on left of panel. Press Enter or wait 5 seconds. NOTE Selecting START will start program.
STEP 2 Select Time by using the UP or DOWN arrow keys. When finished Press Enter or wait 5 seconds.
NOTE Selecting START will start program.
STEP 3 Select Level by using UP or DOWN arrow keys. You can change the level at any time during workout. When finished, Press Enter or Wait 5 seconds.
NOTE Selecting START will start program.
STEP 4 Select Weight by using the UP or DOWN arrow keys. Press START or ENTER to begin workout. Display TIME Starting 3 Starting 2 Starting 1
3.4 OPERATING PROGRAMS
Your MATRIX Elliptical Total Body offers versatile programs to keep the user motivated. The following Instructions will guide you through simple steps to select INTERVALS, ROLLING, FAT BURN, and RANDOM programs.
STEP 1 Select the program button on left of panel. Press ENTER or wait 5 seconds. NOTE Selecting START will begin program.

3
https://manual-hub.com/

3) Using the Elliptical Total Body

STEP 2 Select Time by using the UP or DOWN arrow keys. When finished Press ENTER or wait 5 seconds.
NOTE Selecting START will begin workout.
STEP 3 Select Level by using UP or DOWN arrow keys. You can change the level at any time during workout. When finished, Press ENTER or Wait 5 seconds.
NOTE Selecting START will begin workout.
STEP 4 Select Weight by using the UP or DOWN arrow keys. Press START or ENTER to begin workout. Display TIME Starting 3 Starting 2 Starting 1
3.5 HEART RATE CONTROL
For your convenience, MATRIX FITNESS ELLIPTICAL TOTAL BODY comes standard with digital contact heart rate sensors and POLAR telemetry compatible. Locate the metal sensors on the handrail of the Elliptical Total Body. Notice there are two separate pieces of metal on each grip. You must be making contact on both pieces of each grip to get an accurate heart rate reading. You can grab these sensors in any program to view your current heart rate located in the lower left hand window marked Heart Rate.
HEART RATE PROGRAM Follow these easy Steps to enter into the Heart Rate Program.
STEP 1 Select TARGET HR program button on left of panel. Press Enter or wait 5 seconds. NOTE Selecting START will start program.
STEP 2 Select Time by using the UP or DOWN arrow keys. When finished Press Enter or wait 5 seconds.
NOTE Selecting START will start program.
STEP 3 Using the following chart, select Target Heart Rate by using UP or DOWN arrow keys. You can change the Target Heart Rate at any time during workout. When finished, Press Enter or Wait 5 seconds.
NOTE Selecting START will start program.
STEP 4 Select Weight by using the UP or DOWN arrow keys. Press START or ENTER to begin workout. Display TIME

Starting 3 Starting 2 Starting 1

POLAR TARGET HEART RATE ZONE

HR BEATS PER MINUTE
220

200

180

160

140

120

100

AGE

HEAVY

MODERATE

LIGHT

3.6 CONSTANT WATTS
Constant Watts program is a unique program that allows you to vary your cadence or RPM and the Elliptical Total Body's resistance will adjust accordingly to your selected goal. The quicker you pedal the less resistance for the goal selected.
Follow these easy Steps to enter into the Constant Watts Program.
STEP 1 Select CONSTANT WATTS program button on left of panel. Press Enter or wait 5 seconds. NOTE Selecting START will start program.
STEP 2 Select Time by using the UP or DOWN arrow keys. When finished Press Enter or wait 5 seconds.
NOTE Selecting START will start program.
STEP 3 Select Constant Watts goal by using UP or DOWN arrow keys. You can change the watts target at any time during workout. When finished, Press Enter or Wait 5 seconds.
NOTE Selecting START will start program.
STEP 4 Select Weight by using the UP or DOWN arrow keys. Press START or ENTER to begin workout. Display TIME Starting 3 Starting 2 Starting 1

4
https://manual-hub.com/

MACHINE WEIGHT
350 lbs 158.8 kg

>elliptical
MX-E5
SIZE
inches = 72" x 85" x 29" cm = 182.9 x 215.9 x 73.6

4) Equipment Specifications

S P E C I F I C AT I O N S
Product Name Foot Print Weight Stride Length Max User Weight Frame Construction Self Contained Resistance Type Resistance Levels Dual Action
PROGRAMS
One Button Quick Start Random (20 profiles) Target Heart Rate Interval Constant Watts Rolling Fat Burn
CLEANING BRUSH
Track Cleaning
PEDAL
Self Leveling Pedal Size Distance Between Pedals
HEART RATE
Polar Telemetry Contact Heart Rate
ENTERTAINMENT READY
Volume Control Channel Control Display View Control Coaxial Cable Connection Acc TV Power Connection Monitor Mount IR Port Head Phone Jack

