SVEN RX-575SW Wireless Mouse User Manual
Introduction
Thank you for purchasing the SVEN mouse! Please read this User's Manual before using the unit and retain this User's Manual in a safe place for future reference.
Copyright © SVEN PTE. LTD. Version 1.0 (V 1.0). This Manual and information contained in it are copyrighted. All rights reserved.
Trademarks All trademarks are the property of their legal holders.
Notice of Responsibility Restriction Despite the exerted efforts to make this Manual more exact, some discrepancies may occur. The information in this Manual is given on «as is» terms. The author and the publisher do not bear any liability to a person or an organization for loss or damage which has arisen from the information contained in this Manual.
Safety Precautions
- Protect your mouse from high humidity, dust or high temperatures.
- Do not use gasoline, spirit or other dissolvents for cleaning. This may cause damage to the surface. Clean the device with a soft cloth.
- Do not attempt to disassemble or repair your device.
- Protect the device against powerful shocks and falls – they may damage the internal electronics.
- Dispose of in accordance with regulations for the disposal of household and computer equipment.
- Shipping and transportation equipment is permitted only in the original container.
- Does not require special conditions for realization.
Appointment
The RX-575SW is an input device. It should be used for input (entering) information into the computer and operation on it.
Package Contents
- Wireless mouse – 1 pc
- 2.4 GHz receiver – 1 pc
- AA battery – 1 pc
- User manual – 1 pc
Special Features
- Switching DPI modes
- Rubber scroll wheel
- Plug&Play technology
System Requirements
- Windows/Mac OS
- Free USB port
Switch Between Modes 2.4GHz and Bluetooth
By default, 2.4GHz mode works.
- To switch to Bluetooth mode, press and hold the "DPI" button for 3 seconds. The green indicator LED will be lighting for 3 seconds.
- Click the "blue button" on the mouse bottom. The green indicator LED will flash, which means it is in pair status.
- Turn on the computer's Bluetooth program and find the new Bluetooth device.
- Pair the new Bluetooth device and finish the connecting. Then Bluetooth setup is okay and you can work freely.
- To get back to 2.4GHz mode, press the DPI button for 3 seconds again.
Troubleshooting
| Problem | Solution |
|---|---|
| The mouse is not working. | 1. Disconnect the mouse from your PC and check the connector pins for possible damage. If there is no external damage found and the connector pins are OK, connect the mouse to your PC again. 2. Address your nearest authorized service center. |
If none of the above-mentioned solutions resolves the problem, please consult a nearest authorized service center. Never try to repair the device on your own.
Warranty Card
Model:
Serial number:
Date of Sale:
Seller:
Stamp of the Seller:
Technical Support
Technical support is available on the website: www.sven.fi.
