Instruction Manual for VEVOR models including: SX005, SX006, SX005 SX006 Storage Cabinet Type, SX005 SX006, Storage Cabinet Type, Cabinet Type, Type, Cabinet
STORAGE CABINET TYPE Model: SX005;SX006 Model: SX005;SX006 STORAGE CABINET TYPE This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product. 1 ASSEMBLYPRECAUTIONS 1. These instructions must be followed when assembling. Incorrect assembly may result in damage to the product. 2. Wear safety goggles and heavy-duty work gloves during assembly. 3. Do not assemble when tired or when under the influence of alcohol, drugs or medication. 4. Products are used only as intended 5. Keep the assembly area clean and well-lit. 6. Keep bystanders out of the area during assembly. USE PRECAUTIONS WARNING: TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING: 1. This product is not a toy. Do not allow children to play with or approach this item. 2. Use as intended only. Do not sit or stand on the product. 3. Inspect before every use. Do not use it if parts are loose or damaged. GENERAL GUIDELINES 1. Please read the following instruction carefully and use the product accordingly. 2. Please keep this manual and hand it over when you transfer the product. 3. This summary may not include every detail of all variations and considered steps. Please contact us when further information and help are needed. 4. Before assembly, please make sure all accessories are intact. Please handle it gently to avoid bumps, damage or paint chipping when unpacking the product. 5. Bamboo products may have splinters or cracks due to its fiber structure. Please check the product carefully before assembly. 6. Check the tightness of screws and parts regularly. 7. Do not place it in humid place to prevent mildew. 8. Avoid long period of sun exposure. If stain is found, wipe the product with a wet cloth, and dry it in a ventilated place. 2 PARTS LIST No. Name 1 Left side plate 2 Right-side plate 3 Baffle plate 4 Top plate 5 Bottom plate Parts Quantiy No. Name 1PCS 6 Cover plate 1 PCS 7 handle 1 PCS 8 M5*30 screw 1PCS 9 dowel 1PCS 10 M3*15 screw Parts Quantiy No. 1PCS 11 1 PCS 12 Name footing laminate 14 PCS 13 M3*8 screw 7 PCS 14 wrench 1 PCS Parts Quantiy 3PCS 1PCS 3PCS 1PCS 3 ASSEMBLY STEPS STEP1 As shown in the figure, install the Left side plate (1) and the Right-side plate (2) with M5*30 screws (8) 2 12 STEP2 Install Bottom plate (5) with M5*30 screws (8 5 STEP3 Install the dowel (9) onto the Baffle plate (3) 9 3 4 STEP4 Insert the Baffle plate (3) and tighten it with M5*30 screws8 3 STEP5 Install the handle (7) onto the cover plate (6) with screws (10) 6 7 5 STEP6 As in Step 3, install the dowel (9) onto the cover plate, and then install the cover plate into the frame and lock the screws8 9 STEP7 Install the Top plate (4) 6 4 6 STEP8 Install the footing (11) withe the screws (13) 11 13 STEP9 Open the Cover plate. Insert the dowel (9) into the left and right side panels and the right board, then place the laminate (12) in. Finished 12 7 CLEANING - For cleaning, wipe the surface with a damp (not wet) cloth or wipe dry with a clean lint free cotton cloth. - Wood products cleaning solution or similar cleaning solution can be used to clean the surfaces and let dry 8 Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN. Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 EC REP E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main. YH CONSULTING LIMITED. UK REP C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AXWPS 文字