E5 72"H x 85"L x 29"W 350 lbs = 158.8 kg 21" 400 lbs = 181.4 kg Aluminum/Steel Yes Generator 20 Yes
Yes Yes Yes Yes Yes Yes Yes
Yes
Yes 16"x7" 3.5"
Yes Yes
Yes Yes 3 Views Yes Yes Yes Yes Yes

5
https://manual-hub.com/

THIS PAGE INTENTIONALLY BLANK
https://manual-hub.com/

5) Parts & Assembly
>elliptical MX-E5
https://manual-hub.com/

5.1) E5 Exploded View
> elliptical
MX-E5

WATER BOTTLE

E09 Q13

P02 P03

AN1

P02

C24
Q06 AC1

E46 E34

E44 E46 E34

N10 Q07 Q03

E28
E09 Q08
AH1 C26
L02

AG2 Q23 Q10
Q20

C23 G08
Q09
G12 G16

E44 E28

AE1 C20 L01

AG1

C23 G08 AH1 L04 Q23 L03 Q10

Q20
G16
Q09 G12

FASTENERS AND ASSEMBLY TOOLS

REFERENCE SKETCH

DESCRIPTION

QUANTITY

L03

BUTTON HEAD BOLT (M8 x 15L)

C35

WASHER (10.2 x 20 x 10t)

C20

BUTTON HEAD BOLT (M10 x 75L)

C24

BUTTON HEAD BOLT (5 x 15L)

E44

WASHER

E46

BUTTON HEAD BOLT (M8 x 10L)

E48

BUTTON HEAD BOLT (M8 x 20L)

C26

BUTTON HEAD BOLT (M8 x 30L)

C23

BUTTON HEAD BOLT (M8 x 55L)

G12

BUTTON HEAD BOLT (M10 x 40L)

G16

SCREW (M10)

H04

AXIS

E34

BUTTON HEAD BOLT (M8 x 13L)

Q20

BUTTON HEAD BOLT (4 x 15L)

PHILLIPS DRIVER (4.5 x 50mm)

5mm ALLEN WRENCH

6mm ALLEN WRENCH

8mm ALLEN WRENCH

WRENCH

8
https://manual-hub.com/

NO.
AE1 AE2 AG1 AG2 AG3 AG3 AH1 AN1 AN2 AN2 AT1 E08 G07 Q01 Q02 R01 R02 AB1 AB2 AC1 AC2 AC3 AE1 AE2 AE3 AE4 AE5 AG3 AG3 AH1 AJ1 AR6 AR7 AT1 AZ1 B35 B36 B40 B41 B43 B44 B45 B46

DESCRIPTION
Right Pedal Arm Set Left Pedal Arm Set Right Handlebar Set Left Handlebar Set Middle Handlebar Set (Plate) Middle Handlebar Set (Texture) Lower-Link-Arm Set Console Set (English) Handpulse Grip Set (Plate) Handpulse Grip Set (Texture) Tension Wheel Set Roller Set Swivel Housing Set Right Side Cover Set Left Side Cover Set Drive Axle Set Pulley Axle Set Main Frame Front Curve Plate Console Mast Console Bracket TV Bracket w/Cables Right Pedal Arm Left Pedal Arm Right Pedal Frame Left Pedal Frame Crank Pin Housing Middle Handlebar (Plate) Middle Handlebar (Texture) Lower Link Arm ( 2 Pieces) Crank ( 2 Pieces) Axle Sleeve Set (A) Axle Sleeve Set (B) Tension Wheel Hardware Pack Mobile Wheel Axle Mobile Wheel Bushing Leveler Screw,Oval Tapping Screw,Plain Hex Socket Screw,Oval Head Hex Nut

S P E C I F I C AT I O N
4x15L M8x1.25Px15L M5x0.8Px12L M10x1.5P

NO.

DESCRIPTION

B47

Lower Board Fix Plate

B48

C Clip

B49

Handle Holder

B50

Hex Screw

C06

Swivel Axle

C07

Outer Console Mast Tube

C12

Middle Handlebar Fixing Plate

C17

Spacer

C18

C Clip-External

C20

Screw,Round Hex Socket

C22

Screw,Oval Tapping

C23

Screw,Round Hex Socket

C24

Screw,Oval Tapping

C25

Screw,Round Hex Socket

C26

Screw,Round Hex Socket

C27

Tighten Nut

C28

Plate Washer

C32

Screw,Oval Hex Socket

C33

Washer

C34

Console Mast Cover

C50

Console Mast Cushion Pad

E08

Roller

E09

Right Pedal Housing

E10

Left Pedal Housing

E16

Screw, Plain Head

E17

End Cap

E22

Screw,Round Hex Socket

E23

Copper Sleeve

E26

Connecting Axle

E27

Copper Sleeve

E28

Right Pedal Pad

E29

Left Pedal Pad

E31

Plate Washer

E32

C Clip-External

E33

Plate Washer

E34

Screw,Oval Hex Socket

E35

Ball Bearing

E36

Screw,Oval Head

E37

Screw,Round Hex Socket

E38

Nylon Nut

E39

Flat Washer

E40

Screw,Plain Hex Socket

E41

Wave Washer

9
https://manual-hub.com/

5.2) Parts List
>elliptical
MX-E5
S P E C I F I C AT I O N
SPC 2.0t WUSN-4039 PP M10x1.5Px55L SCM21
SS41 S-30 M10x1.5Px75L 4x25L M8x1.25Px55L (Bed) 5x15L M8x1.25Px15L M8x1.25Px30L M33x2.0Px15t 8.2x16x1.0t M8x1.25x45L 8.2x18x1.5t PVC
PU ABS ABS M5x0.8Px12L ABS M8x1.25Px55L (Bed)
SS41
25.5x38x2.0t S-25 8.2x22x3.0t M8x1.25Px13L 6002ZZ M5x0.8Px8L M10x1.5Px60L M10x1.5P 15.2x_20x3.0t M5x0.8Px12L (Bed) 25.5x34x2t

5.2) Parts List

> elliptical
MX-E5

NO.

DESCRIPTION

E42

Brush

E43

Copper Sleeve, Pedal Arm

E44

Wave Washer

E45

Hex Nut

E46

Screw,Oval Hex Socket

E47

Flat Washer

E48

Screw,Oval Hex Socket

E49

Roller Washer

E50

Nylon Nut

F01

Roller Rail

F02

Screw,Oval Head

F03

Roller Rail Rubber Pad

G08

Swivel Housing Cover

G10

Ball Bearing

G11

C Clip

G12

Screw,Round Hex Socket

G14

Flat Washer

G15

Screw,Oval Hex Socket

G16

Nylon Nut

G18

Foam Grip

G19

Foam Grip

H04

Bushing Axle

H05

Axle For Rocker Arm

H08

Bearing

H09

Screw,Round Hex Socket

H10

Copper Sleeve, Pedal Arm

H11

Hex Nut

H12

Connect Slice

J04

Round Plate

J05

Screw,Plain Hex Socket

J06

Hex Nut

J07

Spring

L01

Right Stabilizer Cover

L02

Left Stabilizer Cover

L03

Screw,Oval Hex Socket

L04

Leveler

N03

Battery Cover

N06

Membrane Key (Left)

N07

Membrane Key (Right)

N08

Membrane Key (Lower)

N09

Bookshelf

N10

Watter Bottle Holder

N12

Earphone Ring

S P E C I F I C AT I O N
PP
20.5x29x1.5t M14x1.5Px7H M8x1.25Px10L 10.2x_25x1.5t M8x1.25Px20L
M8x1.25P AL M5x0.8Px12L
AL(6063) 6006ZZ R-55 M10x1.5Px40L 10.5x18x2.0t M8x1.25Px50L M10x1.5P (Bed) 31D*3T*483L
SS41 SCM21 PHS 16(M16x2) M8x1.25Px50L
M16x2.0Px7.0L EP34-1(EP23)
M8x1.25Px20L M16x1.5P SWP
M8x1.25Px15L
ABS MATRIX U5/R5/E5 MATRIX U5/R5/E5 MATRIX U5/R5/E5 ABS ABS ABS

NO.

DESCRIPTION

N13

Screw,Oval Tapping

N15

Overlay (English)

N15

Overlay (Holland)

N15

Overlay (Germany)

N15

Overlay (Italy)

N20

Inner Receiver

N26

Screw, Round Head

N27

Hex Nut

P02

Console Cable

P03

E-Port Power Connecting Cable

P04

E-Port Tv Signal Cable

P05

Controller Connecting Cable

P06

Power Resistance

P07

Handpulse Cable

P13

End Protect Cover

P16

Ferrite Cord

P18

Ear Extended Cable

P19

Power Transfer Cable

P20

E-Port Control Board

Q01

Right Side Cover

Q02

Left Side Cover

Q03

End Cap

Q04

Right Mast Cover

Q05

Left Mast Cover

Q06

Right Mast End Cap

Q07

Left Mast End Cap

Q08

Lower Mast Cover

Q09

Outer Cap, Lower Link Arm

Q10

Inner Cap, Lower Link Arm

Q11

Rear Rail Cover

Q12

Pedal Arm Cover

Q13

Pedal Cover

Q15

E-Port Fixing Plate

Q19

End Cap, Round Plate

Q20

Screw,Oval Tapping

Q21

C Clip

Q22

Connecting Plate, Side Cover

Q23

Snake Abdomen

Q24

End Cap

Q25

Fixed Buckle Plug

Q26

Fixed Buckle Seat

Q27

Screw,Oval Tapping

R03

_235 Pulley

S P E C I F I C AT I O N
3x10L (Bed) English Holland Germany Italy 39022177 M3x0.5Px35L M3x0.5P 1550(XAP-07V-1+H6657P-2+H6657R1-8) 1550(XAP-02V-1+H6657P-2) 1550(RG-6)x2 450(3.96-5P+HL20P-03) 400W10_,650(3.96-4P,VH) 600 (H6657R1-2+110) (KSS)EP-1113 FH0900B-2 185(3.5+3P) 1050(XAP-02V-1+H6657R1-2)
ABS ABS PVC ABS ABS ABS ABS PVC ABS ABS ABS ABS ABS ABS ABS 4x15L WUSN-4039 SPC PVC Nylon
PVC 4x12L

10
https://manual-hub.com/

NO.

DESCRIPTION

R04

_254 Pulley

R09

Poly-V Belt

R11

Poly-V Belt

R14

Tighten Nut

R16

2 End Key

R17

C Clip-External

R40

2 End Key

R48

Look Nut

S01

Generator (US)

S01

Generator (CE-European)

S09

Lower Control Board

S10

Hex Nut

S12

Screw,Oval Head

S13

Screw,Round Hex Socket

S18

Screw,Round Hex Socket

S50

Hex Nut

S51

Nylon Nut

S52

Eye Bolt

S53

Fixing Plate, Eye Bolt

S54

Plate Washer

S55

Screw,Oval Head

T01

Tension Wheel

T04

Ball Bearing

T05

Flat Washer

T07

Screw,Plain Hex Socket

T08

Nylon Nut

T09

Screw,Round Hex Socket

T10

Nylon Nut

V03

Warning Decal

V04

Matrix Decal

X01

Carton

Z02

L-Type Hex-Wrench (M5)

Z03

L-Type Hex-Wrench (M6)

Z04

L-Type Hex-Wrench (M8)

Z05

Sleeve Wrench (17Mm)

Z06

Cross-Driver

Z07

Crank Puller Tool

Z15

Single Foam Tape

S P E C I F I C AT I O N
FC20 480-J8 430-J12 AN06(M30x1.5P) (Bed) 6x6x20L S-30 6x6x14L M30x1.5Px10t 210 MX/600 (US) 210 CE MX/600 (European) U5,R5,E5 H002 3/8"-26UNCx4H M5x0.8Px12L M5x0.8Px12L M8x1.25Px45L 3/8"-26UNF 1/4"-20UNC (Bed) 1/4"-20UNCx70L,10 1.5t SPC 1/4"x15x1t M5x0.8Px15L (Bed) SS41 6304ZZ 20.2x30x0.65t M8x1.25Px45L M8x1.25P M10x1.5Px50 M10x1.5P
EP23-1 M5 M6 M8 #17 4.5*50 MX-E5 15x25x2.5t

11
https://manual-hub.com/

5.2) Parts List
>elliptical
MX-E5

5.3) Assembly Step 1
> elliptical
MX-E5

L02

L01

L03

STEP 1

12
https://manual-hub.com/

WATER STAND

FOOT AXLE COVER

FOOT PAD

RIGHT GROUND COVER

LEFT GROUND COVER

INSIDE LINK COVER

OUTSIDE LINK COVER

CONSOLE MAST BOOT

ROTATE COVER

RIGHT CONSOLE MAST COVER 1

LEFT CONSOLE MAST COVER

TV STAND PLUG

STEP 2

5.3) Assembly Step 2
>elliptical
MX-E5

AC1 P02
P04 C20

P03 Q08
C26

13
https://manual-hub.com/

5.3) Assembly step 3
> elliptical
MX-E5
AN1
Q06 C24

P02 P03
P02

WATER BOTTLE

Q07

Q03

N10

14
https://manual-hub.com/

STEP 3

E46 E34

E34 E44 E46

E28 E09
Q13

E44

AE1

AH1

15
https://manual-hub.com/

5.3) Assembly Step 4
>elliptical
MX-E5
STEP 4

STEP 5
AC1 G08 C23
AG1

5.3) Assembly Step 5
>elliptical
MX-E5
C23 G08
AG2

Q10 Q20 Q23

A09 AH1
G12

G16
AG1 H04

16
https://manual-hub.com/

MATRIX FITNESS SYSTEMS, INC. 1 4 11 B R O A D W AY, N E A L B U Q U E R Q U E , N M 8 7 1 0 2 TOLL FREE 8 6 6 . 6 9 3 . 4 8 6 3 FAX 5 0 5 . 2 4 2 . 4 7 2 5
www.matrix-fitness.com
https://manual-hub.com/

References

Manual-Hub.com - Free English product PDF Documents!